EMC/EMI Test & Measurement Equipment - The EMC Shop

EMC Test Equipment Categories

Transient Generators

EMI Receivers/EMC Analyzers

RF Power Amplifiers

Electric Field Strength Measurement

RF Conducted Immunity Test Systems

EMC Antennas

Line Impedance Stabilization Networks (LISN's)

EMC Probes

EM Coupling Clamps

Coupling Decoupling Networks (CDN's)

RF Current Probes/Monitors

EMC/EMI Signal Generators

Calibration Equipment

Software for EMC Testing

EMC Test Equipment Test Equipment, Systems & Solutions

Narda PMM EP-601 10 kHz – 9.25 GHz Broadband Active Electric Field Probe

SKU: 5271

Application/Test Type: Monitoring Electric Field Strengths

Field Strength Range: 0.5 to 500 V/m (0.01 V/m)

Frequency Range: 10 kHz to 9.25 GHz

Standards Met: IEC/EN 61000-4-3

Interfaces: Fiber-Optic

Battery Life: 60-80 hours

Cost New:

Was:

Price Now:

$905.00 - $9,000.00

Inquire for Availability

ORDERING OPTIONS
Rent Agilent (HP) E7401A EMC Analyzer, 9 kHz to 1.5 GHz

SKU: 10260

Applications: Conducted Emissions, Radiated Emissions, Spectrum Analyzers for EMC

Pre-programmed Test Limits: FCC Part 15, CISPR 22, MIL-STD-461

Max Frequency: 26.5 GHz

Min Frequency: 9 kHz

Sweep/Test Speed: Moderate

Amplitude Accuracy: 0.37 dB

Resolution Bandwidth: 1 Hz to 5 MHz

Cost New:

Was:

Price Now:

$995.00
Teseq CDN HSS-2 Surge CDN for High Speed Communication Lines

SKU: 6195

Application/Test Type: ISDN, 10/100BaseT, 1000BaseT etc., switchable per jumper, PoE applicable; 2 kV* (1.2/50 μs pulse as per IEC/EN 61000-4-5); Max. surge test current: 50 A (8/20 μs pulse as per IEC/EN 61000-4-5)

Current Rating: 1 A (rated for Power over Ethernet)

Insertion Loss: 9 dB at 100 MHz

Mains & EUT Connections: RJ45 female; HV connector female (Fischer D103A023)

Standards Met: IEC 61000-4-5 Ed. 3

Voltage Rating: 100 VDC between pairs

RENTAL ONLY

VIEW PRODUCT
Teseq CDN 117 2-Wire Data Line Coupling Network

SKU: 6542

Weight: 2.1 kg (4.6 lbs)

Application/Test Type: 1.2 / 50 μs pulse up to 6.6 kV

Coupling: INA 170: spark gap device, 90 V trip voltage; INA 174A: capacitor 0.5 μF

Current Rating: 1.5 Amps

Decoupling chokes 1 kHz: 20 mH nominal

Dimensions: 300 mm x 55 mm x 80 mm

Ohmic resistance per path: Less than 2.5 Ω

RF Connector: 4 mm safety banana; Fischer 103

Series resistor: 2 x 40 Ω, 6 W

Transmission 3 dB BW: 800 Hz

Voltage Rating: 250 Volts AC/DC

Cost New:

Was:

Price Now:

$3,080.00

In Stock

ORDERING OPTIONS
SS100M Solid State RF Power Amplifier Series

SKU: 9169

Operating Frequency Range: 100 kHz to 100 MHz

Power Output: up to 1,500 Watts

Max RF Input Power: 0 dBm (1 mW) max

Overdrive Protection: up to +10 dBm for no damage

Impedance: 50 Ohms

Applications: Radiated Immunity

Inquire for Availability

VIEW PRODUCT Cart
3ctest CDN 405M40-5 Surge Coupler for Unshielded Unsymmetric Lines

SKU: 30188

Test Standards: EN/IEC 61000-4-5

Applications: Data lines Unshielded, Unsymmetrical Surge Immunity

Data Rate: 100 Kbit/s

Surge Voltage Handling: 6kV

Inquire for Availability

VIEW PRODUCT Cart
AR FA7218 Electric Field Measuring Kit

SKU: 8209

Frequency Range: 2 MHz – 18 GHz

Field Strength Measurement Range: 14–1400V/m

Linearity: ±0.5dB

Amplitude Accuracy: ±1.0dB typ.

Test Standards: MIL-STD-461 RS103, DO-160 Section 20

Applications: Radiated Immunity

Typically In Stock

VIEW PRODUCT Cart
Langer EMV MFA 01 Micro Probe Set 1 MHz to 6 GHz

SKU: 30012

Frequency Range: 1 MHz to 6 GHz

Resolution: 200 µm

Applications: Conducted Emissions, Radiated Emissions

Test Standards: CISPR, MIL-STD-461, FCC

Cost New:

Was:

Price Now:

$195.00 - $2,819.00

Inquire for Availability

ORDERING OPTIONS
Solar 8116-50-TS-100-N MIL-STD-461 EMC LISN

SKU: SO-8116-TS

Test Standards: MIL-STD-461

Applications: Military EMC Testing, Conducted Emissions Testing

Max Current: 100 Amps

Frequency Range: 10 kHz – 30 MHz

Coupling Capacitor: 0.25 µF

RF Connector: N-Type(f)

Inductance: 50 µH

Cost New:

Was:

Price Now:

$195.00 - $2,975.00

Typically In Stock

ORDERING OPTIONS
Schwarzbeck NNBL 8226 MIL-STD-461 LISN

SKU: 6862

Frequency Range: 9 kHz - 100 MHz

Max. cont. current: 70 A

Max. current (limited time): 100 A

Max Voltage (DC): 500 V

Max. Voltage (AC 50/60 Hz): 250 V

Max. Voltage (AC 400 Hz): 140 V

Impedance: (50μH + 5 Ω) || 50 Ω (+/- 20 %)

DC-Resitance mains-EuT: ca. 10 mΩ

EUT Connectors: Wing terminals

Test Standards: MIL-STD-461

Cost New:

Was:

Price Now:

$2,775.00

Typically in Stock

ORDERING OPTIONS
Amplifier Research 15S1G3 RF Power Amplifier

SKU: 6327

RF Power Amplifier: 800 MHz to 3 GHz

Rated Power Output: 15 Watts Minimum

Input for Rated Output: 1.0 Milliwatt Maximum

GAIN (at maximum setting): 42 dB minimum

Input Impedance: 50 ohms

Output Impedance: 50 ohms, nominal

1 LEFT

VIEW PRODUCT Cart
Amplifier Research 100A400AM20 4 kHz - 400 MHz, 100 Watt RF Amplifier for BCI Testing

SKU: 12087

Weight: With Cabinet 18.5 kg (41 lbs) Without Cabinet 10.4 kg (23 lbs)

Dimensions: With cabinet: 50.3 x 15.5 x 55.1 cm (19.8 x 6.1 x 21.7 in) Without Cabinet: 48.3 x 13.2 x 55.1 cm (19 x 5.2 x 21.7 in)

Flatness: FLATNESS: ±1.0 dB typical, ±1.5 dB maximum

Frequency Range: 4kHz–400MHz

Gain: GAIN (at maximum setting): 50 dB minimum GAIN ADJUSTMENT (Continuous Range) : 20 dB minimum

Impedance: 50 ohms

Input: 100-240 VAC, 50/60Hz, 500 watts

Output: POWER OUTPUT @ 3dB COMPRESSION: Typical: 125 watts, Minimum: 100 watts POWER OUTPUT @ 1dB COMPRESSION: Typical: 85 watts, Minimum: 75 watts

RF Connector: Type N female

RF Input Voltage: 1.0 milliwatt maximum for rated output

VIEW PRODUCT Cart