EMC Test Equipment

EMC Test Equipment Test Equipment, Systems & Solutions

• 

  Solar 8116-50-TS-100-N MIL-STD-461 EMC LISN

  SKU: SO-8116-TS

  Test Standards: MIL-STD-461

  Applications: Military EMC Testing, Conducted Emissions Testing

  Max Current: 100 Amps

  Frequency Range: 10 kHz – 30 MHz

  Coupling Capacitor: 0.25 µF

  RF Connector: N-Type(f)

  Inductance: 50 µH

  Cost New:

  Was:

  Price Now:

  $195.00 - $2,975.00

  Typically In Stock

  ORDERING OPTIONS

• 

  Schwarzbeck NNBL 8226 MIL-STD-461 LISN

  SKU: 6862

  Frequency Range: 9 kHz - 100 MHz

  Max. cont. current: 70 A

  Max. current (limited time): 100 A

  Max Voltage (DC): 500 V

  Max. Voltage (AC 50/60 Hz): 250 V

  Max. Voltage (AC 400 Hz): 140 V

  Impedance: (50μH + 5 Ω) || 50 Ω (+/- 20 %)

  DC-Resitance mains-EuT: ca. 10 mΩ

  EUT Connectors: Wing terminals

  Test Standards: MIL-STD-461

  Cost New:

  Was:

  Price Now:

  $2,775.00

  Typically in Stock

  ORDERING OPTIONS

• 

  Amplifier Research 15S1G3 RF Power Amplifier

  SKU: 6327

  RF Power Amplifier: 800 MHz to 3 GHz

  Rated Power Output: 15 Watts Minimum

  Input for Rated Output: 1.0 Milliwatt Maximum

  GAIN (at maximum setting): 42 dB minimum

  Input Impedance: 50 ohms

  Output Impedance: 50 ohms, nominal

  1 LEFT

  VIEW PRODUCT Cart

• 

  Amplifier Research 100A400AM20 4 kHz - 400 MHz, 100 Watt RF Amplifier for BCI Testing

  SKU: 12087

  Weight: With Cabinet 18.5 kg (41 lbs) Without Cabinet 10.4 kg (23 lbs)

  Dimensions: With cabinet: 50.3 x 15.5 x 55.1 cm (19.8 x 6.1 x 21.7 in) Without Cabinet: 48.3 x 13.2 x 55.1 cm (19 x 5.2 x 21.7 in)

  Flatness: FLATNESS: ±1.0 dB typical, ±1.5 dB maximum

  Frequency Range: 4kHz–400MHz

  Gain: GAIN (at maximum setting): 50 dB minimum GAIN ADJUSTMENT (Continuous Range) : 20 dB minimum

  Impedance: 50 ohms

  Input: 100-240 VAC, 50/60Hz, 500 watts

  Output: POWER OUTPUT @ 3dB COMPRESSION: Typical: 125 watts, Minimum: 100 watts POWER OUTPUT @ 1dB COMPRESSION: Typical: 85 watts, Minimum: 75 watts

  RF Connector: Type N female

  RF Input Voltage: 1.0 milliwatt maximum for rated output

  VIEW PRODUCT Cart

• 

  IEC/EN 61000-4-X Test Rack for Conducted Immunity Certification

  SKU: 11195

  Test Capabilities: Combination Wave Surge Immunity , EFT/Burst, Dips Interrupts & Variations

  Standards Met: IEC 61000-4-5, IEC 61000-4-4, IEC 61000-4-11, IEC/EN 61000-4-12

  Applications: Electrical Transient and Noise, Surge Immunity, Power Failures

  Test Setup: Conducted Immunity/Susceptibility Test Setup

  Max EUT Power: 600 Voltas @ 100 Amps

  Peak inrush current capability: 500 A (at 230 V)

  EFT/Burst Pulse Output Capability: 4.8 kV

  Combination/Wave Surge Output Capability: 4.4 kV (in 1 V steps)

  Generic Standards: IEC 61000-6-1, IEC 61000-6-2

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Amplifier Research 125S1G6 0.7 - 6 GHz Microwave Amplifier 125W

  SKU: sku-1068

  Max Frequency: 6 GHz

  Min Frequency: 800 MHz

  Output Power: 125 Watts

  Applications: Radiated Immunity, Automotive, Medical

  Standards: IEC 61000-4-3

  Gain: 52 dB

  AC Input Power: 220V/1PH

  VIEW PRODUCT Cart

• 

  3ctest TIS 700 Automotive Transient Simulator ISO 7637

  SKU: 11772

  2 reviews

  Test voltage: 25 - 700 Volts

  Max EUT DC Voltage (W/ Built In CDN): 60 Volts

  Max EUT DC Current (W/ Built In CDN): 30 Amps

  Standards Met: ISO 7637, SAE J1455, and OEM Specific Standards

  Applications: EMC Testing on EV Electric Vehicles Batteries & Charging Stations, Automotive Electrical Disturbances

  Cost New:

  Was:

  Price Now:

  $1,975.00 - $22,500.00

  In Stock

  ORDERING OPTIONS

• 

  EMC Partner ESD3000 ESD Generator

  SKU: 10723

  Weight: 1.7 kg

  Battery: at least 8 hour battery life

  Voltage Range: .08 up to 30kV depending on module type

  Pre-Programmed IEC Levels: Yes

  Resolution: 100V steps

  Standards Met: Depending on Module: IEC 61000-4-2, ISO 10605, RTCA DO-160, Mil-STD-464, Mil-STD-883, Mil-STD-750D

  Cost New:

  Was:

  Price Now:

  $795.00 - $2,195.00

  Typically In Stock

  ORDERING OPTIONS

• 

  Rohde & Schwarz ESRP7 EMI Test Receiver per CISPR 16-1-1

  SKU: 22721

  Frequency Range: 9 kHz to 7 GHz

  SSB Phase Noise: –90 dBc (1 Hz) (typ.)

  Frequency Response: 100 kHz ≤ f ≤ 7 GHz, < 3 dB

  Dynamic Range: 110 dB

  RF Output Connector: N Type Female, 50 Ω

  VSWR: 1.3, nominal

  Applications: Differences Between EMI Test Receivers and Spectrum Analyzers

  EMC Standards: CISPR 16-1-1, ANSI C63.2, MIL‑STD‑461 and FCC

  CALL FOR LEAD TIME

  VIEW PRODUCT Cart

• 

  Amplifier Research PM2002 RF Power Meter

  SKU: 1046

  Interfaces: Inputs: Rear panel HEAD connectors and rear panel IEEE-488 connector standard. Outputs: Rear panel PWR/REF connector, 0dBm, 50 MHz. Rear panel RECORDER BNC connector, 0 to 10V into 1mW.

  Frequency Range: 10 kHz to 40 GHz, power head dependent

  Channels: 2

  Power Measurement Range: -70dBm to +44dBm, power head dependent

  Cost New:

  Was:

  Price Now:

  $250.00 - $2,750.00

  IN STOCK

  ORDERING OPTIONS

• 

  Rent Fischer F-52 Current Monitor Probe 10kHz – 500MHz

  SKU: 30067

  Top Frequency Range: 500 MHz

  Bottom Frequency Range: 10 kHz

  AC Current Handling (DC-400Hz): 350 Amps

  RF Current Handling (CW/Pulse): 50/100 Amps

  Applications: RF Current Monitoring, EMC BCI Tests, Military EMC Testing

  Test Standards: DO-160 Section 20, MIL-STD-461

  Style: Clamp On

  Diameter: 1.5"

  Transfer Impedance: 8 Ohm

  Test Standards: MIL-STD-461 CE101

  Ships within 24 hours.

  VIEW PRODUCT

• 

  Haefely PSURGE 8000 EMC Surge Platform with Expandable PIM Modules

  SKU: 11411

  Applications: Surge immunity - Combo Wave, Ring Wave and Oscillatory Waves

  Surge/Combination Wave: IEC/EN 61000-4-5 Ed. 1 & 2, ANSI C62.45

  Ring Wave: EN/IEC 61000-4-12, IEC/EN 61000-4-5 Ed. 1 & 2, ANSI C62.45

  Damped Oscillatory Wave: EC 61000-4-18, ANSI C37.90, IEC 60255-22-1, IEEE 1613

  Telecom Surge: IEC/EN 61000-4-5 , ITU K-series and IEC 60950

  In Stock

  VIEW PRODUCT Cart