EMC Test Equipment

EMC Test Equipment Test Equipment, Systems & Solutions

• 

  Fischer/FCC F-130A-1 Bulk Current Injection Probe

  SKU: 11662

  Connector type: Type-N

  Dimensions: Inner diameter: 40 mm Outer diameter: 127 mm Height: 70 mm

  Frequency Range: 10kHz - 400MHz

  Input Power: 100 watts

  Insertion loss: less than 7dB/3MHz - 350MHz

  Cost New:

  Was:

  Price Now:

  $695.00 - $1,295.00

  Inquire for Availability

  ORDERING OPTIONS

• 

  Schwarzbeck NNLK 8121 100 Amp Line Impedance Stabilization Network

  SKU: 10857

  Application/Test Type: Power Line Conducted Emissions Tests

  Current Rating: 100 Amperes

  Standards Met: ANSI C63.4, CISPR 16-1-2

  Frequency Range: 9 kHz - 30 MHz

  Inductors: 50 µH

  Insertion loss: less than 0.7 dB

  Isolation: more than 40 dB

  Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack

  RF Connector: RF Measurement Port 50Ω - N-Type (female)

  Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V

  Cost New:

  Was:

  Price Now:

  $48.00 - $795.00

  Typically In Stock

  ORDERING OPTIONS

• 

  Haefely ONYX 16 ESD Simulator Gun for IEC 61000-4-2

  SKU: 10536

  1 review

  Air Discharge Voltage Range: 1 to 16 kV or 1 to 30 kV

  Battery: at least 16 hour battery life

  Contact Discharge Voltage Range: 1 to 16 kV or 1 to 30 kV

  Frequency Capabilities: single/0.1/0.2/0.5/1/2/5/10/20 Hz

  Holding Time: More than 5 sec

  Polarity: positive & negative

  Pre-Programmed IEC Levels: Yes

  Resolution: 100V steps

  Standards Met: IEC/EN 61000-4-2, ISO 10605

  Cost New:

  Was:

  Price Now:

  $295.00 - $1,495.00

  Ships Same Day

  ORDERING OPTIONS

• 

  EFT-CAL-KIT Burst Generator Calibration Kit for IEC 61000-4-4

  SKU: 10518

  Weight: Appprox.140g

  Connectors: Input: BNC or SHV, Output: BNC

  Cross talk attenuation: 54dB, 60dB

  Frequency Range: -3dB bandwidth: 400MHz

  Impedance: EFT-AT50 input 50 Ω @ output 50 Ω | EFT-AT1000 input 1000Ω @ output 50Ω

  Pulse voltage (open circuit): 8kV

  Standards Met: IEC/EN 61000-4-4, ISO7637.2-p3

  Voltage Rating: EFT-AT50: 500:1 | EFT-AT1000: 1000:1

  Cost New:

  Was:

  Price Now:

  $2,950.00 - $3,250.00

  IN STOCK

  ORDERING OPTIONS

• 

  EM Test ACS 503N30 AC Voltage Source for Harmonics & Flicker

  SKU: 1312

  Applications: Flicker and Harmonics Testing

  Test Standards: IEC 61000-3-11, IEC 61000-3-12, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-7, IEC 60601-1-2 and more

  Outpur Power: 30 kVA (300 Volts)

  Output Current: inductive load: 41 A (43 A), resistive: 34 A (33 A), capacitive: 27 A (26 A) cont., 78 A 79 A) for 3 s, 300 A repetitive peak

  Frequency Range: 10 to 80 Hz

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  EMCO (ETS-Lindgren) 3810-2 LISN, NEMA, 9 kHz - 30 MHz, 10 Amps

  SKU: 11287

  Application/Test Type: Power line conducted emissions tests

  Current Rating: 10 Amps

  Dimensions: 8.7 x 15 x 6 inches / 22.2 x 38.1 x 15.2 cm

  Frequency Range: 9 kHz to 30 MHz

  Inductors: 50 µH/250µH

  Mains & EUT Connections: NEMA typical. (SCHUKO and British available upon request)

  RF Connector: 50Ω BNC Monitor

  Standards Met: FCC Part 15, VDE 0871, VDE 0875

  Voltage Rating: 250 VAC (Line to Ground)

  Cost New:

  Was:

  Price Now:

  $195.00 - $1,975.00

  In Stock

  ORDERING OPTIONS

• 

  Narda PMM EP-601 10 kHz – 9.25 GHz Broadband Active Electric Field Probe

  SKU: 5271

  Application/Test Type: Monitoring Electric Field Strengths

  Field Strength Range: 0.5 to 500 V/m (0.01 V/m)

  Frequency Range: 10 kHz to 9.25 GHz

  Standards Met: IEC/EN 61000-4-3

  Interfaces: Fiber-Optic

  Battery Life: 60-80 hours

  Cost New:

  Was:

  Price Now:

  $905.00 - $9,000.00

  Inquire for Availability

  ORDERING OPTIONS

• 

  Rent Agilent (HP) E7401A EMC Analyzer, 9 kHz to 1.5 GHz

  SKU: 10260

  Applications: Conducted Emissions, Radiated Emissions, Spectrum Analyzers for EMC

  Pre-programmed Test Limits: FCC Part 15, CISPR 22, MIL-STD-461

  Max Frequency: 26.5 GHz

  Min Frequency: 9 kHz

  Sweep/Test Speed: Moderate

  Amplitude Accuracy: 0.37 dB

  Resolution Bandwidth: 1 Hz to 5 MHz

  Cost New:

  Was:

  Price Now:

  $995.00

• 

  Teseq CDN HSS-2 Surge CDN for High Speed Communication Lines

  SKU: 6195

  Application/Test Type: ISDN, 10/100BaseT, 1000BaseT etc., switchable per jumper, PoE applicable; 2 kV* (1.2/50 μs pulse as per IEC/EN 61000-4-5); Max. surge test current: 50 A (8/20 μs pulse as per IEC/EN 61000-4-5)

  Current Rating: 1 A (rated for Power over Ethernet)

  Insertion Loss: 9 dB at 100 MHz

  Mains & EUT Connections: RJ45 female; HV connector female (Fischer D103A023)

  Standards Met: IEC 61000-4-5 Ed. 3

  Voltage Rating: 100 VDC between pairs

  RENTAL ONLY

  VIEW PRODUCT

• 

  Teseq CDN 117 2-Wire Data Line Coupling Network

  SKU: 6542

  Weight: 2.1 kg (4.6 lbs)

  Application/Test Type: 1.2 / 50 μs pulse up to 6.6 kV

  Coupling: INA 170: spark gap device, 90 V trip voltage; INA 174A: capacitor 0.5 μF

  Current Rating: 1.5 Amps

  Decoupling chokes 1 kHz: 20 mH nominal

  Dimensions: 300 mm x 55 mm x 80 mm

  Ohmic resistance per path: Less than 2.5 Ω

  RF Connector: 4 mm safety banana; Fischer 103

  Series resistor: 2 x 40 Ω, 6 W

  Transmission 3 dB BW: 800 Hz

  Voltage Rating: 250 Volts AC/DC

  Cost New:

  Was:

  Price Now:

  $3,080.00

  In Stock

  ORDERING OPTIONS

• 

  SS100M Solid State RF Power Amplifier Series

  SKU: 9169

  Operating Frequency Range: 100 kHz to 100 MHz

  Power Output: up to 1,500 Watts

  Max RF Input Power: 0 dBm (1 mW) max

  Overdrive Protection: up to +10 dBm for no damage

  Impedance: 50 Ohms

  Applications: Radiated Immunity

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  3ctest CDN 405M40-5 Surge Coupler for Unshielded Unsymmetric Lines

  SKU: 30188

  Test Standards: EN/IEC 61000-4-5

  Applications: Data lines Unshielded, Unsymmetrical Surge Immunity

  Data Rate: 100 Kbit/s

  Surge Voltage Handling: 6kV

  Inquire for Availability

  VIEW PRODUCT Cart