EMC/EMI Test & Measurement Equipment - The EMC Shop

EMC Test Equipment Categories

Transient Generators

EMI Receivers/EMC Analyzers

RF Power Amplifiers

Electric Field Strength Measurement

RF Conducted Immunity Test Systems

EMC Antennas

Line Impedance Stabilization Networks (LISN's)

EMC Probes

EM Coupling Clamps

Coupling Decoupling Networks (CDN's)

RF Current Probes/Monitors

EMC/EMI Signal Generators

Calibration Equipment

Software for EMC Testing

EMC Test Equipment Test Equipment, Systems & Solutions

Haefely ONYX 16 ESD Simulator Gun for IEC 61000-4-2

SKU: 10536

1 review

Air Discharge Voltage Range: 1 to 16 kV or 1 to 30 kV

Battery: at least 16 hour battery life

Contact Discharge Voltage Range: 1 to 16 kV or 1 to 30 kV

Frequency Capabilities: single/0.1/0.2/0.5/1/2/5/10/20 Hz

Holding Time: More than 5 sec

Polarity: positive & negative

Pre-Programmed IEC Levels: Yes

Resolution: 100V steps

Standards Met: IEC/EN 61000-4-2, ISO 10605

Cost New:

Was:

Price Now:

$295.00 - $1,495.00

Ships Same Day

ORDERING OPTIONS
EFT-CAL-KIT Burst Generator Calibration Kit for IEC 61000-4-4

SKU: 10518

Weight: Appprox.140g

Connectors: Input: BNC or SHV, Output: BNC

Cross talk attenuation: 54dB, 60dB

Frequency Range: -3dB bandwidth: 400MHz

Impedance: EFT-AT50 input 50 Ω @ output 50 Ω | EFT-AT1000 input 1000Ω @ output 50Ω

Pulse voltage (open circuit): 8kV

Standards Met: IEC/EN 61000-4-4, ISO7637.2-p3

Voltage Rating: EFT-AT50: 500:1 | EFT-AT1000: 1000:1

Cost New:

Was:

Price Now:

$2,950.00 - $3,250.00

IN STOCK

ORDERING OPTIONS
EM Test ACS 503N30 AC Voltage Source for Harmonics & Flicker

SKU: 1312

Applications: Flicker and Harmonics Testing

Test Standards: IEC 61000-3-11, IEC 61000-3-12, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-7, IEC 60601-1-2 and more

Outpur Power: 30 kVA (300 Volts)

Output Current: inductive load: 41 A (43 A), resistive: 34 A (33 A), capacitive: 27 A (26 A) cont., 78 A 79 A) for 3 s, 300 A repetitive peak

Frequency Range: 10 to 80 Hz

Inquire for Availability

VIEW PRODUCT Cart
EMCO (ETS-Lindgren) 3810-2 LISN, NEMA, 9 kHz - 30 MHz, 10 Amps

SKU: 11287

Application/Test Type: Power line conducted emissions tests

Current Rating: 10 Amps

Dimensions: 8.7 x 15 x 6 inches / 22.2 x 38.1 x 15.2 cm

Frequency Range: 9 kHz to 30 MHz

Inductors: 50 µH/250µH

Mains & EUT Connections: NEMA typical. (SCHUKO and British available upon request)

RF Connector: 50Ω BNC Monitor

Standards Met: FCC Part 15, VDE 0871, VDE 0875

Voltage Rating: 250 VAC (Line to Ground)

Cost New:

Was:

Price Now:

$195.00 - $1,975.00

In Stock

ORDERING OPTIONS
Narda PMM EP-601 10 kHz – 9.25 GHz Broadband Active Electric Field Probe

SKU: 5271

Application/Test Type: Monitoring Electric Field Strengths

Field Strength Range: 0.5 to 500 V/m (0.01 V/m)

Frequency Range: 10 kHz to 9.25 GHz

Standards Met: IEC/EN 61000-4-3

Interfaces: Fiber-Optic

Battery Life: 60-80 hours

Cost New:

Was:

Price Now:

$905.00 - $9,000.00

Inquire for Availability

ORDERING OPTIONS
Rent Agilent (HP) E7401A EMC Analyzer, 9 kHz to 1.5 GHz

SKU: 10260

Applications: Conducted Emissions, Radiated Emissions, Spectrum Analyzers for EMC

Pre-programmed Test Limits: FCC Part 15, CISPR 22, MIL-STD-461

Max Frequency: 26.5 GHz

Min Frequency: 9 kHz

Sweep/Test Speed: Moderate

Amplitude Accuracy: 0.37 dB

Resolution Bandwidth: 1 Hz to 5 MHz

Cost New:

Was:

Price Now:

$995.00
Teseq CDN HSS-2 Surge CDN for High Speed Communication Lines

SKU: 6195

Application/Test Type: ISDN, 10/100BaseT, 1000BaseT etc., switchable per jumper, PoE applicable; 2 kV* (1.2/50 μs pulse as per IEC/EN 61000-4-5); Max. surge test current: 50 A (8/20 μs pulse as per IEC/EN 61000-4-5)

Current Rating: 1 A (rated for Power over Ethernet)

Insertion Loss: 9 dB at 100 MHz

Mains & EUT Connections: RJ45 female; HV connector female (Fischer D103A023)

Standards Met: IEC 61000-4-5 Ed. 3

Voltage Rating: 100 VDC between pairs

RENTAL ONLY

VIEW PRODUCT
Teseq CDN 117 2-Wire Data Line Coupling Network

SKU: 6542

Weight: 2.1 kg (4.6 lbs)

Application/Test Type: 1.2 / 50 μs pulse up to 6.6 kV

Coupling: INA 170: spark gap device, 90 V trip voltage; INA 174A: capacitor 0.5 μF

Current Rating: 1.5 Amps

Decoupling chokes 1 kHz: 20 mH nominal

Dimensions: 300 mm x 55 mm x 80 mm

Ohmic resistance per path: Less than 2.5 Ω

RF Connector: 4 mm safety banana; Fischer 103

Series resistor: 2 x 40 Ω, 6 W

Transmission 3 dB BW: 800 Hz

Voltage Rating: 250 Volts AC/DC

Cost New:

Was:

Price Now:

$3,080.00

In Stock

ORDERING OPTIONS
SS100M Solid State RF Power Amplifier Series

SKU: 9169

Operating Frequency Range: 100 kHz to 100 MHz

Power Output: up to 1,500 Watts

Max RF Input Power: 0 dBm (1 mW) max

Overdrive Protection: up to +10 dBm for no damage

Impedance: 50 Ohms

Applications: Radiated Immunity

Inquire for Availability

VIEW PRODUCT Cart
3ctest CDN 405M40-5 Surge Coupler for Unshielded Unsymmetric Lines

SKU: 30188

Test Standards: EN/IEC 61000-4-5

Applications: Data lines Unshielded, Unsymmetrical Surge Immunity

Data Rate: 100 Kbit/s

Surge Voltage Handling: 6kV

Inquire for Availability

VIEW PRODUCT Cart
AR FA7218 Electric Field Measuring Kit

SKU: 8209

Frequency Range: 2 MHz – 18 GHz

Field Strength Measurement Range: 14–1400V/m

Linearity: ±0.5dB

Amplitude Accuracy: ±1.0dB typ.

Test Standards: MIL-STD-461 RS103, DO-160 Section 20

Applications: Radiated Immunity

Typically In Stock

VIEW PRODUCT Cart
Langer EMV MFA 01 Micro Probe Set 1 MHz to 6 GHz

SKU: 30012

Frequency Range: 1 MHz to 6 GHz

Resolution: 200 µm

Applications: Conducted Emissions, Radiated Emissions

Test Standards: CISPR, MIL-STD-461, FCC

Cost New:

Was:

Price Now:

$195.00 - $2,819.00

Inquire for Availability

ORDERING OPTIONS