EMC Test Equipment

EMC Test Equipment Test Equipment, Systems & Solutions

• 

  AH Systems CPF-531 Calibration Fixture for RF Current Probes

  SKU: sku-206

  Weight: 10 Lb.'s

  Application/Test Type: Keep your broadband Current Probes, and Injection Current Probes calibrated

  Dimensions: 10" x 7" x 7"

  Frequency Range: 1 MHz - 1 GHz

  VIEW PRODUCT Cart

• 

  AH Systems CPF-630 Current Monitoring Probe Calibration Fixture

  SKU: 10205

  Weight: 9 Lb.'s

  Application/Test Type: Keep your broadband Current Probes, and Injection Current Probes calibrated

  Dimensions: 10" x 7" x 6"

  Frequency Range: 20 Hz - 500 MHz

  VIEW PRODUCT Cart

• 

  AH Systems SAS-572 High Gain, Low VSWR Horn Antenna, 18 - 26.5 GHz

  SKU: sku-193

  Weight: 0.2 lb.'s (0.09 kg)

  3dB Beamwidth (E-Field): 15°

  3dB Beamwidth (H-Field): 15°

  Antenna Factor (1 Meter): 36.7 to 37.1 dB/m

  Antennas: Double Ridge Guide Horn Antenna

  Application/Test Type: FCC, MIL-STD, VDE and TEMPEST immunity and emissions compliance testing

  Connector: WR-42 to SMA female

  Dimensions: 5.1" x 1.7" x 2.2" (13cm x 4.3cm x 5.6cm)

  Frequency Range: 700 MHz - 18 GHz

  Gain: 18.6 to 21.6 dBi

  Impedance: 50 Ohms

  Max Radiated Field Strength: 200 V/m

  Maximum Continuous Power: 50 Watts

  Mounting Base: ¼ - 20 Thread, female

  VSWR: 1.4:1 (2.0:1 max)

  VIEW PRODUCT Cart

• 

  AH Systems SAS-571 Broadband Double Ridge Horn Antenna

  SKU: 4192

  Weight: 3.5 lb.'s (1.59 kg)

  3dB Beamwidth (E-Field): 48°

  3dB Beamwidth (H-Field): 30°

  Antenna Factor (1 Meter): 22 to 44 dB/m

  Antennas: Double Ridge Guide Horn Antenna

  Aperture: 5.5" x 9.6" (13.9cm x 24.4cm)

  Application/Test Type: FCC, MIL-STD, VDE and TEMPEST Testing

  Connector: N-Type, female

  Dimensions: 11" x 5.6" x 9.6" (27.9cm x 14.2cm x 24.4cm)

  Frequency Range: 700 MHz - 18 GHz

  Gain: 1.4 to 15 dBi

  Impedance: 50 Ohms

  Max Radiated Field Strength: 200 V/m

  Maximum Continuous Power: 300 Watts

  Mounting Base: ¼ - 20 Thread, female

  VSWR: 1.6:1 (3.5:1 max)

  Cost New:

  Was:

  Price Now:

  $249.00 - $395.00

  Typically In Stock

  ORDERING OPTIONS

• 

  EM Test UCS 200N50 Automotive Transient Simulator

  SKU: 11183

  Applications: EMC Testing on EV Electric Vehicles Batteries & Charging Stations, Automotive Electrical Disturbances

  Standards Met: ISO 7637, DC 10614, SAE J1113,

  Max EUT DC Voltage (w/ Built In CDN): 80 Volts

  Max EUT DC Current (w/ Built In CDN): 50 Amps

  Peak Inrush Current Capability: 100 Amps

  Pre-Programmed Pulses: ISO 7637-2 (Pulse 1, 2a,3a/3b 6),SAE J1113, GM 3097, BMW, Volkswagen, PSA, Chrysler PF 9326, DC 10614, Renault, FIAT, Mitsubishi, Honda, Ford ES-XW7T

  Cost New:

  Was:

  Price Now:

  $975.00 - $5,495.00

  In Stock

  ORDERING OPTIONS

• 

  Haefely AXOS5 Surge/EFT/Burst Impulse Generator up to 5 kV

  SKU: 10180

  Applications: Conducted Immunity Testing, CE Marking, Medical Devices

  Standards Met: IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-11

  Max EUT AC Voltage (W/ Built In CDN): 264 Volts

  Max EUT AC Current (W/ Built In CDN): 16 Amps

  EFT/Burst Pulse Output Capability: 5.0 kV

  Combination/Wave Surge Output Capability: 5.0 kV

  Dips, Interrupts & Variations: Requires DIP 116

  Cost New:

  Was:

  Price Now:

  $975.00 - $1,795.00

  Typically In Stock

  ORDERING OPTIONS

• 

  Teseq CMAD 20B Common Mode Absorption Device, 1 MHz to 1 GHz, up to 20 mm Cable

  SKU: 10141

  Weight: approx. 3.4 kg

  Dimensions: (LxWxH): 670 mm x 78 mm x 58 mm

  Frequency Range: 1 MHz to 1 GHz

  Max. Cable Diameter: 20 mm

  Standards Met: IEC/EN 61000-4-20;CISPR 13;CISPR 14-1;CISPR 15;CISPR 16-1-4;CISPR 16-2-3;CISPR 22;CISPR 32;EN 61000-6-3;EN 61000-6-4;IEC 60533

  Cost New:

  Was:

  Price Now:

  $195.00 - $995.00

  In Stock

  ORDERING OPTIONS

• 

  Teseq CMAD 10 Common Mode Absorption Device for CISPR 22

  SKU: sku-140

  Weight: approx. 1.7 kg

  Application/Test Type: Disturbance mode testing ideal for GTEM test cells for radiated emission and immunity testing.

  Dimensions: (LxWxH): 293 mm x 63 mm x 40 mm

  Frequency Range: 30 MHz to 1000 MHz

  Standards Met: IEC/EN 61000-4-20

  VIEW PRODUCT Cart

• 

  Teseq CVP 2200A Capacitive Voltage Probe

  SKU: sku-139

  Frequency Range: 150 kHz to 30 MHz

  RF Connector: BNC 50 Ω, female

  VIEW PRODUCT Cart

• 

  Teseq PCJ 9201B Probe Calibration Jig

  SKU: 11132

  Weight: 4.5 Kgs (10 lbs)

  Dimensions: 26.0 cm x 18.1 cm x 15.0 cm (Max Probe Diameter: 11.5 cm; Min Probe Window Diameter: 1.6 cm; Max: 6.7 cm)

  Frequency Range: DC to 400 MHz

  Impedance: 50 Ohms

  RF Connector: N-type

  Standards Met: ISO 11452-4, RTCA/DO-160 section 20, MIL-STD-461 and IEC/EN 61000-4-6

  VSWR: up to 1 MHz ≤ 1.10:1; 10 MHz ≤ 1.14:1; 30 MHz ≤ 1.22:1; 100 MHz ≤ 1.50:1; 200 MHz ≤ 2.00:1; 300 MHz ≤ 2.75:1; 400 MHz ≤ 3.50:1

  VIEW PRODUCT Cart

• 

  Teseq VBA 6106A Biconical Antenna 30 MHz - 300 MHz

  SKU: sku-131

  Weight: approx. 1.3 kg

  Dimensions: (L x H x W in mm): approx. 1360 X 770 X 515

  Frequency Range: 30 MHz to 300 MHz

  Impedance: approx. 6 kg

  RF Connector: N type female

  VIEW PRODUCT Cart

• 

  Teseq DPA 4000A Compact Biconical Antenna 200 to 1000 MHz

  SKU: sku-127

  Weight: 690 g

  Dimensions: (L x W x H): 185 mm x 400 mm x 155 mm

  Frequency Range: 200 MHz to 1000 MHz

  Impedance: 50 Ω, nominal

  RF Connector: N female

  VIEW PRODUCT Cart