EMC Test Equipment

EMC Test Equipment Test Equipment, Systems & Solutions

• 

  EM Test CWS 500N2.2 BCI Test System

  SKU: sku-252

  Test Capabilities: RF Conducted Immunity

  Standards Met: MIL STD 461 CS 114, DO-160 CS Test

  Applications: Vehicle, Military and Aerospace, BCI Testing

  BCI Test Levels (w/ built-in amplifier): 400mA/114 dBµA

  Frequency Range (w/ built-in amplifier): 9 kHz - 400 MHz

  Typically In Stock

  VIEW PRODUCT Cart

• 

  PMM (Narda) LP-03 Log Periodic Antenna, 800 MHz - 6 GHz

  SKU: 10238

  Weight: 0.25 kgs (0.6 LB's)

  Antenna Factor (1 Meter): 23 / 42 dB typical

  Antennas: Log Periodic Antennas

  Application/Test Type: Radiated emissions and immunity

  Connector: Type-N(m) or Type-N(f)

  Dimensions: 18.7 cm x 32.5 cm x 8.1 cm

  Frequency Range: 800 MHz to 6 GHz

  Gain: 3.5 to 6.5 dBi typical

  Impedance: 50 Ω nominal

  Maximum Continuous Power: 75 Watts

  Mounting Base: Tripod adapter, supplied

  Standards Met: IEC 61000-4-6, MIL-STD-461F, DO-160

  VSWR: Less than 1.7:1 typical

  VIEW PRODUCT Cart

• 

  Teseq CDN S Series Coupling Network for Screened or Coaxial Cables

  SKU: 4255

  Application/Test Type: Coupling / decoupling network (CDN) for screened data/telcom lines or coaxial cables

  Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω

  Current Rating: 250 mA (CDN ST08 1 Amp)

  Decoupling of Common Mode Disturbance: 150 kHz: Over 60 dB; 1.5 MHz: Over 60 dB; 30 MHz: Over 50 dB; 230 MHz: Over 40 dB (refer to data sheet for some exceptions)

  Frequency Range: 10 kHz to 80 MHz or 150 kHz to 230 MHz

  Mains & EUT Connections: BNC 50 Ω, N 50 Ω, BNC 75 Ω, N 75 Ω, XLR 3 pins, DIN 5 pins, RJ45, D-Sub 9 pins, D-Sub 15 pins, D-Sub 25 pins, HDMI (refer to data sheet for exact model specifications)

  RF Connector: BNC 50 Ω

  RF Input Voltage: 20 Volts Max

  Standards Met: IEC 61000-4-6, CISPR 22, IEC 60601-1-2

  Voltage Division Factor: 9.5 dB to 10 dB ±1 dB (refer to data sheet for some exceptions)

  Voltage Rating: AC max. voltage (line to ground): 100 V - 250V; DC max. voltage (line to ground): 150 V - 400 V; Test voltage: 200 V - 750 V DC, 2 sec (refer to data sheet for exact model specifications)

  Cost New:

  Was:

  Price Now:

  $710.00 - $2,110.00

  ORDERING OPTIONS

• 

  Teseq CDN M416 4-Line Coupling/Decoupling Network

  SKU: sku-225

  Weight: 700 grams (1.5 LB.'s)

  Application/Test Type: 3 power lines, (L+N+PE), (2L+PE), (Optional L+L+L)

  Common Mode Impedance: 150 Ω +10/-20 Ω

  Current Rating: 10 Amps Maximum

  Decoupling of Common Mode Disturbance: Greater than 30 dB

  Dimensions: 4.1 x 3 x 5 inches (10.5 x 7.5 x 12.5 cm)

  Frequency Range: 150 kHz to 230 MHz (Optional 10 kHz - 80 MHz)

  Insertion Loss: Greater than 0.1 dB

  Mains & EUT Connections: 4 mm, safety (Optional IEC 320 16A)

  RF Connector: BNC, 50 Ω

  RF Input Voltage: Less than 30 V

  Standards Met: IEC 61000-4-6, CISPR 16-1-2, CISPR 16-2-1 and CISPR 15

  Voltage Division Factor: 20 dB ±1.5 dB

  Voltage Rating: AC max. voltage (line to ground) / (line to line): 250 V / 433 V (CDN M216-1000V: 500 V / 1000 V); DC max. voltage (line to ground) / (line to line): 400 V / 800 V (CDN M216-1000V: 1000 V / 2000 V); Test voltage: 3 kV DC, 2 sec

  VIEW PRODUCT

• 

  Teseq CDN M210B Coupling Network with CEE 7/17 EUT Port & IEC 60320 C14 AE Port

  SKU: sku-223

  Weight: 3.3 Lbs (1.5 kg)

  Application/Test Type: switchable 2 or 3 power lines, (L+N or L+N+PE)

  Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω

  Current Rating: 10 Amps

  Decoupling of Common Mode Disturbance: 150 kHz: Greater than 30 dB 1.5 MHz: Greater than 60 dB 30 MHz: Greater than 40 dB 230 MHz: Greater than 20 dB

  Dimensions: 3.9" x 3.9" x 9.5" (100 mm x 100 mm x 240 mm)

  Frequency Range: 150 kHz to 230 MHz

  Insertion Loss: Less than 0.1 dB

  Mains & EUT Connections: AE Euro: IEC 60320 C14 EUT-socket 2lines: CEE 7/17;

  RF Connector: BNC 50 Ω

  RF Input Voltage: 30 Volts Max

  Standards Met: IEC/EN 61000-4-6

  Voltage Division Factor: 150 kHz to 80 MHz: 9.5 dB ±1 dB 80 MHz to 230 MHz: 9.5 dB +3 dB / -2 dB

  Voltage Rating: AC max. voltage (line to ground): 250 V DC max. voltage (line to ground): 400 V; 3 kV DC, 2 sec

  Cost New:

  Was:

  Price Now:

  $1,020.00 - $1,445.00

  ORDERING OPTIONS

• 

  Teseq CDN 3083-Surge 620 Volt, 100-200 Amp Manual Coupler

  SKU: sku-220

  Weight: 80 kg (176 LB's)

  Application/Test Type: Manual Surge Testing for EUT up to 100Amps, 620 VAC; Three phase (5 wire); Two phase (4 wire); Single phase (3 wire)

  Current Rating: 100 Amp or 200 Amp continous depending on model

  Dimensions: 850 x 520 x 345 mm

  Mains & EUT Connections: Fischer 105 series; Screw terminals, rated for 230 A

  RF Input Voltage: Max. 8 kV / 4 kA

  Standards Met: IEC / EN 61000-4-5:2005, ANSI C62.45 standard, in IEC / EN 61000-4-12:2006 and ANSI C62.41

  Voltage Rating: 620 VAC RMS L-to-L (max. 440 V for NSG 3040 and Modula); 620 VAC RMS L-to-PE (max. 440 V for NSG 3040 and Modula); 620 VDC

  VIEW PRODUCT Cart

• 

  AH Systems CPF-532 Calibration Fixture for Injection & Monitoring Current Probes

  SKU: sku-207

  Weight: 13 Lb.'s

  Application/Test Type: Keep your broadband Current Probes, and Injection Current Probes calibrated

  Dimensions: 12" x 7" x 8"

  Frequency Range: 10 kHz - 400 MHz

  VIEW PRODUCT Cart

• 

  AH Systems CPF-531 Calibration Fixture for RF Current Probes

  SKU: sku-206

  Weight: 10 Lb.'s

  Application/Test Type: Keep your broadband Current Probes, and Injection Current Probes calibrated

  Dimensions: 10" x 7" x 7"

  Frequency Range: 1 MHz - 1 GHz

  VIEW PRODUCT Cart

• 

  AH Systems CPF-630 Current Monitoring Probe Calibration Fixture

  SKU: 10205

  Weight: 9 Lb.'s

  Application/Test Type: Keep your broadband Current Probes, and Injection Current Probes calibrated

  Dimensions: 10" x 7" x 6"

  Frequency Range: 20 Hz - 500 MHz

  VIEW PRODUCT Cart

• 

  AH Systems SAS-572 High Gain, Low VSWR Horn Antenna, 18 - 26.5 GHz

  SKU: sku-193

  Weight: 0.2 lb.'s (0.09 kg)

  3dB Beamwidth (E-Field): 15°

  3dB Beamwidth (H-Field): 15°

  Antenna Factor (1 Meter): 36.7 to 37.1 dB/m

  Antennas: Double Ridge Guide Horn Antenna

  Application/Test Type: FCC, MIL-STD, VDE and TEMPEST immunity and emissions compliance testing

  Connector: WR-42 to SMA female

  Dimensions: 5.1" x 1.7" x 2.2" (13cm x 4.3cm x 5.6cm)

  Frequency Range: 700 MHz - 18 GHz

  Gain: 18.6 to 21.6 dBi

  Impedance: 50 Ohms

  Max Radiated Field Strength: 200 V/m

  Maximum Continuous Power: 50 Watts

  Mounting Base: ¼ - 20 Thread, female

  VSWR: 1.4:1 (2.0:1 max)

  VIEW PRODUCT Cart

• 

  AH Systems SAS-571 Broadband Double Ridge Horn Antenna

  SKU: 4192

  Weight: 3.5 lb.'s (1.59 kg)

  3dB Beamwidth (E-Field): 48°

  3dB Beamwidth (H-Field): 30°

  Antenna Factor (1 Meter): 22 to 44 dB/m

  Antennas: Double Ridge Guide Horn Antenna

  Aperture: 5.5" x 9.6" (13.9cm x 24.4cm)

  Application/Test Type: FCC, MIL-STD, VDE and TEMPEST Testing

  Connector: N-Type, female

  Dimensions: 11" x 5.6" x 9.6" (27.9cm x 14.2cm x 24.4cm)

  Frequency Range: 700 MHz - 18 GHz

  Gain: 1.4 to 15 dBi

  Impedance: 50 Ohms

  Max Radiated Field Strength: 200 V/m

  Maximum Continuous Power: 300 Watts

  Mounting Base: ¼ - 20 Thread, female

  VSWR: 1.6:1 (3.5:1 max)

  Cost New:

  Was:

  Price Now:

  $249.00 - $395.00

  Typically In Stock

  ORDERING OPTIONS

• 

  EM Test UCS 200N50 Automotive Transient Simulator

  SKU: 11183

  Applications: EMC Testing on EV Electric Vehicles Batteries & Charging Stations, Automotive Electrical Disturbances

  Standards Met: ISO 7637, DC 10614, SAE J1113,

  Max EUT DC Voltage (w/ Built In CDN): 80 Volts

  Max EUT DC Current (w/ Built In CDN): 50 Amps

  Peak Inrush Current Capability: 100 Amps

  Pre-Programmed Pulses: ISO 7637-2 (Pulse 1, 2a,3a/3b 6),SAE J1113, GM 3097, BMW, Volkswagen, PSA, Chrysler PF 9326, DC 10614, Renault, FIAT, Mitsubishi, Honda, Ford ES-XW7T

  Cost New:

  Was:

  Price Now:

  $975.00 - $5,495.00

  In Stock

  ORDERING OPTIONS