EMC Test Equipment

EMC Test Equipment Test Equipment, Systems & Solutions

• 

  Amplifier Research (AR) ATR80M6G Wide Band, High Gain Log Periodic Antenna

  SKU: 2657

  Max RF Input Power: 5,000 Watts

  Antenna Factor (1 Meter): 14 to 67 db/m (±1.5 dB)

  Application/Test Type: Radiated Immunity Testing

  Dimensions: 132.1 x 20.32 x 97.8 cm (52 x 8.0 x 38.5 in)

  Frequency Range: 80 MHz - 6 GHz

  Max Radiated Field Strength: 1,000 V/m

  VSWR: 2.0:1 (Max: 3.0:1)

  Cost New:

  Was:

  Price Now:

  $1,275.00 - $14,950.00

  Typically In Stock

  ORDERING OPTIONS

• 

  Narda PMM EP-602 5 kHz - 9.25 GHz Broadband Active Electric Field Probe

  SKU: 5497

  Application/Test Type: Monitoring Electric Field Strengths

  Field Strength Range: 1.5 to 1500 V/m (0.01 V/m)

  Frequency Range: 5 kHz to 9.25 GHz

  Standard Met: IEC/EN 61000-4-3

  Interface: Fiber-Optic

  Battery Life: 60-80 hours

  Dynamic Range: 1,5 to 1500 V/m, 60 dB single range

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Com-Power CLA-150 32mm Absorbing Clamp CISPR 14

  SKU: 1551

  Test: CISPR 14

  Application/Test Type: Conducted Emissions, Radiated Emissions

  Clamp factor (CF): -3 dB to +4 dB

  Dimensions: 627 x 114 x 165 mm (24.7 x .4.5 x 6.5 inches)

  Frequency Range: 30 MHz to 1000 MHz

  Isolated lines under test: Power supply lines and other connecting lines

  Max. Cable Diameter: 32 mm (1.26 inches)

  Min. site attenuation: 14 dB to 21 dB

  RF Connector: BNC (f), 50 Ohms

  Inquire for Availability

  VIEW PRODUCT

• 

  Keysight (Agilent) N9038A-526 MXE EMI Receiver, 3 Hz to 26.5 GHz

  SKU: 10259

  Frequency Range: 20 Hz - 26.5 GHz

  Resolution: 2 Hz

  Bandwidth accuracy (–3.01 dB): 1 Hz to 1.3 MHz ± 2 % (nominal)

  Dynamic Range: > 70 dB

  Amplitude Accuracy: < ± 2.7 dB

  EMC Standards: CISPR 11, CISPR 22, ANSI C63.2

  Applications: Differences Between EMI Test Receivers and Spectrum Analyzers

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Keysight (Agilent/HP) 11947A 9 kHz - 200 MHz Transient Limiter w/ High Pass Filter

  SKU: 4602

  Applications: Conducted Emissions, Precompliance EMC Testing

  Frequency Range: 9 kHz to 200 MHz

  Insertion Loss: 10 dB

  Max. Input Level: Continuous: 2.5 W (+34 dBm), Pulse: 10 kW for 10 µS, DC:±12 V

  Typically in Stock

  VIEW PRODUCT

• 

  EM Test CWS 500N2.2 BCI Test System

  SKU: sku-252

  Test Capabilities: RF Conducted Immunity

  Standards Met: MIL STD 461 CS 114, DO-160 CS Test

  Applications: Vehicle, Military and Aerospace, BCI Testing

  BCI Test Levels (w/ built-in amplifier): 400mA/114 dBµA

  Frequency Range (w/ built-in amplifier): 9 kHz - 400 MHz

  Typically In Stock

  VIEW PRODUCT Cart

• 

  PMM (Narda) LP-03 Log Periodic Antenna, 800 MHz - 6 GHz

  SKU: 10238

  Weight: 0.25 kgs (0.6 LB's)

  Antenna Factor (1 Meter): 23 / 42 dB typical

  Antennas: Log Periodic Antennas

  Application/Test Type: Radiated emissions and immunity

  Connector: Type-N(m) or Type-N(f)

  Dimensions: 18.7 cm x 32.5 cm x 8.1 cm

  Frequency Range: 800 MHz to 6 GHz

  Gain: 3.5 to 6.5 dBi typical

  Impedance: 50 Ω nominal

  Maximum Continuous Power: 75 Watts

  Mounting Base: Tripod adapter, supplied

  Standards Met: IEC 61000-4-6, MIL-STD-461F, DO-160

  VSWR: Less than 1.7:1 typical

  VIEW PRODUCT Cart

• 

  Teseq CDN S Series Coupling Network for Screened or Coaxial Cables

  SKU: 4255

  Application/Test Type: Coupling / decoupling network (CDN) for screened data/telcom lines or coaxial cables

  Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω

  Current Rating: 250 mA (CDN ST08 1 Amp)

  Decoupling of Common Mode Disturbance: 150 kHz: Over 60 dB; 1.5 MHz: Over 60 dB; 30 MHz: Over 50 dB; 230 MHz: Over 40 dB (refer to data sheet for some exceptions)

  Frequency Range: 10 kHz to 80 MHz or 150 kHz to 230 MHz

  Mains & EUT Connections: BNC 50 Ω, N 50 Ω, BNC 75 Ω, N 75 Ω, XLR 3 pins, DIN 5 pins, RJ45, D-Sub 9 pins, D-Sub 15 pins, D-Sub 25 pins, HDMI (refer to data sheet for exact model specifications)

  RF Connector: BNC 50 Ω

  RF Input Voltage: 20 Volts Max

  Standards Met: IEC 61000-4-6, CISPR 22, IEC 60601-1-2

  Voltage Division Factor: 9.5 dB to 10 dB ±1 dB (refer to data sheet for some exceptions)

  Voltage Rating: AC max. voltage (line to ground): 100 V - 250V; DC max. voltage (line to ground): 150 V - 400 V; Test voltage: 200 V - 750 V DC, 2 sec (refer to data sheet for exact model specifications)

  Cost New:

  Was:

  Price Now:

  $710.00 - $2,110.00

  ORDERING OPTIONS

• 

  Teseq CDN M416 4-Line Coupling/Decoupling Network

  SKU: sku-225

  Weight: 700 grams (1.5 LB.'s)

  Application/Test Type: 3 power lines, (L+N+PE), (2L+PE), (Optional L+L+L)

  Common Mode Impedance: 150 Ω +10/-20 Ω

  Current Rating: 10 Amps Maximum

  Decoupling of Common Mode Disturbance: Greater than 30 dB

  Dimensions: 4.1 x 3 x 5 inches (10.5 x 7.5 x 12.5 cm)

  Frequency Range: 150 kHz to 230 MHz (Optional 10 kHz - 80 MHz)

  Insertion Loss: Greater than 0.1 dB

  Mains & EUT Connections: 4 mm, safety (Optional IEC 320 16A)

  RF Connector: BNC, 50 Ω

  RF Input Voltage: Less than 30 V

  Standards Met: IEC 61000-4-6, CISPR 16-1-2, CISPR 16-2-1 and CISPR 15

  Voltage Division Factor: 20 dB ±1.5 dB

  Voltage Rating: AC max. voltage (line to ground) / (line to line): 250 V / 433 V (CDN M216-1000V: 500 V / 1000 V); DC max. voltage (line to ground) / (line to line): 400 V / 800 V (CDN M216-1000V: 1000 V / 2000 V); Test voltage: 3 kV DC, 2 sec

  VIEW PRODUCT

• 

  Teseq CDN M210B Coupling Network with CEE 7/17 EUT Port & IEC 60320 C14 AE Port

  SKU: sku-223

  Weight: 3.3 Lbs (1.5 kg)

  Application/Test Type: switchable 2 or 3 power lines, (L+N or L+N+PE)

  Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω

  Current Rating: 10 Amps

  Decoupling of Common Mode Disturbance: 150 kHz: Greater than 30 dB 1.5 MHz: Greater than 60 dB 30 MHz: Greater than 40 dB 230 MHz: Greater than 20 dB

  Dimensions: 3.9" x 3.9" x 9.5" (100 mm x 100 mm x 240 mm)

  Frequency Range: 150 kHz to 230 MHz

  Insertion Loss: Less than 0.1 dB

  Mains & EUT Connections: AE Euro: IEC 60320 C14 EUT-socket 2lines: CEE 7/17;

  RF Connector: BNC 50 Ω

  RF Input Voltage: 30 Volts Max

  Standards Met: IEC/EN 61000-4-6

  Voltage Division Factor: 150 kHz to 80 MHz: 9.5 dB ±1 dB 80 MHz to 230 MHz: 9.5 dB +3 dB / -2 dB

  Voltage Rating: AC max. voltage (line to ground): 250 V DC max. voltage (line to ground): 400 V; 3 kV DC, 2 sec

  Cost New:

  Was:

  Price Now:

  $1,020.00 - $1,445.00

  ORDERING OPTIONS

• 

  Teseq CDN 3083-Surge 620 Volt, 100-200 Amp Manual Coupler

  SKU: sku-220

  Weight: 80 kg (176 LB's)

  Application/Test Type: Manual Surge Testing for EUT up to 100Amps, 620 VAC; Three phase (5 wire); Two phase (4 wire); Single phase (3 wire)

  Current Rating: 100 Amp or 200 Amp continous depending on model

  Dimensions: 850 x 520 x 345 mm

  Mains & EUT Connections: Fischer 105 series; Screw terminals, rated for 230 A

  RF Input Voltage: Max. 8 kV / 4 kA

  Standards Met: IEC / EN 61000-4-5:2005, ANSI C62.45 standard, in IEC / EN 61000-4-12:2006 and ANSI C62.41

  Voltage Rating: 620 VAC RMS L-to-L (max. 440 V for NSG 3040 and Modula); 620 VAC RMS L-to-PE (max. 440 V for NSG 3040 and Modula); 620 VDC

  VIEW PRODUCT Cart

• 

  AH Systems CPF-532 Calibration Fixture for Injection & Monitoring Current Probes

  SKU: sku-207

  Weight: 13 Lb.'s

  Application/Test Type: Keep your broadband Current Probes, and Injection Current Probes calibrated

  Dimensions: 12" x 7" x 8"

  Frequency Range: 10 kHz - 400 MHz

  VIEW PRODUCT Cart