EMC Test Equipment

EMC Test Equipment Test Equipment, Systems & Solutions

• 

  3ctest PFS 2216SD Power Fail Simulator for EN/IEC 61000-4-11

  SKU: sku-590

  Test Standards: IEC/EN 61000-4-11, IEC/EN 61000-4-29

  Mains & EUT Connections: 4mm banana line

  Output Current: 16A AC/DC continuous current; 20A continuous 5s 40Acontinuous 3s

  Peak inrush current capability: 500 Amps

  Applications: EMC Precompliance Testing, Conducted Immunity

  Rise time: 1-5us（100Ω load）

  Test duration: 50ms-50000ms

  Test Voltage: 250V AC，300V DC

  Trigger: BNC,5V TTL

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  3ctest PFS 6030A Power Failure Simulator for Voltage Dips & Drops，60 V / 30 A

  SKU: sku-588

  Test voltage: Voltage drop: 1V max@30A

  Weight: 20 kg

  Dimensions: 19" / 4 U

  Output: DUT voltage monitoring output: BNC，10:1 coaxial terminal output DUT current monitoring output: BNC，10A:1V coaxial terminal output

  Peak current: 60A duration time 500 ms

  Pulse duration: Drop duration time td 1us - 10 s

  Repetition rate: 100 ms - 999s

  Source Impedance: High resistance or low resistance

  Test Voltage: 0–60 V

  Trigger: External trigger signal by oscilloscope, BNC,5V TTL

  Trigger of bursts: Automatic, manual, external

  VIEW PRODUCT Cart

• 

  3ctest EFT 500T Burst/EFT Simulator w/ Three Phase CDN

  SKU: 4559

  Applications: Conducted Immunity Testing, EMC on Medical Devices, CE Marking

  Standards Met: IEC 61000-4-4,IEC 61326,EN 61000-6-1,IEC 61850-3,EN 61000-6-2

  Built-in three phase CDN: AC 380V/16A; DC-1 220V/16A

  Output Voltage Range: 0.25 to 4.8kV

  Condition of Used (Scale 5 - 10): 8

  Pre Programmed Test Routines: Yes

  Cost New:

  Was:

  Price Now:

  $1,395.00 - $17,250.00

  In Stock

  ORDERING OPTIONS

• 

  Com-Power ISN Calibration Kit for ISN and LCL Adapters

  SKU: sku-580

  VIEW PRODUCT Cart

• 

  AH Systems SAS-545 1 GHz Biconical Antenna

  SKU: sku-573

  Weight: 1.6 lb.'s (725 g)

  Antennas: Biconical Antennas

  Application/Test Type: Radiated emissions and immunity

  Connector: N-type (female)

  Dimensions: Height: 15 in. (38.1 cm) Width: 14 1/4 in. (36.25 cm) Depth: 7 11/16 in. (19.5 cm)

  Frequency Range: 30 MHz - 1GHz

  Gain: -50 to 2.5 dBi

  Impedance: 50 Ohms nominal

  Maximum Continuous Power: 200 Watt

  Mounting Base: ABC-B Mounting Clamp with ¼ - 20 Thread, female

  VIEW PRODUCT

• 

  Teseq AMZ 41A Absorbing Clamp for CISPR 13 & 14, w/ LE 210 RF Cable

  SKU: 30080

  Weight: approx. 7 kg

  Application/Test Type: Disturbance power measurements of coaxial cables, automotive screened components (eg motor ignition systems and sheath current on aerial cables.

  Clamp factor (CF): -4 dB to +5 dB

  Current Rating: 25 Amps Max

  Decoupling factor DF: Greater than 21 dB

  Decoupling factor DR: Greater than 30 dB

  Dimensions: W x D x H: 665 mm x 120 mm x 105 mm

  Frequency Range: 30 MHz to 1000 MHz

  Isolated lines under test: Power supply lines and other connecting lines

  Max. Cable Diameter: 20 mm inner (10 mm with adapter)

  Maximum Continuous Power: 10 Watts

  Min. site attenuation: 13 dB to 22 dB

  RF Connector: BNC, 50 Ω

  Standards Met: CISPR 13, CISPR 14-1, CISPR 16-1-5, CISPR 16-2-2

  Inquire for Lead Time

  VIEW PRODUCT Cart

• 

  3ctest D1550 Stripline for ISO 11452-5 Road Vehicles, 50Ω

  SKU: sku-562

  Connector type: N 50 Ω

  Dimensions: 4.30 x 1.5x 1.05 m, .95 m table height

  Distance between the plates: 150 mm

  Frequency range: 0 GHz - 1 GHz

  Max. input power: 1000 W

  Standards Met: ISO 11452-5

  Stripline: Conform with ISO 11452-5

  Typical impedance: 50 Ω

  Typical VSWR (30 - 1000 MHz): Better than 1.22

  VIEW PRODUCT Cart

• 

  Teseq MDS 21B EMC Absorbing Clamp for Disturbance Power Measuring, w/ 6 dB Attenuator & RF Cable

  SKU: sku-559

  Weight: approx. 6.3 kg

  Current Rating: 30 A

  Dimensions: 610 mm x 115 mm x 80 mm

  Frequency Range: 30 MHz to 1000 MHz

  Impedance: 50 Ω

  RF Connector: N, female

  VIEW PRODUCT Cart

• 

  EM Test PFS 503N32 Power Fail Simulator, 3-phase 3x480V AC (p-p) max. 32A

  SKU: sku-549

  Weight: app. 28kg;

  Current Rating: Max. 32A

  Dimensions: 19"/6 HU

  Dips, Interrupts & Variations: Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29

  Frequency: 50Hz/60Hz, Single phase application

  Output: 3-phase application L1, L2, L3, N and PE on the rear panel. 1-phase application L, N and PE on the front panel

  Peak current: Better than 500A

  Repetition rate: 0.01s to 9,999s

  Rise time: Between 1us and 5us for abrupt changes, generator loaded with resistive load

  Supply Voltage: 115V/230V; +10/-15%

  Test Voltage: 3x480V AC resp. 3x690V AC (L-L) 277V AC resp. 400V AC 360V DC resp. 600V DC (L-N)

  Trigger of bursts: Automatic

  VIEW PRODUCT Cart

• 

  Haefely PIM 110 Ring Wave Generator

  SKU: 10544

  Impedance: 12, 30 & 200 Ohms

  Applications: Surge Immunity Testing

  Ring Wave: 0.5us - 100kHz (voltage & current)

  Pulse repetition: 12 per minute

  Pulse Voltage: 0.20 – 7.8kV

  Compliance Standards: IEC/EN 61000-4-12 and ANSI (IEEE) C62.41

  Test duration: 5 seconds

  Test Equipment Group: Ring Wave Generators/Simulators

  Cost New:

  Was:

  Price Now:

  $995.00 - $1,795.00

  In Stock

  ORDERING OPTIONS

• 

  Amplifier Research 40AD1 DC - 1MHz RF Power Amplifier

  SKU: 4272

  Output Power: ~50 Watts

  Frequency Range: DC - 1 MHz

  Applications: Radiated Immunity

  Max. Gain: 45 dB minimum

  Input for Rated Output: 1.0 milliwatt maximum

  Input Impedance: 50Ω; VSWR 1.5:1 maximum

  Output Impedance: 50Ω; VSWR 2.0:1 maximum

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Haefely PIM 150 Oscillating Wave Surge Generator

  SKU: 10526

  Burst frequency: 100 kHz & 1 MHz

  Coupling: Single & Multiple Path

  Mains & EUT Connections: HV connector & CDN

  Source Impedance: 200 ohms

  Standards Met: IEC 61000-4-18 Power & Data lines; ANSI C37.90.1, IEC 60255-22-1, IEEE 1613

  In Stock

  VIEW PRODUCT Cart