EMC Test Equipment

EMC Test Equipment Test Equipment, Systems & Solutions

• 

  CE Mark Product Package for IEC/EN 61000-4 Series Compliance

  SKU: 12854

  Applications: CE Marking, EMC Precompliance Testing, Conducted Immunity

  Harmonized Standards: IEC/EN 61000-4-4, IEC 61000-4-5, IEC 61000-4-11

  Industries: Medical Devices

  Test Setup: Conducted Immunity/Susceptibility Test Setup

  Peak inrush current capability: greater than 500 Amps

  Pre-Programmed IEC Levels: Yes

  IN STOCK

  VIEW PRODUCT Cart

• 

  AH Systems FCC-4 High Frequency Tuned Dipole Antenna, 325 MHz to 1000 MHz, CISPR 16-1-5, 60 Watts

  SKU: sku-746

  Weight: 0.4 lbs

  Antennas: Dipole Antennas

  Application/Test Type: site attenuation measurements

  Connector: N-type (female)

  Dimensions: Length 9 in.

  Frequency Range: 325 MHz - 1000 MHz

  Gain: 0 to 2 dBi

  Impedance: 50 Ohms nominal

  Maximum Continuous Power: 60 Watts

  Mounting Base: One balun mounting clamp with 1/4-20 threads

  VIEW PRODUCT Cart

• 

  AH Systems FCC-3 Tuned Dipole Antenna, 170 MHz to 340 MHz, 90 Watts

  SKU: sku-745

  Weight: 0.5 lbs

  Antennas: Dipole Antennas

  Application/Test Type: site attenuation measurements

  Connector: N-type (female)

  Dimensions: Length 12.5 in.

  Frequency Range: 170 MHz - 340 MHz

  Gain: 1 to 2 dBi

  Impedance: 50 Ohms nominal

  Maximum Continuous Power: 90 Watts

  Mounting Base: One balun mounting clamp with 1/4-20 threads

  VIEW PRODUCT Cart

• 

  AH Systems FCC-2 Half-wave Dipole Antenna, 65 MHz to 180 MHz, 200 Watts

  SKU: sku-744

  Weight: 0.7 lbs

  Antennas: Dipole Antennas

  Application/Test Type: site attenuation measurements

  Connector: N-type (female)

  Dimensions: Length 21.7 in.

  Frequency Range: 65 MHz - 180 MHz

  Gain: 0 to 2 dBi

  Impedance: 50 Ohms nominal

  Maximum Continuous Power: 200 Watts

  Mounting Base: One balun mounting clamp with 1/4-20 threads

  VIEW PRODUCT Cart

• 

  AH Systems FCC-1 Tuned Dipole Antenna, 25 MHz – 70 MHz, 300 Watts

  SKU: sku-743

  Weight: 1.2 lbs

  Antennas: Dipole Antennas

  Application/Test Type: site attenuation measurements

  Connector: N-type (female)

  Dimensions: Length 23.7 in.

  Frequency Range: 25 MHz to 70 MHz

  Gain: -5 to 2 dBi

  Impedance: 50 Ohms nominal

  Maximum Continuous Power: 300 Watts

  Mounting Base: One balun mounting clamp with 1/4-20 threads

  VIEW PRODUCT Cart

• 

  A.R. 3500A100 High Power RF Amplifier

  SKU: sku-741

  Weight: 900 lbs.

  Dimensions: 22.1 x 60.0 x 39.4 in

  Flatness: ± 1.5 dB maximum ± 0.5 dB with internal leveling

  Frequency Range: 10 kHz - 100 MHz instantaneously

  Gain: 66 dB minimum

  Impedance: 50 ohms

  Input: 180-267 VAC Delta (4 wire) 360-435 VAC, Wye (5 wire) (user must specify) 47-63Hz, 3 phase 15,000 watts maximum at .99 P.F. typical

  Output: POWER OUTPUT @ 3 dB COMPRESSION Typical.... 3000 watts Minimum .. 2700 watts POWER OUTPUT @ 1 dB COMPRESSION Typical...... 2500 watts Minimum ... 2000 watts

  RF Connector: Type N female

  RF Input Voltage: 1.0 milliwatt maximum for rated output

  Inquire for Lead time

  VIEW PRODUCT Cart

• 

  Amplifier Research 100S1G4M1 Solid-state Amplifier, 100 Watts CW, 0.8-4.2 GHz

  SKU: sku-739

  Weight: 190 lbs.

  Dimensions: 19.8 x 18.5 x 24.0in

  Flatness: FLATNESS............... ±1.5 dB typical ........................ ±2.0 dB maximum .......... ± 1dB with Internal Leveling

  Frequency Range: 0.8 – 4.2 GHz

  Gain: GAIN (at maximum setting)... 50 dB minimum GAIN ADJUSTMENT ........ (Continuous Range) .....15 dB minimum . (4096 steps remote)

  Impedance: 50 ohms

  Input: 99-260 VAC

  Output: POWER OUTPUT @ 3dB COMPRESSSION Nominal....... 120 watts Minimum ........... 90 watts POWER OUTPUT @ 1dB COMPRESSION Nominal............. 100 watts Minimum ...... 70 watts

  RF Connector: Type N female

  RF Input Voltage: 1.0 milliwatt maximum for rated output

  VIEW PRODUCT Cart

• 

  Fischer Custom Communications FCC-801-M3-16A, 3 Line M Series CDN, 150 kHz – 230MHz, 16 Amp

  SKU: sku-731

  Application/Test Type: 3 Power Conductors

  Common Mode Impedance: Frequency dependent 150 kHz – 26MHz: 150Ω ±20Ω 26MHz – 80MHz: 150Ω +60Ω -45Ω 80MHz –230MHz: 150Ω +60Ω -60Ω

  Current Rating: 16 Amps

  Frequency Range: 150 kHz to 230 MHz

  Mains & EUT Connections: Multi-Contact Safety Socket

  RF Connector: 50 Ω BNC (Female)

  RF Input Voltage: 30 Volts

  Standards Met: IEC / EN 61000-4-6

  Voltage Division Factor: 10dB+1dB/-3dB

  Voltage Rating: DC less than 600V, AC less than 250V

  VIEW PRODUCT Cart

• 

  Fischer Custom Communications F-203I-A-23MM, 10kHz - 1GHz, 100 Watts CW

  SKU: sku-726

  Weight: approx. 7 kg

  Application/Test Type: Injects the disturbance signal through a combination of inductive and capacitive coupling

  Connector: N-type female

  Dimensions: 610 x 75 x 135 mm

  Frequency Range: 10kHz - 1GHz

  Max. Cable Diameter: 23 mm

  Maximum Continuous Power: 100 watts CW for 15 minutes

  Standards Met: IEC/EN 61000-4-6;

  VIEW PRODUCT Cart

• 

  Fischer Custom Communications F-33-1 Current Probe

  SKU: 0724

  Top Frequency Range: 250 MHz

  Bottom Frequency Range: 10 kHz

  AC Current Handling (DC-400Hz): 100 Amps

  RF Current Handling (CW/Pulse): 10/50 Amps

  Style: Clamp On (Fixed Window)

  Diameter: 1.25"

  Transfer Impedance: 5 Ohms

  Test Standards: IEC 61000-4-6

  Cost New:

  Was:

  Price Now:

  $195.00 - $3,375.00

  Typically In Stock

  ORDERING OPTIONS

• 

  Amplifier Research 40T18G26A TWTA Microwave Amplifier

  SKU: 10716

  Flatness: ± 8 dB maximum

  Frequency Range: 18 GHz – 26.5 GHz

  Gain: 46 dB

  Output: 40 watts

  RF Connector: Type k female

  RF Input Voltage: 1.0 milliwatt maximum for rated output

  Applications: Radiated Immunity Testing

  Test Standards: RTCA DO-160, MIL-STD-461 RS 103

  RENTAL ONLY

  VIEW PRODUCT Cart

• 

  Amplifier Research 50U1000, 50 Watts CW, Class A Solid State RF Power Amplifier

  SKU: 11715

  Output Power: 50 Watts P1dB (70 Watts typ.)

  Applications: Radiated immunity Testing

  Flatness: ± 1.5 dB

  Frequency Range: 10 kHz - 1 GHz

  Gain: 47 dB minimum (20dB adjustable)

  Impedance: 50 ohms

  RF Connector: Type N female

  RF Input Voltage: 1.0 milliwatt maximum for rated output

  Test Standards: IEC 61000-4-3, IEC 61000-4-6, ISO 11452-4, DO-160 Section 20

  Inquire for Availability

  VIEW PRODUCT Cart