EMC Test Equipment

(Showing 12 of 1198)
Show 12 24 36 48 96

EMC Test Equipment Categories

Transient Generators
Transient Generators
EMI Receivers/EMC Analyzers
EMI Receivers/EMC Analyzers
RF Power Amplifiers
RF Power Amplifiers
Electric Field Strength Measurement
Electric Field Strength Measurement
RF Conducted Immunity Test Systems
RF Conducted Immunity Test Systems
EMC Antennas
EMC Antennas
Line Impedance Stabilization Networks (LISN's)
Line Impedance Stabilization Networks (LISN's)
EMC Probes
EMC Probes
EM Coupling Clamps
EM Coupling Clamps
Coupling Decoupling Networks (CDN's)
Coupling Decoupling Networks (CDN's)
RF Current Probes/Monitors
RF Current Probes/Monitors
EMC/EMI Signal Generators
EMC/EMI Signal Generators
Calibration Equipment
Calibration Equipment
Software for EMC Testing
Software for EMC Testing

EMC Test Equipment Test Equipment, Systems & Solutions

  • E&I / ENI 2100L RF Power Amplifier 10 kHz - 12 MHz, 100 Watts

    E&I / ENI 2100L RF Power Amplifier 10 kHz - 12 MHz, 100 Watts

    SKU: sku-844

    Connectors: BNC
    Cooling: Forced Air
    Flatness: ± 1.5 dB
    Frequency range: 10 kHz - 12 MHz
    Gain: 50 dB nominal
    Gain Flatness: +/- 1.5 dB
    Input: 104-240 Volts
    Input Power for Rated Pout: 0 dBm (1 mW)
    Output: 100 Watts P1dB
    Protection: Unit will withstand input signal of +13 dBm without damage (1.0 V rms) max.
    Rated Power: 100 Watts P1dB Compression
    RF Input Signal: AM, FM, SSB, Pulsed
    RF Input Voltage: 1 mW
    $795.00 - $10,950.00
    In Stock
    ORDERING OPTIONS
  • Teseq CDN S900S RS-232 Coupling Decoupling Network for IEC 61000-4-6

    Teseq CDN S900S RS-232 Coupling Decoupling Network for IEC 61000-4-6

    SKU: 10828

    Weight: 1.5 kg (3.3 lbs)
    Application/Test Type: Coupling / decoupling network (CDN) for screened data/telcom lines or coaxial cables
    Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω
    Current Rating: 250 mA (CDN ST08 1 Amp)
    Decoupling of Common Mode Disturbance: 150 kHz: Over 60 dB; 1.5 MHz: Over 60 dB; 30 MHz: Over 50 dB; 230 MHz: Over 40 dB (refer to data sheet for some exceptions)
    Dimensions: 4 x 4 x 9.5 inches (10 cm x 10 cm x 24 cm); (CDN HDMI and CDN S752A: 28.8 cm 11 inches)
    Frequency Range: 10 kHz to 80 MHz or 150 kHz to 230 MHz
    Mains & EUT Connections: BNC 50 Ω, N 50 Ω, BNC 75 Ω, N 75 Ω, XLR 3 pins, DIN 5 pins, RJ45, D-Sub 9 pins, D-Sub 15 pins, D-Sub 25 pins, HDMI (refer to data sheet for exact model specifications)
    RF Connector: BNC 50 Ω
    RF Input Voltage: 20 Volts Max
    Standards Met: IEC 61000-4-6, CISPR 22, IEC 60601-1-2
    Voltage Division Factor: 9.5 dB to 10 dB ±1 dB (refer to data sheet for some exceptions)
    Voltage Rating: AC max. voltage (line to ground): 100 V - 250V; DC max. voltage (line to ground): 150 V - 400 V; Test voltage: 200 V - 750 V DC, 2 sec (refer to data sheet for exact model specifications)
    $1,190.00
  • Teseq CDN M016 Switchable 16 Amp Coupling/Decoupling Network

    Teseq CDN M016 Switchable 16 Amp Coupling/Decoupling Network

    SKU: 10827

    Associated Equipment: RF Conducted Immunity Test Systems
    Application/Test Type: switchable 2 or 3 power lines, (L+N or L+N+PE)
    Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω
    Current Rating: 16 Amps
    Decoupling of Common Mode Disturbance: 150 kHz: Greater than 30 dB 1.5 MHz: Greater than 60 dB 30 MHz: Greater than 40 dB 230 MHz: Greater than 20 dB
    Dimensions: 3.9" x 3.9" x 9.5" (100 mm x 100 mm x 240 mm)
    Frequency Range: 150 kHz to 230 MHz
    Insertion Loss: Less than 0.1 dB
    Mains & EUT Connections: 4 mm banana
    RF Connector: BNC 50 Ω
    RF Input Voltage: 30 Volts (Max)
    Standards Met: IEC/EN 61000-4-6
    Voltage Division Factor: 150 kHz to 80 MHz: 9.5 dB ±1 dB 80 MHz to 230 MHz: 9.5 dB +3 dB / -2 dB
    Voltage Rating: AC max. voltage (line to ground): 250 V DC max. voltage (line to ground): 400 V; 3 kV DC, 2 sec
    $195.00 - $495.00
    Typically In Stock
    ORDERING OPTIONS
  • Teseq NSG 4070C-80 Integrated Signal Generator, 4 kHz to 1 GHz, 80 W Integrated Class A Power Amplifier

    Teseq NSG 4070C-80 Integrated Signal Generator, 4 kHz to 1 GHz, 80 W Integrated Class A Power Amplifier

    SKU: sku-809

    Test Capabilities: RF Conducted Immunity
    Standards Met: IEC/EN 61000-4-6
    Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & IT
    CDN Test Levels (w/ built-in amplifier): 40Vrms
    BCI Test Levels (w/ built-in amplifier): 8Vrms
    Frequency Range (w/ built-in amplifier): 150 kHz - 230 MHz
    Typically In Stock
    VIEW PRODUCT Cart
  • Noiseken LSS-15AX Series Lightning Surge Simulator up to 15kV

    Noiseken LSS-15AX Series Lightning Surge Simulator up to 15kV

    SKU: sku-800

    Weight: 200 kg.
    Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5
    Coupling: AC/DC lines CDN, and Telecom lines CDN
    Dimensions: 555 X 1250 X 790 mm
    Impedance: 2 Ohm
    Mains & EUT Connections: 4mm banana plug
    Phase synchronization: 0°-360°, 1°step or random
    Polarity: Positive, Negative, Alternate
    Pulse current (short circuit): 15kV/7500A
    Pulse repetition: 20 sec
    Pulse voltage (open circuit): 15kV/7500A
    Standards Met: IEC 61000-4-5
    Inquire for Availability
    VIEW PRODUCT Cart
  • Schloder VIS 1700 Voltage Interruption Simulator

    Schloder VIS 1700 Voltage Interruption Simulator

    SKU: sku-784

    Communication: BNC outputs (on rear) for voltage, current and scope triggering
    Coupling: BNC
    Dips, Interrupts & Variations: Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29
    General Data: Technical Details
    Mains & EUT Connections: 4mm banana line
    Output Current: AC max. 280 V, DC max. 3 6 0 V
    Peak inrush current capability: 16 Amps
    Phase synchronization: at any phase position 0° - 360 °
    Test duration: 0.1sec - 9990sec, furthermore single event and continuous operation
    Test Voltage: AC max. 280 V ,DC max. 3 6 0 V
    Typically In Stock
    VIEW PRODUCT Cart
  • Rent EM Test TSS 500M2F Telecom Surge Simulator for FCC Part 68

    Rent EM Test TSS 500M2F Telecom Surge Simulator for FCC Part 68

    SKU: sku-776

    Weight: approx. 35kg
    Application/Test Type: Test levels as per FCC part 68
    Coupling: Telecom ports: Tip to Ground, Ring to Ground, Tip and Ring to Ground Power ports 250V/16A: L toN, L to PE, N to PE , L+N to PE
    Dimensions: 19“ / 6HU,
    Output Current: 64A – 1,000A (power line) 20 – 200A per wire (surge A)
    Outputs: 4 mm banana socket
    Polarity: pos / neg / alternate
    Rise time: Less than 2 us
    Telecom Surge: As per FCC part 68, Pulse B, IEC 61000-4-5, ITU and ETSI recommendations
    Test Voltage: 160V – 2,500V ± 10% (power line) 160V – 1,500V ± 10% (surge A)
    Trigger of bursts: Automatic pulse release
    VIEW PRODUCT Cart
  • A.R. 500A100A Solid State RF Amplifier, 500 Watts CW, 10 kHz - 100 MHz

    A.R. 500A100A Solid State RF Amplifier, 500 Watts CW, 10 kHz - 100 MHz

    SKU: sku-775

    Weight: 150 lbs
    Dimensions: 19.8 x 16.8 x 21.7 in
    Flatness: .± 1.5 dB maximum ± 0.5 dB with internal leveling
    Frequency Range: 10 kHz - 100 MHz
    Gain: GAIN (at maximum setting).........57 dB minimum GAIN ADJUSTMENT (continuous range)....25 dB minimum
    Impedance: 50 ohms
    Input: 180 - 264 VAC 47 - 440 Hz, 2000 watts maximum @ 0.99 P.F. typical
    Output: POWER OUTPUT, CW Nominal .... 617 watts Minimum...... 500 watts Linear @ 1 dB compression .. 300 watts minimum
    RF Connector: Type N female
    RF Input Voltage: 1.0 milliwatt maximum for rated output
    Inquire for Availability
    VIEW PRODUCT Cart