EMC Test Equipment

EMC Test Equipment Test Equipment, Systems & Solutions

• 

  Used Empower 800 MHz - 4.2 GHz, 13 Watt High Power RF Amplifier

  SKU: sku-843

  Weight: 30 LBs

  Dimensions: 19 x 3.5 x 18 in.

  Frequency Range: 800 - 4200 MHz

  Gain: 42 dB min

  Impedance: 50 ohms nominal

  RF Connector: Type N female

  VIEW PRODUCT Cart

• 

  Teseq CDN S900S RS-232 Coupling Decoupling Network for IEC 61000-4-6

  SKU: 10828

  Weight: 1.5 kg (3.3 lbs)

  Application/Test Type: Coupling / decoupling network (CDN) for screened data/telcom lines or coaxial cables

  Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω

  Current Rating: 250 mA (CDN ST08 1 Amp)

  Decoupling of Common Mode Disturbance: 150 kHz: Over 60 dB; 1.5 MHz: Over 60 dB; 30 MHz: Over 50 dB; 230 MHz: Over 40 dB (refer to data sheet for some exceptions)

  Dimensions: 4 x 4 x 9.5 inches (10 cm x 10 cm x 24 cm); (CDN HDMI and CDN S752A: 28.8 cm 11 inches)

  Frequency Range: 10 kHz to 80 MHz or 150 kHz to 230 MHz

  Mains & EUT Connections: BNC 50 Ω, N 50 Ω, BNC 75 Ω, N 75 Ω, XLR 3 pins, DIN 5 pins, RJ45, D-Sub 9 pins, D-Sub 15 pins, D-Sub 25 pins, HDMI (refer to data sheet for exact model specifications)

  RF Connector: BNC 50 Ω

  RF Input Voltage: 20 Volts Max

  Standards Met: IEC 61000-4-6, CISPR 22, IEC 60601-1-2

  Voltage Division Factor: 9.5 dB to 10 dB ±1 dB (refer to data sheet for some exceptions)

  Voltage Rating: AC max. voltage (line to ground): 100 V - 250V; DC max. voltage (line to ground): 150 V - 400 V; Test voltage: 200 V - 750 V DC, 2 sec (refer to data sheet for exact model specifications)

  Cost New:

  Was:

  Price Now:

  $1,190.00

• 

  Teseq CDN M016 Switchable 16 Amp Coupling/Decoupling Network

  SKU: 10827

  Associated Equipment: RF Conducted Immunity Test Systems

  Application/Test Type: switchable 2 or 3 power lines, (L+N or L+N+PE)

  Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω

  Current Rating: 16 Amps

  Decoupling of Common Mode Disturbance: 150 kHz: Greater than 30 dB 1.5 MHz: Greater than 60 dB 30 MHz: Greater than 40 dB 230 MHz: Greater than 20 dB

  Dimensions: 3.9" x 3.9" x 9.5" (100 mm x 100 mm x 240 mm)

  Frequency Range: 150 kHz to 230 MHz

  Insertion Loss: Less than 0.1 dB

  Mains & EUT Connections: 4 mm banana

  RF Connector: BNC 50 Ω

  RF Input Voltage: 30 Volts (Max)

  Standards Met: IEC/EN 61000-4-6

  Voltage Division Factor: 150 kHz to 80 MHz: 9.5 dB ±1 dB 80 MHz to 230 MHz: 9.5 dB +3 dB / -2 dB

  Voltage Rating: AC max. voltage (line to ground): 250 V DC max. voltage (line to ground): 400 V; 3 kV DC, 2 sec

  Cost New:

  Was:

  Price Now:

  $195.00 - $495.00

  Typically In Stock

  ORDERING OPTIONS

• 

  Teseq NSG 4070C-80 Integrated Signal Generator, 4 kHz to 1 GHz, 80 W Integrated Class A Power Amplifier

  SKU: sku-809

  Test Capabilities: RF Conducted Immunity

  Standards Met: IEC/EN 61000-4-6

  Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

  CDN Test Levels (w/ built-in amplifier): 40Vrms

  BCI Test Levels (w/ built-in amplifier): 8Vrms

  Frequency Range (w/ built-in amplifier): 150 kHz - 230 MHz

  Videos: Calibration Example, Remote Operation Setup

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Noiseken LSS-15AX Series Lightning Surge Simulator up to 15kV

  SKU: sku-800

  Weight: 200 kg.

  Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5

  Coupling: AC/DC lines CDN, and Telecom lines CDN

  Dimensions: 555 X 1250 X 790 mm

  Impedance: 2 Ohm

  Mains & EUT Connections: 4mm banana plug

  Phase synchronization: 0°-360°, 1°step or random

  Polarity: Positive, Negative, Alternate

  Pulse current (short circuit): 15kV/7500A

  Pulse repetition: 20 sec

  Pulse voltage (open circuit): 15kV/7500A

  Standards Met: IEC 61000-4-5

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Schloder M Type CDN's for Disturbance Signals to Unscreened Supply Lines (mains) AC + DC up to 1000V, 100A

  SKU: sku-791

  Application/Test Type: unscreened supply lines (mains) AC + DC

  Current Rating: 16A / 32A / 63 A / 100 A

  Dimensions: 160 x 84,5 x 240mm or 200 x 122,5 x 400mm depending on model

  Frequency Range: 150 kHz to 230 MHz

  Mains & EUT Connections: banana sockets

  RF Connector: 50 Ω BNC (Female)

  Standards Met: IEC / EN 61000-4-6

  Voltage Rating: up to 250 VAC / 400 VDC

  VIEW PRODUCT Cart

• 

  3 Phase EFT/Burst, Surge Combination Wave Test System

  SKU: 1785

  Application/Test Type: CE Marking, EMC Precompliance Testing

  Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4

  Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5

  Pulse amplitude: 0.2 – 5.0 kV

  Pulse current (short circuit): 0.1 – 2.5 kA ±10% (8 us ±20% risetime)

  Rentals Ship Today

  VIEW PRODUCT Cart

• 

  Schloder VIS 1700 Voltage Interruption Simulator

  SKU: sku-784

  Communication: BNC outputs (on rear) for voltage, current and scope triggering

  Coupling: BNC

  Dips, Interrupts & Variations: Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29

  General Data: Technical Details

  Mains & EUT Connections: 4mm banana line

  Output Current: AC max. 280 V, DC max. 3 6 0 V

  Peak inrush current capability: 16 Amps

  Phase synchronization: at any phase position 0° - 360 °

  Test duration: 0.1sec - 9990sec, furthermore single event and continuous operation

  Test Voltage: AC max. 280 V ,DC max. 3 6 0 V

  Applications: EMC Precompliance Testing, Conducted Immunity

  Typically In Stock

  VIEW PRODUCT Cart

• 

  EFT-DLC EFT/Burst Capacitive Coupling Clamp for Data Lines

  SKU: 1780

  Application/Test Type: Electrical Fast Transients on Data Lines (EFT Burst)

  Built in Accordance to: IEC 61000-4-4

  Coupling Length: 1 m (39.4 in)

  Compatible Impulse Generators: Any EFT/Burst Generators (custom HV cable may be required)

  RF Connector: Fischer HV Connector

  Voltage Rating: up to 5.0 kV

  Cost New:

  Was:

  Price Now:

  $195.00 - $2,495.00

  In Stock

  ORDERING OPTIONS

• 

  Rent EM Test TSS 500M2F Telecom Surge Simulator for FCC Part 68

  SKU: sku-776

  Weight: approx. 35kg

  Application/Test Type: Test levels as per FCC part 68

  Coupling: Telecom ports: Tip to Ground, Ring to Ground, Tip and Ring to Ground Power ports 250V/16A: L toN, L to PE, N to PE , L+N to PE

  Dimensions: 19“ / 6HU,

  Output Current: 64A – 1,000A (power line) 20 – 200A per wire (surge A)

  Outputs: 4 mm banana socket

  Polarity: pos / neg / alternate

  Rise time: Less than 2 us

  Telecom Surge: As per FCC part 68, Pulse B, IEC 61000-4-5, ITU and ETSI recommendations

  Test Voltage: 160V – 2,500V ± 10% (power line) 160V – 1,500V ± 10% (surge A)

  Trigger of bursts: Automatic pulse release

  VIEW PRODUCT Cart

• 

  A.R. 500A100A Solid State RF Amplifier, 500 Watts CW, 10 kHz - 100 MHz

  SKU: sku-775

  Weight: 150 lbs

  Dimensions: 19.8 x 16.8 x 21.7 in

  Flatness: .± 1.5 dB maximum ± 0.5 dB with internal leveling

  Frequency Range: 10 kHz - 100 MHz

  Gain: GAIN (at maximum setting).........57 dB minimum GAIN ADJUSTMENT (continuous range)....25 dB minimum

  Impedance: 50 ohms

  Input: 180 - 264 VAC 47 - 440 Hz, 2000 watts maximum @ 0.99 P.F. typical

  Output: POWER OUTPUT, CW Nominal .... 617 watts Minimum...... 500 watts Linear @ 1 dB compression .. 300 watts minimum

  RF Connector: Type N female

  RF Input Voltage: 1.0 milliwatt maximum for rated output

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Rohde & Schwarz SMF100A Microwave Signal Generator

  SKU: sku-770

  Warranty: 120 Days

  Frequency Range: 1 GHz to 22 GHz

  Resolution: 0.001 Hz

  RF Connector: R&S®SMF-B81

  Trigger: auto, external trigger, external gate

  In Stock

  VIEW PRODUCT Cart