EMC Test Equipment

(Showing 12 of 1198)
Show 12 24 36 48 96

EMC Test Equipment Categories

Transient Generators
Transient Generators
EMI Receivers/EMC Analyzers
EMI Receivers/EMC Analyzers
RF Power Amplifiers
RF Power Amplifiers
Electric Field Strength Measurement
Electric Field Strength Measurement
RF Conducted Immunity Test Systems
RF Conducted Immunity Test Systems
EMC Antennas
EMC Antennas
Line Impedance Stabilization Networks (LISN's)
Line Impedance Stabilization Networks (LISN's)
EMC Probes
EMC Probes
EM Coupling Clamps
EM Coupling Clamps
Coupling Decoupling Networks (CDN's)
Coupling Decoupling Networks (CDN's)
RF Current Probes/Monitors
RF Current Probes/Monitors
EMC/EMI Signal Generators
EMC/EMI Signal Generators
Calibration Equipment
Calibration Equipment
Software for EMC Testing
Software for EMC Testing

EMC Test Equipment Test Equipment, Systems & Solutions

  • E&I / ENI 2200L Class A Linear RF Power Amplifier

    E&I / ENI 2200L Class A Linear RF Power Amplifier

    SKU: 0725

    AC Input: 104 – 240 Volts 8.4 A @ 120 V4.2 A @ 240 V
    Frequency range: 10 KHz to 12 MHz
    Gain: 53 dB (nominal)
    Gain Flatness: +/- 1.5 dB
    Input Power for Rated Pout: 1 mW
    Output Impedance: 50Ω / 2:1 maximum
    Protection: Input: Unit will withstand input signal of +13 dBm without damage (1.0 V rms) max. and infinite load VSWR.
    Rated Power Output: 200 Watts (P1dB)
    Applications: Radiated Immunity
    $995.00 - $12,750.00
    In Stock
    ORDERING OPTIONS
  • Interface - Diamond Engineering DAMS Antenna Measurement Studio

    Diamond Engineering DAMS Antenna Measurement Studio

    SKU: 31971

    Features: 2D & 3D AZ-EL-F Plotting, Gain Calculation, Pathloss Calculators, Radar Cross-section Profiling, Beam Width vs Frequency and More
    Control Interface: USB/serial via DAMS controller
    Supported Data Formats: XLS (Excel), TXT (ASCII), S1P, DAMS formats
    Capabilities: Antenna Turntable/ Platform Movement, Data Collection, Data Calculation, Data Visualization, Data Manipulation, Import & Export Features
    Precision Antenna Turntables: DAMS 7000 DAMS 6000, DAMS 5000
    Immediate Download
    VIEW PRODUCT Cart
  • Keysight N1914A EPM Series RF Power Meter

    Keysight N1914A EPM Series RF Power Meter

    SKU: 10939

    Frequency Range: DC to 120 GHz (sensor dependent)
    Dynamic Range: -70 to +44 dBm (sensor dependent)
    Interfaces: GPIB, LAN LXI-C and USB connectivity
    Channels: 2 (Expandable to 4)
    $695.00 - $6,295.00
    In Stock
    ORDERING OPTIONS
  • Amplifier Research PL7004 800MHz - 3.6GHz Electric Field Pulse Laser Powered Probe

    Amplifier Research PL7004 800MHz - 3.6GHz Electric Field Pulse Laser Powered Probe

    SKU: 11935

    Amplitude Accuracy: Without correction factors applied: ±1.5 dB @ 1 GHz; With correction factors applied: Typical expanded measurement uncertainty (95% confidence interval), 0.8 dB, 800 MHz–1 GHz; 1.4 dB, 1GHz–3.6 GHz
    Damage Level: 1000 V/m, Continuous Field or Pulsed Field
    Frequency Range: 800MHz - 3.6GHz
    Isotropic Deviation: ±1.0 dB @ 1 GHz. For improved accuracy, this probe should be used with a single axis aligned with the E-field being measured.
    Operating Range: 80–800 V/m
    Pulse Duration: 0.02% to 2%
    Pulse Period: Up to 5 milliseconds between pulses (greater than 200 Hz pulse rate)
    Pulse Width: 1 to 100 Microseconds
    Relative Flatness: ±2.5 dB, 800 MHz-3 GHz; ±3.0 dB, 3.0GHz 3.6GHz
    Temperature Stability: +0.5 dB Over Operating Temperature Range
    Inquire for Availability
    VIEW PRODUCT Cart
  • Amplifier Research FL7030 5 kHz - 30 MHz Electric Field Laser Powered Probe

    Amplifier Research FL7030 5 kHz - 30 MHz Electric Field Laser Powered Probe

    SKU: 11934

    Weight: 62.5 g (2.2 oz)
    Accuracy: ±1.0dB @ 10MHz1 0.8dB, 100kHz–1GHz3,4 1.4dB, 1GHz–6GHz3,4
    Analog Response Time: 20 msec/up to 50 samples per second, at FI7000 USB and GPIB interfaces
    Calibration Data: Accredited Calibration Report (A2LA) supplied with probe
    Damage Level: 1000 V/m continuous field
    Data Returned From Probe: X, Y, Z axes, and Composite
    Dimensions: 5.7 x 5.7 x 5.7 cm (2.25 x 2.25 x 2.25 in) 2.92 cm (1.15 in) DIA spherical housing 3.18 cm (1.25 in) sensor radome per axes
    Fiber Optic Connectors: Two E2000 compact duplex connectors at 1 meter, includes fiber optic verification loop.
    Isotropic Deviation: ± 0.5 dB @ 10 MHz ± 0.5 dB, 5 kHz–30 MHz (typical)
    Linearity: ± 0.5 dB and ± 0.9 V/m
    Operating Range: 1.5–300 V/m
    Operating Temperature: 10˚C to 40˚C (50˚F to 104˚F) @ 5% to 95% RH non-condensing
    Power Requirements: Laser powered from FI7000 interface
    Rise time: Typical Analog 300nS
    Temperature Stability: ± 0.5 dB over operating temperature range
    VIEW PRODUCT Cart
  • Amplifier Research FA7006 6 GHz E-Field Probe

    Amplifier Research FA7006 6 GHz E-Field Probe Kit

    SKU: 11933

    Test Standards: IEC 61000-4-3
    Accuracy: ±1.0dB @ 10MHz1 0.8dB, 100kHz–1GHz3,4 1.4dB, 1GHz–6GHz3,4
    Damage Level: 1000 V/m
    Dimensions: 5.7 x 5.7 x 5.7cm
    Linearity: ±0.5dB
    Minimum Pulse Width: 2μs
    Operating Range: 9 – 900V/m
    Rise time: Typical Analog 300nS
    Temperature Stability: ±1.0dB, 10°C - 40°C8
    Typically In Stock
    VIEW PRODUCT Cart