EMC Test Equipment Categories
EMC Test Equipment Test Equipment, Systems & Solutions
-
-
SS8G-200 2 - 8 GHz, 200 Watt Solid State RF Power Amplifier
SKU: sku-2126
Weight: 40kg (88.1 lbs)Dimensions: 430 x 221 X 560 mmFlatness: ±4.0 dB MaxFrequency Range: 2 GHz - 8 GHzGain: 53 dB minimumImpedance: 50 ohmsInput: 180-240 VAC, 2500 wattsRF Connector: Type N femaleIN STOCK -
Rent Chroma 61605 Single Phase AC Power Source
SKU: sku-2125
Weight: 71 kg/165.2 lbsCurrent rating: 120 ampsDimensions: 400 x 482 x 600 mm (15.75 x 19 x 24 in)Frequency Range: DC, 15 Hz - 1.2 kHz (.15% accuracy)Output current: 16 Amps RMS (96 Amps Peak)Output voltage: 6000 VA max, 2000 VA per phaseVoltage ranges: 150-300 Volts$1,295.00 -
Inquire for Availability -
BiLA7G 25 MHz - 7 GHz Compact Bilog Antenna
SKU: 5483
Applications: EMC Precompliance Testing, Radiated Emissions, Radiated Immunity TestingTop Frequency Rante: 7 GHzBottom Frequency Range: 25 MHzGain: -27 to 7 dBiAntenna Factor (1 Meter): 7 to 47 dB/mMax CW Power: 1000 WattsConnector: N(f)$475.00Typically In Stock -
Amplifier Research 10S1G4A RF Amplifier, 700 MHz - 4.2 GHz, 10 Watts
SKU: 12103
Flatness: ± 1.5 dBFrequency Range: 0.7 – 4.2 GHz instantaneouslyGain: 40 dBHarmonic Distortion (THD): Minus 20 dBc maximum at 15 wattsImpedance: 50 ohms, VSWR 2.0:1 maximumOutput: 10 Watts minimum P1dBRF Input Voltage: 1.0 milliwatt maximum for rated outputIn Stock -
California Instruments 1501iX Programmable AC Power Source
SKU: 30090
Weight: per Chassis: Net: 61 lbs / 28 Kg, Shipping: 115 lbs / 52 KgCurrent rating: 120 ampsDimensions: Height: 7” (178 mm), Width: 19” (483 mm), Depth: 24” (610 mm) (depth includes rear panel connectors)Frequency Range: 16.00 - 81.91 Hz (0.01 Hz resolution) 81.0 – 819.1 Hz (0.1 Hz resolution) 820 – 1000 Hz (1 Hz resolution)¹Voltage ranges: 150-300 VoltsApplications: Conducted ImmunityTest Standards: IEC-61000-4-29$5,400.00In Stock -
AE Techron 7224 Linear Power Amplifier
SKU: 6792
Test Standards: DO 160 Section 16, 18, 19, SAE J113Frequency Range: DC - 300 kHzGain: Voltage Mode: 20 volts/volt Current Mode: 5 amperes/voltImpedance: 20k ohm differentialMax input power: ±10V, balanced or unbalancedOutput Impedance: 5.3 mΩ in series with 0.95 µHOutput voltage: ±150 VpAdditional Test Standards: ISO 16750-2, MIL-STD-461Applications: Radiated ImmunityTypically In Stock -
Teseq CDN M532 5-Line/32 Amp RF Coupling/Decoupling Network
SKU: 12093
Associated Equipment: RF Conducted Immunity Test SystemsCommon Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 ΩCurrent Rating: 32 Amps MaximumDecoupling of Common Mode Disturbance: Greater than 30 dBDimensions: 6.3 x 6.3 x 20 inches (16.0 cm x 16.0 cm x 50.0 cm)Insertion Loss: Greater than 0.1 dBMains & EUT Connections: 4 mm, safety (Optional IEC 320 16A)RF Connector: BNC, 50 ΩRF Input Voltage: Less than 30 VStandards Met: IEC 61000-4-6Voltage Division Factor: 10 dB +3 dB / -1 dBEMC Test Standard: IEC/EN 61000-4-6 -
$7,500.00 -
Wavecontrol WPF3-HP 100 kHz - 3 GHz E-Field Probe
SKU: 12068
Field Strength Range: 0.2 - 1,000 V/mApplication/Test Type: Monitoring electric field strengthsVideos: Menu Run-ThroughFrequency Range: 100 kHz - 3 GHzTypically In Stock -
Amplifier Research FL8009 Laser-Powered Electric Field Probe Kit, 20 MHz – 9.3 GHz, CW & Pulse
SKU: 12060
Application/Test Type: Radiated Immunity, Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF roomsFrequency Range: 20 MHz – 9.3 GHzTest Standards: IEC 61000-4-3Typically In Stock