Test Equipment
-
Teseq CDN 3083-Surge 620 Volt, 100-200 Amp Manual Coupler
SKU: sku-220
Weight: 80 kg (176 LB's)Application/Test Type: Manual Surge Testing for EUT up to 100Amps, 620 VAC; Three phase (5 wire); Two phase (4 wire); Single phase (3 wire)Current Rating: 100 Amp or 200 Amp continous depending on modelDimensions: 850 x 520 x 345 mmMains & EUT Connections: Fischer 105 series; Screw terminals, rated for 230 A -
AH Systems SAS-572 High Gain, Low VSWR Horn Antenna, 18 - 26.5 GHz
SKU: sku-193
Weight: 0.2 lb.'s (0.09 kg)3dB Beamwidth (E-Field): 15°3dB Beamwidth (H-Field): 15°Antenna Factor (1 Meter): 36.7 to 37.1 dB/mAntennas: Double Ridge Guide Horn Antenna -
AH Systems SAS-571 Broadband Double Ridge Horn Antenna
SKU: 4192
Weight: 3.5 lb.'s (1.59 kg)3dB Beamwidth (E-Field): 48°3dB Beamwidth (H-Field): 30°Antenna Factor (1 Meter): 22 to 44 dB/mAntennas: Double Ridge Guide Horn Antenna$249.00 - $395.00Typically In Stock -
Haefely AXOS5 Surge/EFT/Burst Impulse Generator up to 5 kV
SKU: 10180
Applications: Conducted Immunity Testing, CE Marking, Medical DevicesStandards Met: IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-11Max EUT AC Voltage (W/ Built In CDN): 264 VoltsMax EUT AC Current (W/ Built In CDN): 16 AmpsEFT/Burst Pulse Output Capability: 5.0 kV$975.00 - $1,795.00Typically In Stock -
Teseq CMAD 20B Common Mode Absorption Device, 1 MHz to 1 GHz, up to 20 mm Cable
SKU: 10141
Weight: approx. 3.4 kgDimensions: (LxWxH): 670 mm x 78 mm x 58 mmFrequency Range: 1 MHz to 1 GHzMax. Cable Diameter: 20 mmStandards Met: IEC/EN 61000-4-20;CISPR 13;CISPR 14-1;CISPR 15;CISPR 16-1-4;CISPR 16-2-3;CISPR 22;CISPR 32;EN 61000-6-3;EN 61000-6-4;IEC 60533$195.00 - $995.00In Stock -
Teseq CMAD 10 Common Mode Absorption Device for CISPR 22
SKU: sku-140
Weight: approx. 1.7 kgApplication/Test Type: Disturbance mode testing ideal for GTEM test cells for radiated emission and immunity testing.Dimensions: (LxWxH): 293 mm x 63 mm x 40 mmFrequency Range: 30 MHz to 1000 MHzStandards Met: IEC/EN 61000-4-20 -
Teseq CVP 2200A Capacitive Voltage Probe
SKU: sku-139
Frequency Range: 150 kHz to 30 MHzRF Connector: BNC 50 Ω, female -
Teseq VBA 6106A Biconical Antenna 30 MHz - 300 MHz
SKU: sku-131
Weight: approx. 1.3 kgDimensions: (L x H x W in mm): approx. 1360 X 770 X 515Frequency Range: 30 MHz to 300 MHzImpedance: approx. 6 kgRF Connector: N type female -
Teseq DPA 4000A Compact Biconical Antenna 200 to 1000 MHz
SKU: sku-127
Weight: 690 gDimensions: (L x W x H): 185 mm x 400 mm x 155 mmFrequency Range: 200 MHz to 1000 MHzImpedance: 50 Ω, nominalRF Connector: N female -
Teseq DPA 3000 Biconical Dipole Antenna 800 to 2800 MHz
SKU: sku-125
Impedance: 50 OhmsWeight: 180 gramsAntenna Factor (1 Meter): 30 dB/m to 38 dB/m (0.8 GHz to 2.5 GHz)Antennas: Dipole AntennasConnector: N female -
Teseq KEMA 801A RF Attenuation Clamp/Decoupling Network for IEC 61000-4-6
SKU: sku-122
Weight: approx. 5.5 kgDimensions: 670 mm x 100 mm x 79 mmFrequency Range: 150 kHz to 1000 MHzMax. Cable Diameter: 20 mmStandards Met: IEC/EN 61000-4-6; CISPR 24; EN 61000-6-1; EN 61000-6-2; IEC 60533; IEC 60601-1-2; IEC 61326 -
Teseq (Schaffner) KEMZ 801A EM Clamp Conform with IEC/EN 61000-4-6
SKU: sku-119
Weight: approx. 7 kgApplication/Test Type: Injects the disturbance signal through a combination of inductive and capacitive couplingClamp factor (CF): Max (0.15 to 400 MHz): 4 dB (50 Ω system) and 13.5 dB (150 Ω system)Connector: N-type femaleDimensions: 647 mm x 130 mm x 105 mm