Military & Aerospace Standards Categories
Military & Aerospace Standards Test Equipment, Systems & Solutions
-
Rent Rohde & Schwarz ESU40 EMI Test Receiver for CISPR and MIL-STD Testing
SKU: 30082
Frequency Range: 20 Hz to 40 GHz (DC coupled), 10 MHz to 40 GHz (AC coupled)Frequency Resolution: 0.01 HzFrequency Counter Resolution: 0.1 Hz to 10 kHzTest Standards: CISPR 16-1-1, MIL-STD-461Applications: Conducted Emissions, Radiated EmissionsInquire for Lead Time -
TWT18G-250 8 GHz - 18 GHz, 250 Watt RF CW Amplifier
SKU: sku-2218
Weight: 75 lbsDimensions: 19W x 25D x 8.75HFrequency range: 8.0 – 18.0 GHzGain: 54 dBRated Power: 250 watts -
PLA1M Passive Shielded Loop Antenna, 20 Hz - 1 MHz
SKU: 12109
Weight: 2.5 LBsDiameter: 22 3/8"Frequency Range: 20 Hz to 1 MHzRF Connector: BNC, Female$1,895.00Inquire for Availability -
FTC-10 - 10µF Microfarad Feed-Thru Capacitor
SKU: 30091
Capacitance: 10 µF (Microfarad)Tolerance: ±10%Temperature: -55°C to +70°C @ rated voltage +105°C @ 50% of rated voltageDissipation Factor: Less than 1% at 25°C (Measured at 120 Hz)Dielectric Strength: Twice the rated VDC @ 25°C for two minutesInquire for Lead Time -
Solar 2714-106R High Power Feed-Thru Capacitor
SKU: 6982
Applications: Military & Aerospace EMC TestingTest Standards: ±10%Max Voltage: 1200 VDC, 275 Volts @ 400 Hz, 500 Volts @ 60 HzMax Current: 500 AmpsTolerance: ±10%Dielectric Strength: Twice the rated VDC @ 25°C for two minutesStandards Met: SAE ARP-936 Insertion Loss Limits, Measured per MIL-STD-220C$295.00 - $4,795.00IN STOCK -
DRHA2G Double Ridged Horn Antenna
SKU: sku-363-1
Weight: 29.5 lbs. [13.4 kg]Applications: EMC Precompliance Testing, Radiated Emissions, RF Immunity TestingAntenna Factor: 10 to 27 dB/mDimensions: 27.2” x 37.2” x 37” [69 x 94.5 x 94 cm]Frequency Range: 200 MHz to 2 GHzGain: 11.5 dBiTypically In Stock -
Solar Solid State Amplifier 6552-1A 10 Hz - 100 kHz, 100 Watts for MIL-STD-461A/462
SKU: 4621
Input Impedance: 500 - 600 ohmsOutput Power: 100 watts at 1 KHz into 2.4 ohmsOutput Impedance: 2.4 ohmsOutput Voltage: 16 volts r.m.s. at 1000 Hz into 2.4 ohms (non-inductive) -
AMA60M100H Low Frequency Active Monopole 100 Hz - 60 MHz for MIL-STD, FCC, VDE and TEMPEST Testing
SKU: 8658
Antenna Factor (1 Meter): 0 dB/mApplication/Test Type: Active, general-purpose, receive-only antenna for FCC, MIL-STD-461, and TEMPEST TestingConnector: BNC (female)Dimensions: Ground Plane Dimensions: 18 in. X 18 in. (45.7 cm x 45.7 cm) Optional 24" (60cm) is available Rod Length: 8.5 in. - 43 in. (21.6 cm x 109.2 cm)Frequency Range: 100 Hz to 60 MHzImpedance: 50 ΩMounting Base: 1/4" 20 threadStandards Met: MIL-STD-461, VDE, FCC Part 15$350.00 - $3,525.00In Stock -
RL200K Radiating Loop Sensor for MIL-STD-461D/RS101
SKU: 12146
Weight: Radiating Loop: 2 pounds (0.9 kg) Loop Sensor: .25 pounds (0.11 kg)# of turns: Radiating Loop: 20 Loop Sensor: 51Antennas: Loop AntennasConnector: Radiating Loop: Binding posts Loop Sensor: BNCConstruction: Radiating Loop: Wire: 12 AWG, Loop Sensor: Wire: 30 AWG, Shielding: ElectrostaticDimensions: Radiating Loop: 4.72" diameter (12 cm) Loop Sensor: 1.574" diameter (4.0 cm)General Data: Technical Details -
PLA30M Passive Loop Antenna for IEEE 299, MIL-STD, NSA 65-6, ANSI C63.5 Compliance Testing
SKU: 12140
Weight: 2.5 lb.'s (1.13 kg)Dimensions: 29.8 cm in DiameterFrequency Range: 1 KHz to 30 MHzRF Connector: BNC, FemaleStandards Met: MIL-STD, CISPRIn Stock -
RFCP20M EMI Current Probe 20Hz to 20 MHz
SKU: 2135
Top Frequency Range: 20 MHzBottom Frequency Range: 20 HzAC Current Handling (DC-400Hz): 300 AmpsRF Current Handling (CW/Pulse): 150/200 AmpsStyle: Clamp OnDiameter: 1.25"Transfer Impedance: .025 OhmTest Standards: MIL 461 CE101 and other Conducted Emissions Standards"SHIPS IN 3-5 DAYS -
RFCP30M Current Monitor for MIL-STD Conducted Emissions Testing
SKU: sku-2074
Top Frequency Range: 30 MHzBottom Frequency Range: 10 kHzAC Current Handling (DC-400Hz): 200 AmpsRF Current Handling (CW/Pulse): 60 AmpsStyle: Clamp On (Fixed Window)Diameter: 4.5"Transfer Impedance: 1-5 OhmTest Standards: MIL 461 CE102