Clearance EMC Test Equipment

Clearance Categories

Used Field Monitors and Probes

Used Amplifiers

Used Pulse/Transient Generators

Used RF Test Equipment

Clearance Test Equipment, Systems & Solutions

Narda PMM COND-IS/10 RF Conductive Immunity Test System

SKU: 11334

Test Capabilities: RF Conducted Immunity

Standards Met: IEC/EN 61000-4-6

Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

CDN Test Levels (w/ built-in amplifier): 10Vrms

BCI Test Levels (w/ built-in amplifier): 3V

Frequency Range (w/ built-in amplifier): 150 kHz - 230 MHz

CDN's: Any type in stock (Pricing does not include a coupler)

Cost New:

Was:

Price Now:

$1,250.00 - $16,500.00

Typically In Stock

ORDERING OPTIONS
PMM L2-16B Two-line Single Phase V-Network

SKU: 6763

Frequency Range: 9 kHz to 30 MHz

Standards Met: CISPR 16-1-2 FCC Part 15

Continuous Rated Output Current: 16 Amps

Maximum Permissible Operating Voltage: 250 VAC; 350 VDC

Equivalent Circuit: 50 Ω // (5 Ω+ 50 μH)

RF Output Connector: BNC female

EUT connection: SCHUKO connector

Applications: Conducted Emissions, BCI Testing , Automotive EV EMC

Cost New:

Was:

Price Now:

$175.00 - $295.00

In Stock

ORDERING OPTIONS
Siglent SSA3032X Plus Spectrum Analyzer w/ EMI Software/Laptop

SKU: 3606

Applications: EMC Precompliance Testing, Spectrum Analyzers for EMI Measurements

Test Types: Conducted Emissions, Radiated Emissions

Frequency Range: 9 KHz ~ 3.2 GHz

Resolution Bandwidth (RBW): 1 Hz~1 MHz, in 1-3-10 sequence

Total Amplitude Accuracy: ± 0.7 dB

Display average noise level (DANL): -161 dBm/Hz (Normalized to 1 Hz (typ.)

Cost New:

Was:

Price Now:

$350.00 - $4,500.00

IN STOCK

ORDERING OPTIONS
EMCO (ETS-Lindgren) 3810-2 LISN, NEMA, 9 kHz - 30 MHz, 10 Amps

SKU: 11287

Application/Test Type: Power line conducted emissions tests

Current Rating: 10 Amps

Dimensions: 8.7 x 15 x 6 inches / 22.2 x 38.1 x 15.2 cm

Frequency Range: 9 kHz to 30 MHz

Inductors: 50 µH/250µH

Mains & EUT Connections: NEMA typical. (SCHUKO and British available upon request)

RF Connector: 50Ω BNC Monitor

Standards Met: FCC Part 15, VDE 0871, VDE 0875

Voltage Rating: 250 VAC (Line to Ground)

Cost New:

Was:

Price Now:

$195.00 - $1,975.00

In Stock

ORDERING OPTIONS
Schwarzbeck NNBL 8226 MIL-STD-461 LISN

SKU: 6862

Frequency Range: 9 kHz - 100 MHz

Max. cont. current: 70 A

Max. current (limited time): 100 A

Max Voltage (DC): 500 V

Max. Voltage (AC 50/60 Hz): 250 V

Max. Voltage (AC 400 Hz): 140 V

Impedance: (50μH + 5 Ω) || 50 Ω (+/- 20 %)

DC-Resitance mains-EuT: ca. 10 mΩ

EUT Connectors: Wing terminals

Test Standards: MIL-STD-461

Cost New:

Was:

Price Now:

$2,775.00

Typically in Stock

ORDERING OPTIONS
Amplifier Research PM2002 RF Power Meter

SKU: 1046

Interfaces: Inputs: Rear panel HEAD connectors and rear panel IEEE-488 connector standard. Outputs: Rear panel PWR/REF connector, 0dBm, 50 MHz. Rear panel RECORDER BNC connector, 0 to 10V into 1mW.

Frequency Range: 10 kHz to 40 GHz, power head dependent

Channels: 2

Power Measurement Range: -70dBm to +44dBm, power head dependent

Cost New:

Was:

Price Now:

$250.00 - $2,750.00

IN STOCK

ORDERING OPTIONS
ETS-Lindgren HI-4433-STE Isotropic Electric Field Probe

SKU: 9194

Isotropicity: ± 0.5 dB

Operating Temperature: 10ºC to 40ºC (50º F to 104ºF)

Fiber Optic Cable Connector: Standard FSMA

Dynamic Range: 30-3000 V/m

Frequency Response: 500 kHz to 5.0 GHz

Applications: Monitoring Electric Field Strengths

Test Standards: IEC/EN 61000-4-3

Cost New:

Was:

Price Now:

$1,025.00 - $10,250.00

Typically in Stock

ORDERING OPTIONS
Amplifier Research 5S1G4M31 Solid State Amplifier

SKU: 0769

Frequency Response: 0.8 GHz to 4.2 GHz instantaneously

Rated Power Output: 6.5 watts min.

Input for Rated Output: 1.0 milliwatt max.

Flatness: ±1.5 dB typical, ±2.0 dB maximum

Gain (at max. setting): 37 dB min.

Input Impedance: 50 Ω, VSWR 2.0:1 maximum

Output Impedance: 50 Ω nominal

Applications: Radiated Immunity

Cost New:

Was:

Price Now:

$375.00 - $2,975.00

In Stock

ORDERING OPTIONS
SS250M-700 Solid State Amplifier 10 MHz to 250 MHz, 1000 watts

SKU: 1713

Frequency Range: 10 MHz to 250 MHz

Power Output: 1000 watts minimum

Gain: 60 dB minimum

Input and Output Impedance: Nominal 50 Ω

Applications: Radiated Immunity

Test Standards: IEC 61000-4-6

Cost New:

Was:

Price Now:

$1,950.00 - $29,750.00

In Stock, Rental Only

ORDERING OPTIONS
RFCI-IEC-25 Conducted Disturbance Test Generator

SKU: 8021

Frequency Range: 100 kHz - 250 MHz

Power: 25 W

Measuring range: +30 dBm to – 40 dBm

Applications: RF Conducted Immunity, Conducted Immunity/Susceptibility Test Setup

Output Connector (Amplifier Monitor): BNC, 50 Ω / -40 dB (amplifier output), ±3 dB

Test Standards: IEC/EN 61000-4-6

Cost New:

Was:

Price Now:

$1,195.00 - $12,450.00

In Stock

ORDERING OPTIONS
IFI SMC10 Solid State Power Amplifier

SKU: 3461

Frequency Range: 80 MHz – 1 GHz

Rated Power: 10 W

Gain: 40 dB

Cost New:

$9,500.00

Was:

$11,500.00

Price Now:

$6,500.00

In Stock
Keysight/Agilent E4438C Vector Signal Generator

SKU: KEY-E4438C-CL

Frequency Range: 250 kHz - 3 GHz

Warranty: 100 Days

Condition (Scale 5-10): 8

Options: 400, 402, 503, 601, UNJ

Cost New:

$5,975.00

Was:

Price Now:

$275.00 - $3,975.00

In Stock

ORDERING OPTIONS