Clearance EMC Test Equipment

Clearance Categories

Used Field Monitors and Probes

Used Amplifiers

Used Pulse/Transient Generators

Used RF Test Equipment

Clearance Test Equipment, Systems & Solutions

EM Test MPG 200 Automotive Micropulse Generator up to 1.1 kV, built in CDN 60V/25A DC

SKU: 11818

Applications: Automotive Electrical Disturbances, EV EMC Testing

Standards Met: ISO 7637

Max EUT DC Voltage (w/ Built In CDN): 60 Volts

Max EUT DC Current (w/ Built In CDN): 25 Amps

Peak Inrush Current Capability: 50 Amps

Pre-Programmed Pulses: ISO 7637-2 (Pulse 1 and 6) "Output=DUT supply +/- Safety laboratory connectors Coupling To the battery +line Decoupling Via diode and battery supply switch DUT supply Max. 60V/25A"

Input: 115/230V +10/-15%

Repetition rate: 300us ± 10% (10 - 10%)

Test voltage: Test Voltage up to 1,100V and GOST PULSE 1B (24V), ISO PULSE 6 (12V/24V)

Cost New:

Was:

Price Now:

$875.00 - $4,500.00

In Stock

ORDERING OPTIONS
Teseq ITS 6006 Radiated Immunity Test System

SKU: 11290

Frequency Range: 80 MHz to 6 GHz

Input: External AM input: BNC socket, impedance more than 10 kΩ External PM input: BNC socket, TTL

Output: Generator outputs: 4x N sockets 50 Ω, 80 MHz to 6 GHz Interlock outputs: 4x BNC sockets External PM output: BNC socket, TTL, impedance more than 1.2 kΩ 10 MHz reference output: BNC socket, approx. 0 dBm/50 Ω

Reference frequency: 10 MHz

Applications: RF/Radiated Immunity & Susceptibility Testing

Test Standards: MIL-461 RS103, IEC/EN 61000-4-3, ISO 11452-2, DO-160 Section 20

Cost New:

Was:

Price Now:

$1,975.00 - $18,000.00

In Stock

ORDERING OPTIONS
AH Systems BCP-614 RF Current Measurement Probe, 100 Amps

SKU: 0452

Aperture: 2.6" (66 mm)

Current Rating: 100 Amps (500 Amps DC to 400 Hz)

Dimensions: 4.27" (134 mm)

Frequency Range: 10 KHz - 300 MHz

RF Connector: N-Type (female)

Standards Met: IEC 61000-4-6; IEC 60601-1-2, Mil-STD-461 CS 114

Transfer Impedance: -25 to 1 (dBohm)

Cost New:

Was:

Price Now:

$250.00 - $2,750.00

Typically In Stock

ORDERING OPTIONS
Rohde & Schwarz FSP30 9 kHz to 30 GHz Spectrum Analyzer Rental

SKU: 3708

Frequency Range: 9 kHz to 30 GHz

Resolution Bandwidth: 1 Hz to 10 MHz

Displayed Average Noise Level: -155 dBm (1 Hz)

Phase noise: -113 dB (1 Hz) at 10 kH

Total Measurement Uncertainty: 0.5 dB

Cost New:

Was:

Price Now:

$915.00 - $17,500.00

In Stock

ORDERING OPTIONS
Amplifier Research 25S1G4AM3 Broadband Amplifier 800 MHz to 4.2 GHz

SKU: 8693

Frequency Range: 800 MHz to 4.2 GHz

Connectors: N-Type (f)

Rated Power Output: 25 Watts (min.)

Input for Rated Output: 1.0 milliwatt (max.)

Flatness: ±1.5 dB typical, ±2.0 dB maximum

Gain: 44 dB (min)

Input Impedance: 50 ohms, VSWR 2.0:1 maximum

Applications: Radiated Immunity

Cost New:

Was:

Price Now:

$695.00 - $8,950.00

1 Unit Left

ORDERING OPTIONS
Noiseken JSS-003 JASO D001 Automotive Transient Surge Simulator

SKU: 45677

Test Standards: JASO D001-94

Max Power Capacity: 50 V DC, 10 A

Repetition Frequency of surge generation: 1 ~ 999999

Repetition cycle of surge generation: 30s ±10%

In Stock

VIEW PRODUCT Cart
Schaffner BEST EMC Precompliance Conducted Immunity Test System

SKU: 30069

Applications: EMC Precompliance Testing

Peak inrush current capability: 500 A Peak

Pulse amplitude: Adjustable voltage range: 250 V to 4400 V Voltage amplitude into 50 Ohms: 125 V to 2000 V (± 10%) Voltage amplitude into 1000 Ohms: 250 V to 4000 V (± 20%)

Pulse current (short circuit): 125 A to 2000 A

Test Standards: IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-11

Additional Test Standards: IEC 61000-4-29

Cost New:

Was:

$14,500.00

Price Now:

$11,900.00

In Stock
10µHz–1MHz Versatile High Performance Gain/Phase Frequency Response Analyzer

SKU: 5526

Frequency Range: 10 µHz to 1 MHz

Connectors: Isolated BNC

Max Input: 100 Vpk

Input Impedance: 1M // 50pF (exc. leads)

Signal Generator Impedance: 50 Ω ±2%

Applications: Conducted Emissions

Cost New:

Was:

Price Now:

$950.00 - $9,500.00

In Stock

ORDERING OPTIONS
Rigol DSA710 100kHz to 1GHz Spectrum Analyzer

SKU: 11015

Typically In Stock

VIEW PRODUCT Cart
Rohde & Schwarz FSP38 9 kHz to 40 GHz Spectrum Analyzer

SKU: 8828

Frequency Range: 9k Hz - 40 GHz

Bandwidth Accuracy: 5% nominal

Max. RF Power (CW): 20 dBm

Max. Pulse Voltage: 50 V

Output Impedance: 10 Ω

Output Frequency: 10 MHz

Input Frequency: 10 MHz

Cost New:

Was:

Price Now:

$1,150.00 - $17,500.00

In Stock

ORDERING OPTIONS
Agilent E7402A EMI Analyzer w/ Built In Limits for FCC, IEC, EN's Emissions Standards

SKU: 10288

Frequency range (dc coupled): 100 Hz - 3.0 GHz

Applications: EMC Precompliance Testing, Conducted Emissions, Radiated Emissions

In Stock

VIEW PRODUCT Cart
Teseq ISN T2A Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

SKU: sku-158

Frequency Range: 150 kHz to 80 MHz

RF Input Voltage: 15 V

Cost New:

Was:

$2,130.00

Price Now:

$1,597.50