Conducted Immunity Test Equipment

Conducted Immunity Categories

Electrical Noise/Transient Immunity

Bulk Current Injection (BCI) Test Equipment

Surge Simulation (Power & Telecom Lines)

Voltage Dips and Interruptions Testers

Low Frequency Conducted Immunity Testing

Electrostatic Discharge Immunity Test

Conducted Immunity Test Equipment, Systems & Solutions

EM Test EFT 500N5 Electrical Fast Transient/EFT/Burst Simulator

SKU: 10693

Test Capabilities: EFT Immunity

Standards Met: IEC/EN 61000-4-4

Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

Max EUT AC Voltage (w/ Built in CDN): 250 Volts

Max EUT AC Current (w/ Built in CDN): 32 Amps

Max EUT DC Voltage (w/ Built in CDN): 270 Volts

Max EUT DC Current (w/ Built in CDN): 32 Amps

EFT/Burst Pulse Output Capability: 4.8 kV

External Coupling: Data Lines & 3 Phase EUT

INQUIRE

VIEW PRODUCT Cart
3ctest CWS 600CT Combination Wave & Telecom Surge Simulator, 1.2/50us 8/20us 10/700us 5/320us

SKU: sku-333

Polarity: Positive, Negative or Alternate

Weight: Approx 15 kg (33 lbs)

Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5

Counter: 1-999

Coupling: Optional for external SPN series CDN's

Dimensions: 19 inch/6u

Frequency Range: 50/60Hz±5%

Front Time: Voltage: 10us±20%, time to half value: 700us±20%;

Impedance: 2 phm, Optional 12 ohm and 500 ohm

Mains & EUT Connections: 4mm banana plug

Output Current: Front time: 5us±20%, time to half value: 320us±20%

Polarity-2: Positive, Negative and Alternating

Pulse current (short circuit): 0.15 kA–3.0kA ±10% （2ohm）

Pulse Duration: 11s-99s （shortest depends on test voltage）

Pulse repetition: 1-999

Pulse voltage (open circuit): 0.3kV–6.0kV ±10%

RF Connector: BNC, 5VTTL

Standards Met: UL 1449, ANSI C62.41, IEC 61000-4-5, EN & IEC 60255-5, GB/T 17626.5

Telecom Surge: As per FCC part 68, Pulse B, IEC 61000-4-5, ITU and ETSI recommendations

Test duration: 6s-99s

Test Voltage: 0.2kV–6.0kV,±10%

Transfer Impedance: 15ohm, 40ohm （automatic switch)

Voltage Rating: AC 110V/220V , ±10%,

VIEW PRODUCT Cart
Electrical Fast Transient (EFT) Burst Immunity Component Level Test Setup

SKU: 30044

Bandwidth: DC to 500 kHz

Sampling Rate: 3 Msps

Resolution: 12 bit

Applications: Burst/EFT Testing, EMC Precompliance Testing

Test Standards: 61000-4-4

In Stock

VIEW PRODUCT Cart
Teseq NSG 3150 Combination Wave Surge Generator for IEC/EN 61000-4-5 up to 15 kV

SKU: 10795

Weight: Approx. 40 kg (88 lbs)

Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5

Coupling: IEC/external

Dimensions: 449 (17.7”) x 328 (12.9”; 7 HU) x 565 mm (22.2”)

Display Interface: 7“ touch-screen

Impedance: 2/12 Ω

Phase synchronization: asynchronous, synchronous 0 to 359º (in 1º steps)

Polarity: pos / neg / alternate

Pulse current (short circuit): ±250 A to 7.5 kA

Pulse repetition: 20* .... 600 s (in 1 sec steps) 1 .... 10 min.

Pulse voltage (open circuit): ±500 V to 15 kV (in 1 V steps)

Supply Voltage: 85 to 265 VAC, 50/60 Hz

Test duration: 1 to 9999 pulses, continuous

Equipment Group: Combination Wave Generators

Test Setup Overview: Surge Immunity Test, Setup, Equipment

VIEW PRODUCT Cart
Teseq INA 6502 PQF/Dip Transformer for NSG 3060

SKU: 3955

Test Standards: IEC/EN 61000-4-11

Compatible Generators: Teseq NSG 3060, Teseq NSG 3040

Applications: Conducted Immunity

Cost New:

Was:

Price Now:

$549.00 - $1,600.00

In stock

ORDERING OPTIONS
AR CI00 Series RF Conducted Immunity Systems

SKU: 10420

Test Capabilities: RF Conducted Immunity

Standards Met: IEC/EN 61000-4-6, CS114, ISO 11452-4, DO-160 CS"

Applications: Radiated Immunity Debugging, CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

CDN Test Levels (w/ built-in amplifier): 60Vrms

BCI Test Levels (w/ built-in amplifier): 400mA/114 dBµA

Frequency Range (w/ built-in amplifier): 9 kHz - 1 GHz

VIEW PRODUCT Cart
Noiseken ESS-B3011 & GT-30R Electrostatic Discharge Simulator System for up to 30kV Testing

SKU: 345

Weight: Generator : Approx. 4.8kg Discharge gun : Approx. 800g ( excluding cable and connector)

Standards Met: IEC 61000-4-2, ISO 10605

Air Discharge Voltage Range: 0.20kV30.0kV±5%（30.5kVmax）

Battery: AC100V to AC240V ±10% 50Hz／60Hz 62VA

Contact Discharge Voltage Range: 0.20kV30.0kV±5%（30.5kVmax）

Polarity: positive/negative

Pre-Programmed IEC Levels: Yes

Resolution: Air discharge mode : 2.0kV, 4.0kV, 8.0kV and 15.0kV step Contact discharge mode : 2.0kV, 4.0kV, 6.0kV and 8.0kV step

Typically In Stock

VIEW PRODUCT Cart
Haefely PEFT 8010 High Voltage EFT/Burst Generator, 7.3kV

SKU: 22006

Application/Test Type: Approval testing, Product development, Post design diagnostics, Industrial, Household

Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4

Burst frequency: 1 Hz … 110 kHz (Duration 0.01 - 999 ms)

Burst time: 0.1 Hz - 400 Hz; 2.5 ms - 10 s; 1 period - 500 periods

Coupling: Built-in Single Phase AC 264 Volts / 16 Amps 50-60Hz, 10 Amps from 16 - 400 Hz; 125V/10A DC (Modes: L-GND, N-GND, PE-GND, LN-GND, LPEGND, NPE-GND, LNPE-GND)

Pulse amplitude: 1.0 to 7.3kV (6.6 kV at CDN Output)

Repetition time: Impulses per second: max. 250 for Unom over 4 kV; Impulses per burst: max. 500 for Unom 4 kV

Standards Met: IEC/EN 61000-4-4 Ed. 1 + 2, IEC 61326, EN 61000-6-1, IEC 61850-3, EN 61000-6-2

Inquire for Availability

VIEW PRODUCT Cart
EM Test EFT 500N5.8 Burst Generator up to 4.8kV, w/ Built in 3-Phase Coupler, IEC 61000-4-4

SKU: sku-293

Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4

VIEW PRODUCT Cart
EM Test Dito ESD Simulator up to 16.5 kV for IEC/EN 61000-4-2

SKU: 10645

Voltage Range: 500V - 16,500V +/-5%

Electrostatic Discharge: Pulse conforms to IEC 61000-4-2 edition 2

Holding Time: More than 5 seconds

Resolution: 100V steps

Rise Time: 0.8ns +/- 25%

Supply Voltage: More than 70,000 pulses @ 16.5kV; automatic power-off after 10 minutes if not operated LiFePo4 12.8V - 1000mAh

Trigger: Automatic + Manual

VIEW PRODUCT Cart