Ametek CTS

Ametek CTS Test Equipment, Systems & Solutions

• 

  EM Test CWS 500N2.2 BCI Test System

  SKU: 21252

  Test Capabilities: RF Conducted Immunity

  Standards Met: MIL STD 461 CS 114, DO-160 CS Test

  Applications: Vehicle, Military and Aerospace, BCI Testing

  BCI Test Levels (w/ built-in amplifier): 400mA/114 dBµA

  Frequency Range (w/ built-in amplifier): 9 kHz - 400 MHz

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Teseq CDN 3083-Surge 620 Volt, 100-200 Amp Manual Coupler

  SKU: sku-220

  Weight: 80 kg (176 LB's)

  Application/Test Type: Manual Surge Testing for EUT up to 100Amps, 620 VAC; Three phase (5 wire); Two phase (4 wire); Single phase (3 wire)

  Current Rating: 100 Amp or 200 Amp continous depending on model

  Dimensions: 850 x 520 x 345 mm

  Mains & EUT Connections: Fischer 105 series; Screw terminals, rated for 230 A

  RF Input Voltage: Max. 8 kV / 4 kA

  Standards Met: IEC / EN 61000-4-5:2005, ANSI C62.45 standard, in IEC / EN 61000-4-12:2006 and ANSI C62.41

  Voltage Rating: 620 VAC RMS L-to-L (max. 440 V for NSG 3040 and Modula); 620 VAC RMS L-to-PE (max. 440 V for NSG 3040 and Modula); 620 VDC

  VIEW PRODUCT Cart

• 

  EM Test UCS 200N50 Automotive Transient Simulator

  SKU: 11183

  Applications: EMC Testing on EV Electric Vehicles Batteries & Charging Stations, Automotive Electrical Disturbances

  Standards Met: ISO 7637, DC 10614, SAE J1113,

  Max EUT DC Voltage (w/ Built In CDN): 80 Volts

  Max EUT DC Current (w/ Built In CDN): 50 Amps

  Peak Inrush Current Capability: 100 Amps

  Pre-Programmed Pulses: ISO 7637-2 (Pulse 1, 2a,3a/3b 6),SAE J1113, GM 3097, BMW, Volkswagen, PSA, Chrysler PF 9326, DC 10614, Renault, FIAT, Mitsubishi, Honda, Ford ES-XW7T

  Cost New:

  Was:

  Price Now:

  $975.00 - $5,495.00

  In Stock

  ORDERING OPTIONS

• 

  Teseq RFC 2020 RF-Switch

  SKU: sku-151

  VIEW PRODUCT Cart

• 

  Teseq RFB 2000 RF-Switch

  SKU: sku-150

  VIEW PRODUCT Cart

• 

  Teseq CMAD 20B Common Mode Absorption Device, 1 MHz to 1 GHz, up to 20 mm Cable

  SKU: 10141

  Weight: approx. 3.4 kg

  Dimensions: (LxWxH): 670 mm x 78 mm x 58 mm

  Frequency Range: 1 MHz to 1 GHz

  Max. Cable Diameter: 20 mm

  Standards Met: IEC/EN 61000-4-20;CISPR 13;CISPR 14-1;CISPR 15;CISPR 16-1-4;CISPR 16-2-3;CISPR 22;CISPR 32;EN 61000-6-3;EN 61000-6-4;IEC 60533

  Cost New:

  Was:

  Price Now:

  $195.00 - $995.00

  In Stock

  ORDERING OPTIONS

• 

  Teseq CMAD 10 Common Mode Absorption Device for CISPR 22

  SKU: sku-140

  Weight: approx. 1.7 kg

  Application/Test Type: Disturbance mode testing ideal for GTEM test cells for radiated emission and immunity testing.

  Dimensions: (LxWxH): 293 mm x 63 mm x 40 mm

  Frequency Range: 30 MHz to 1000 MHz

  Standards Met: IEC/EN 61000-4-20

  VIEW PRODUCT Cart

• 

  Teseq CVP 2200A Capacitive Voltage Probe

  SKU: sku-139

  Frequency Range: 150 kHz to 30 MHz

  RF Connector: BNC 50 Ω, female

  VIEW PRODUCT Cart

• 

  Teseq VBA 6106A Biconical Antenna 30 MHz - 300 MHz

  SKU: sku-131

  Weight: approx. 1.3 kg

  Dimensions: (L x H x W in mm): approx. 1360 X 770 X 515

  Frequency Range: 30 MHz to 300 MHz

  Impedance: approx. 6 kg

  RF Connector: N type female

  VIEW PRODUCT Cart

• 

  Teseq DPA 4000A Compact Biconical Antenna 200 to 1000 MHz

  SKU: sku-127

  Weight: 690 g

  Dimensions: (L x W x H): 185 mm x 400 mm x 155 mm

  Frequency Range: 200 MHz to 1000 MHz

  Impedance: 50 Ω, nominal

  RF Connector: N female

  VIEW PRODUCT Cart

• 

  Teseq DPA 3000 Biconical Dipole Antenna 800 to 2800 MHz

  SKU: sku-125

  Impedance: 50 Ohms

  Weight: 180 grams

  Antenna Factor (1 Meter): 30 dB/m to 38 dB/m (0.8 GHz to 2.5 GHz)

  Antennas: Dipole Antennas

  Connector: N female

  Dimensions: (L x W x H): 155 mm x 155 mm x 75 mm

  Frequency Range: 800 MHz to 2800 MHz

  Gain: -2.0 dB to +1.5 dB (0.8 GHz to 2.5 GHz)

  Impedance-2: 50 Ω, nominal

  Standards Met: CISPR 13, CISPR 14-1, CISPR 16-1-4, CISPR 16-2-3, CISPR 22, CISPR 32, EN 61000-6-3, EN 61000-6-4

  VSWR: Under 2.5:1 (1.0 GHz to 2.5 GHz)

  VIEW PRODUCT Cart

• 

  Teseq (Schaffner) KEMZ 801A EM Clamp Conform with IEC/EN 61000-4-6

  SKU: sku-119

  Weight: approx. 7 kg

  Application/Test Type: Injects the disturbance signal through a combination of inductive and capacitive coupling

  Clamp factor (CF): Max (0.15 to 400 MHz): 4 dB (50 Ω system) and 13.5 dB (150 Ω system)

  Connector: N-type female

  Dimensions: 647 mm x 130 mm x 105 mm

  Frequency Range: 10 kHz to 1000 MHz

  Impedance: 50 Ohms

  Max. Cable Diameter: 20 mm

  Maximum Continuous Power: 0.01 to 100 MHz: 100 W for 15 min; 100 to 230 MHz: 100 W for 3 min; 230 to 1000 MHz: 50 W for 3 min

  Standards Met: IEC/EN 61000-4-6; CISPR 24; EN 61000-6-1; EN 61000-6-2; IEC 60533; IEC 60601-1-2; IEC 61326

  VIEW PRODUCT Cart