Description
The dipole antenna DPA 3000 operates as a field strength measuring antenna in the frequency range 800 to 2800 (3000*) MHz. The DPA 3000 is constructed so that it can be converted easily to a Reference Radiation Source in combination with the Reference Spectrum Generator RSG 3000. It provides reference measurements between open area test sites and alternative facilities as e.g. anechoic chambers and GTEM-cells.
It may be used for calibration of these alternative facilities as well as for quick checks of antennas and test set-ups. Further this combination can be used to measure the attenuation of absorbing material or the shielding effectiveness of screening materials.*) with VSQ 3000/3002
Features & Specifications of Teseq DPA 3000:
- Antenna type: biconical dipole antenna
- Polarisation: linear
- Frequency range: 800 MHz to 2800 (3000*)MHz
- Antenna factor, typ.: 30 dB/m to 38 dB/m (0.8 GHz to 2.5 GHz)
- Isotropic gain, typ.: -2.0 dB to +1.5 dB (0.8 GHz to 2.5 GHz)
- VSWR, typ.: ≤ 2.5 (1.0 GHz to 2.5 GHz)
- Symmetry, typ.: ≤ 0.2 dB
- Cross-polar response: > 20 dB
- Output impedance: 50 Ω, nominal
- Connector: N female
- Max. power (cw): 10 W
- Size (L x W x H): 155 mm x 155 mm x 75 mm
- Support length: 95 mm
- Weight: 180 g
- Recommended tripods: BTP 6010 + BAA 6001 + CHA 9425A or BTP 6020A + BAA 6001
Videos
Custom Field
Impedance 50 Ohms
Weight 180 grams
Antenna Factor (1 Meter) 30 dB/m to 38 dB/m (0.8 GHz to 2.5 GHz)
Antennas Dipole Antennas
Connector N female
Dimensions (L x W x H): 155 mm x 155 mm x 75 mm
Frequency Range 800 MHz to 2800 MHz
Gain -2.0 dB to +1.5 dB (0.8 GHz to 2.5 GHz)
Impedance-2 50 Ω, nominal
Standards Met CISPR 13,
CISPR 14-1,
CISPR 16-1-4,
CISPR 16-2-3,
CISPR 22,
CISPR 32,
EN 61000-6-3,
EN 61000-6-4
VSWR Under 2.5:1 (1.0 GHz to 2.5 GHz)