Ametek CTS

(Showing 12 of 272)

Ametek CTS Categories

Amplifier Research

EM Test

Instruments for Industry (IFI) Amplifiers

Teseq (Schaffner)

Ametek CTS Test Equipment, Systems & Solutions

Amplifier Research 100W1000C RF Amplifier 1-1000 MHz, 100 Watt CW

SKU: sku-1309

Frequency Range: 1-1000 MHz

Output Power: 100 Watts

Flatness: ±2.0 dB maximum, ±1.5 dB typical, ±0.8 dB with internal leveling

Gain: 50 dB minimum

Input Impedance: 50 Ω, VSWR 2.0:1 maximum

Output Impedance: 50 Ω nominal

Inquire for Availability

VIEW PRODUCT Cart
Teseq ProfLine 2145-208 Harmonics & Flicker Measuring System

SKU: 11156

Phase synchronization: 3

Voltage Rating: 45 kv

Dual Range VAC: 150 V and 300 V

Dual Range VDC: 200 V and 400 V

Weight: 522 kg

Frequency Range: 16 Hz – 819 Hz

Inquire for Availability

VIEW PRODUCT Cart
Teseq CBL 6144 Ultra-broadband BiLog Antenna for Compact Chambers

SKU: 10118

Impedance: 50 Ohms

Weight: approx. 6.5 kg

Antenna Factor (1 Meter): 4 to 3 dB/m

Antennas: Bilogical Antennas

Application/Test Type: Ultra-broadband immunity antenna For compact chambers Reduced chamber coupling

Connector: N type female

Dimensions: (L x H x W in mm): approx. 1585 X 1570 X 670

Frequency Range: 26 MHz to 3 GHz (useable to 20 MHz)

Gain: 6 dB (200 MHz to 3 GHz) / 8 dB (700 MHz to 2.5 GHz)

Impedance-2: 50 Ω

Maximum Continuous Power: 600 Watts

Standards Met: IEC/EN 61000-4-3,CISPR 13,CISPR 14-1,CISPR 16-1-4,CISPR 16-2-3,CISPR 22,CISPR 24,CISPR 32,EN 61000-6-1,EN 61000-6-2,EN 61000-6-3,EN 61000-6-4,IEC 60533,IEC 60601-1-2,IEC 61326,ISO 11452-2

Inquire for Availability

VIEW PRODUCT Cart
Teseq NSG 4070B Conducted & Radiated Immunity Test System

SKU: 11159

1 review

Test Capabilities: RF Conducted Immunity

Standards Met: IEC/EN 61000-4-6

Applications: Radiated Immunity Debugging, CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

CDN Test Levels (w/ built-in amplifier): None

BCI Test Levels (w/ built-in amplifier): None

Frequency Range (w/ built-in amplifier): 4 kHz - 1 GHz

Videos: Calibration Example, Remote Operation Setup

Typically In Stock

VIEW PRODUCT Cart
Teseq UPA 6109 Log Periodic Antenna, 200 MHz to 1 GHz

SKU: 11136

Weight: approx. 1.5 kg

Dimensions: (L x W in mm): approx. 100 X 750

Frequency Range: 200 MHz to 1 GHz

Impedance: 50 Ω

RF Connector: N type female

VSWR: less than 2:1

Inquire

VIEW PRODUCT Cart
Teseq ITS 6006B Radiated Immunity Test System 80 MHz to 6 GHz

SKU: 10498

Frequency Range: 80 MHz to 6 GHz

Input: External AM input: BNC socket, impedance more than 10 kΩ External PM input: BNC socket, TTL

Output: Generator outputs: 4x N sockets 50 Ω, 80 MHz to 6 GHz Interlock outputs: 4x BNC socketsExternal PM output: BNC socket, TTL, impedance more than 1.2 kΩ10 MHz reference output: BNC socket, approx. 0 dBm/50 Ω

Test Standards: MIL-461 RS103, IEC/EN 61000-4-3, ISO 11452-2, DO-160 Section 20

Applications: ERF/Radiated Susceptibility Testing

Inquire for Availability

VIEW PRODUCT Cart
Amplifier Research ATH4G8 500 Watt Horn Antenna 4 - 8 GHz

SKU: sku-440

Weight: 0.6 kg (1.25 lbs)

Antennas: Double Ridge Guide Horn Antenna

Application/Test Type: FCC, MIL-STD, VDE and TEMPEST Testing

Dimensions: (without gain enhancer) 7.62 x 10.3 x 15.14 cm (3.00 x 4.06 x 5.96 in) (with gain enhancer) 21.6 x 21.6 x 30.5 cm (8.5 x 8.5 x 12 in

Frequency Range: 4-8 GHz

Impedance: 50 Ohms

VSWR: Maximum 1.6:1 Average 1.3:1

VIEW PRODUCT Cart
Amplifier Research ATH7G18 2800 Watt Horn Antenna 7.5 - 18 GHz

SKU: 10439

Weight: 0.6 kg (1.25 lbs)

Antennas: Double Ridge Guide Horn Antenna

Application/Test Type: FCC, MIL-STD, VDE and TEMPEST Testing

Connector: WRD 750 waveguide

Dimensions: without gain enhancer) 4.6 x 6.1 x 6.4 cm (1.8 x 2.4 x 2.5 in) (with gain enhancer) 8.9 x 11.4 x 13.3 cm (3.5 x 4.5 x 5.25 in

Frequency Range: 7.5–18GHz

Gain: see image

Impedance: 50 Ohms

Maximum Continuous Power: 2800 watts

Mounting Base: Waveguide bracket

VSWR: Maximum 1.2:1 Average 1.1:1

Inquire for Availability

VIEW PRODUCT Cart
EM Test (Lüthi) CNV 504N Series CDN For Unshielded Unsymmetrical Interconnection Lines

SKU: 30191

Standards Met: IEC 61000-4-5, EN/IEC 61000-4-12

Inquire for Availability

VIEW PRODUCT
Em Test CWS 500N3 Test Generator for Mil-STD-461, ISO 11452 and More

SKU: sku-253

Weight: Approx. 36kg

Amplifiers: low-frequency signal source with amplifier

Dimensions: 19"/6HU (555mm x 448mm x 286mm)

Frequency range: 10Hz - 250kHz

General Data: Technical Details

Harmonic Distortion (THD): less than -20dBc at 100W power 0.5ohm

Operating Temperature: 10°C - 40°C

Signal current: Max. 15A rms

Signal level: 0.001V - max. 7Vrms (14Vrms)

Signal power: 100W (nominal)

Supply Voltage: 115V or 230V +10/-15%, 50/60Hz

VIEW PRODUCT Cart
Teseq CDN 3063-S63 3 Phase, 63 Amp Automated Surge CDN Coupler for NSG 3040/3060

SKU: sku-218

Weight: 100 kg (220.5 lb)

Application/Test Type: Automated Surge Testing for EUT up to 63 Amps, 480 VAC; Three phase (5 wire); Two phase (4 wire); Single phase (3 wire)

Current Rating: 3 x 63 Amp continuous (peak 3 x 100 Amp for 30 min.)

Dimensions: 570 x 840 x 630mm (22.4 x 33 x 24.8")

Frequency Range: DC – 65 Hz with no loss, 400 Hz max. with power loss

Mains & EUT Connections: HV-surge pulse input from generator (Fischer connector); Connector for EUT supply input (Screw terminals Phoenix); Connector for EUT supply output (Screw terminals)

Standards Met: IEC / EN 61000-4-5:2005, ANSI C62.45 standard, in IEC / EN 61000-4-12:2006 and ANSI C62.41

Voltage Rating: EUT VAC line to line: 30 to 480 VAC rms; EUT VAC line to ground: EUT VAC 30 to 280 VAC rms, (below 30 V synchronisation not guaranteed, asynchronous mode only); EUT VDC: up to 125 VDC – full current range, up to 225 VDC – up to 7 A

Inquire for Availability

VIEW PRODUCT Cart
EM Test EFT 500N5 Electrical Fast Transient/EFT/Burst Simulator

SKU: 10693

Test Capabilities: EFT Immunity

Standards Met: IEC/EN 61000-4-4

Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

Max EUT AC Voltage (w/ Built in CDN): 250 Volts

Max EUT AC Current (w/ Built in CDN): 32 Amps

Max EUT DC Voltage (w/ Built in CDN): 270 Volts

Max EUT DC Current (w/ Built in CDN): 32 Amps

EFT/Burst Pulse Output Capability: 4.8 kV

External Coupling: Data Lines & 3 Phase EUT

INQUIRE

VIEW PRODUCT Cart