Ametek CTS

Ametek CTS Categories

Amplifier Research

EM Test

Instruments for Industry (IFI) Amplifiers

Teseq (Schaffner)

Ametek CTS

Amplifier Research 50T4G18, 50 Watts CW, 4.2–18GHz, (TWT) Microwave Amplifier

SKU: sku-717

Weight: 70 lbs, 32 kg

Dimensions: 19.8 x 6.5 x 27 in., 50.3 x 16.5 x 68.6 cm.

Flatness: ±10 dB maximum, 4.2 - 18 GHz

Frequency Range: 4.2–18GHz

Gain: GAIN (at maximum setting) ......47 dB minimum GAIN ADJUSTMENT (continuous range)......35 dB minimum

VIEW PRODUCT Cart
Teseq LNA 6000 Low Noise Amplifier 1 MHz to 3 GHz

SKU: sku-80

Weight: approx. 127 grams (0.3 Lb's)

Application/Test Type: Increase the sensitivity of virtually all spectrum analyzers and other RF measuring instruments.

Dimensions: 28 mm x 95 mm x 27 mm

Frequency Range: 1 MHz to 3 GHz (nominal range) 200 kHz to 4 GHz (utilizable range)

Gain: 12.5 dB (±0.3 dB flatness)

Inquire for Availability

VIEW PRODUCT Cart
Teseq MD 101 ESD Pulse Measurement Target

SKU: sku-33

Inquire for Lead Time

VIEW PRODUCT Cart
Teseq CDN S900S RS-232 Coupling Decoupling Network for IEC 61000-4-6

SKU: 10828

DUT Connector Type: RF CDN for RS-232 serial COM ports per ANSI/EIA/TIA-232

Application/Test Type: Coupling / decoupling network (CDN) for screened data/telcom lines or coaxial cables

Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω

Current Rating: 250 mA (CDN ST08 1 Amp)

Decoupling of Common Mode Disturbance: 150 kHz: Over 60 dB; 1.5 MHz: Over 60 dB; 30 MHz: Over 50 dB; 230 MHz: Over 40 dB (refer to data sheet for some exceptions)

Cost New:

Was:

$1,590.00

Price Now:

$1,200.00

In Stock
Amplifier Research FP6001 E-Field Probe

SKU: sku-1294-1

Application/Test Type: Radiated Immunity

Field Strength Range: 0.5 to 800 V/m

Frequency Range: 100 kHz to 6 GHz

Standards Met: IEC 61000-4-3

Interfaces: Fiber Optic

VIEW PRODUCT Cart
Amplifier Research FP5000 Isotropic E-Field Probe, 10 kHz - 1 GHz

SKU: 4902

Frequency Range: 10 kHz - 1 GHz

Response Time: 40 msec. minimum

Isotropicity: +/-0.5 dB on three orthogonal axes

Sensitivity: 1-300 V/M

Sampling Rate: 1-26 samples/second

VIEW PRODUCT Cart
Teseq ISN T800S Impedance Stabilization Network per CISPR 22/32 Figure D.3/G.3

SKU: 12861

Weight: 1.2 lbs. (0.55 kg)

Connectors: 105 x 65 x 110 mm

Current Rating: 600 mA (per line), 1.2 Amps (per pair)

Dimensions: see photo in images

Frequency Range: 150 kHz to 30 MHz

Typically in Stock

VIEW PRODUCT Cart
EM Test Netwave 3.1 Programmable AC/DC Power Source

SKU: sku-748

Frequency Range: DC - 5,000 Hz

Test Standards: IEC 61000-3-11, IEC 61000-3-12, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-7, IEC 60601-1-2 and more

Applications: Flicker and Harmonics Testing

Inquire for Availability

VIEW PRODUCT Cart
EM Test UCS500N7 Multifunctional Transient Immunity Simulator

SKU: sku-241

Test Capabilities: Combination Wave Surge Immunity , EFT/Burst, Dips Interrupts & Variations

EMC Standards: IEC 61000-4-5, IEC 61000-4-4, IEC 61000-4-11

Test Setup Guides: Electrical Transient and Noise, Surge Immunity, Power Failures

EFT/Burst Pulse Output Capability: ±200 V to 4.8 kV (in 1 V steps) - open circuit±100 V to 2.4 kV ±100 A to 2.2 kA

Combination/Wave Surge Output Capability: 250 V - 6,000 V ± 10%

Inquire for Availability

VIEW PRODUCT Cart
Amplifier Research 100W1000B 1 MHz - 1 GHz

SKU: 8287

Frequency Range: 1 MHz - 1 GHz

Output Power: 100 W

Flatness: ±2.0 dB maximum, 1.5 dB typical, ±0.8 dB with internal leveling

Gain: 50 dB minimum (at max setting)

Input Impedance: 50 ohms, VSWR 2.0:1 maximum

Typically In Stock

VIEW PRODUCT Cart
Teseq CDN 3425 Burst/EFT Coupling Clamp

SKU: sku-1065

Application/Test Type: Electrical Fast Transients on Data Lines (EFT Burst)

Compatible Impulse Generators: Any EFT/Burst Generators (custom HV cable may be required)

Standards Met: IEC / EN 61000-4-4

Inquire for Availability

VIEW PRODUCT Cart
Amplifier Research (AR) FL7006 Electric Field Probe Kit, 100 kHz - 6 GHz

SKU: 57543

Application/Test Type: Monitoring Electric Field Strengths

Field Strength Range: 0.5 to 800 V/m (0.01 V/m)

Frequency Range: 100 kHz to 6 GHz

Standards Met: IEC/EN 61000-4-3

Interfaces: USB, IEEE-488 (GPIB), RS-232 (serial), Fiber-Optic Serial

Typically In Stock

VIEW PRODUCT Cart