Test Applications

Test Applications Test Equipment, Systems & Solutions

• 

  3ctest CDN 405T8 Surge Coupler for High Speed Data Lines

  SKU: 6911

  Application/Test Type: Surge Immunity, Conducted Susceptibility

  Test Standards: IEC 61000-4-5

  Data Transmission Rates: 1,000 MBit/s

  PoE: Yes

  Max Surge Voltage: 5 kV

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Teseq MD 102A ESD Pulse Measurement Target for IEC/EN 61000-4-2

  SKU: sku-887

  Inquire for Lead Time

  VIEW PRODUCT Cart

• 

  EM Test Automotive Test System for ISO 7637-2

  SKU: 10596

  ISO Automotive Standards: ISO 7637-2, ISO 16750-2, ISO 11452-8

  SAE Automotive Standards: SAE J1113, SAE J1455

  Freestyle Mode Micropulses: Programmable Rise time 1us - 10us in steps of 1us; Pulse duration 50us - 10,000us; Int. resistor 2ohm - 100ohm in steps of 5ohm; 200ohm, 400ohm and 450ohm

  Input: DUT supply +/- DC voltage from VDS 200N or any other DC supply; Pulse 5, 7 From one LD 200N

  Micropulse: Micropulse module for test pulses 1, 2A and 6

  Trigger: automatic, manual, external, battery switch

  UCS 200N Models: Built-in coupling/decoupling networks: UCS 200N50, 80V/50A, 100A@500ms; UCS 200N100, 80V/100A, 150A@500ms; UCS 200N150, 80V/150A UCS 200N200 80V/200A

  Verification: As per Annex C of ISO 7637-2:2011 into 50ohm and 1,000ohm load

  Applications: EMC Testing on EV Electric Vehicles Batteries & Charging Stations, Automotive Electrical Disturbances

  Inquire for availability

  VIEW PRODUCT Cart

• 

  Keytek E503 Ring Wave Simulator for ANSI/IEEE C62.4 and UL 864

  SKU: 10546

  Pulse current (short circuit): Selectable at 200A max. or 500A max., when the open-circuit voltage is set to 6.0kV.

  Pulse repetition: 1 shot/9 seconds

  Pulse voltage (open circuit): 200V - 6.6kV ± 10%

  Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41

  Standards Met: ANSI/IEEE C62.41 Cat. A and B, and various UL standards, including UL 864

  Equipment Group: Ring Wave Generators/Simulators

  IN STOCK

  VIEW PRODUCT Cart

• 

  Materials for EFT/Burst Laboratory Test Setup

  SKU: 11245

  Floor Ground Plate Dimensions: 9" by 6" (Custom sizes available)

  Standards Met: IEC 60601-1-2, IEC 61000-4-2

  Applications: Test Setup for Burst/EFT, EMC Precompliance Immunity Testing

  Table Dimensions: .8 meters (H)

  Table Top Ground Plane: 1.6m x .8m

  Additional App Notes: EFT Waveform Verification, Troubleshooting EFT Failures

  IN STOCK

  VIEW PRODUCT Cart

• 

  Noiseken ESS-S3011A & GT-30RA Electrostatic Discharge Simulator System for up to 30kV Testing

  SKU: 8250

  Weight: Approx. 7.0kg (gun holder excluded) Approx. 7.5kg (gun holder included)

  Air Discharge Voltage Range: 0.20kV to 30.0kV±5%（30.5kVmax）10.0kV : 0.01kV step 30.0kV : 0.1kV step

  Standards Met: IEC 61000-4-2, ISO 10605

  Battery: AC100V to AC240V 50Hz／60Hz ±10% 75VA

  Contact Discharge Voltage Range: 0.20kV to 30.0kV±5% （30.5kVmax） 10.0kV : 0.01kV step 30.0kV : 0.1kV step

  Polarity: positive/negative

  Pre-Programmed IEC Levels: Yes

  Resolution: 10 Volt steps up to 10 kV; 100 Volt steps to 30 kV

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Em Test CWS 500N1.4 RF Conducted Immunity Test System for IEC 61000-4-6

  SKU: 11251

  Test Capabilities: RF Conducted Immunity

  Standards Met: IEC/EN 61000-4-6

  Applications: Radiated Immunity Debugging, CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

  CDN Test Levels (w/ built-in amplifier): 40Vrms

  BCI Test Levels (w/ built-in amplifier): 8Vrms

  Frequency Range (w/ built-in amplifier): 150 kHz - 230 MHz

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Teseq NSG 3040 Transient Immunity Test System

  SKU: 4141

  Test Capabilities: Combination Wave Surge Immunity, EFT/Burst, Dips Interrupts & Variations

  Standards Met: IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-11, IEC 61000-4-29

  Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

  Max EUT Voltage (w/ Built in CDN): 264 Volts

  Max EUT Current (w/ Built in CDN): 16 Amps

  EFT/Burst Pulse Output Capability: 4.8 kV

  Combination/Wave Surge Output Capability: 4.4 kV

  Generic Standards: IEC 61000-6-1, IEC 61000-6-2

  Cost New:

  Was:

  Price Now:

  $1,495.00 - $17,750.00

  In Stock

  ORDERING OPTIONS

• 

  SS400M4k EMC CS Power Amplifier 4 kHz to 400 MHz

  SKU: 9159

  RF Output Power: 75 - 250 Watts

  Frequency Range: 4 kHz - 400 MHz (Power derated from 4 - 9 kHz)

  Applications: Bulk Current Injection Testing

  Test Standards: MIL-STD 461 CS114, DO-160 Section 20

  Load VSWR: 100% mismatch tolerant

  Remote Interfaces: LAN TCP/IP

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  3 Phase Combination Wave Generator System

  SKU: 30127

  Standards Met: IEC 60601-1-2, IEC/EN 61000-4-5

  Applications: EMC Surge, CE Marking

  DUT Power Handling: 3 PH 16 Amps

  In Stock

  VIEW PRODUCT Cart

• 

  Keysight RF Power Measurement Equipment Package

  SKU: 31456

  Frequency Range: DC - 40 GHz (Sensor Dependent)

  Power Range: -70 to +44 dBm

  Measurement Types: Average, Pulse, Very Low Frequency (VLF)

  Applications: Radiated Immunity Testing

  Test Standards: IEC/EN 61000-4-3, MIL-STD-461 RS103, DO-160 Section 20, SAE J1113/4

  Dynamic Range: 80 dB typically

  Remote Control: GPIB, LAN, USB (RF meter dependent)

  Software: Keysight Pathwave Benchvue (Download)

  Cost New:

  Was:

  Price Now:

  $325.00 - $995.00

  Typically In Stock

  ORDERING OPTIONS

• 

  EMC Partner MIG1206 12kV Surge Generator

  SKU: 6527

  Telecom Standards: IEC/EN 61000-4-5 , ITU K-series and IEC 60950

  EMC Standards: IEC/EN 61000-4-5 Ed. 1 & 2, ANSI C62.45

  Max EUT Voltage: 480 Volts

  Max EUT Current: 32 Amps

  Combination/Wave Surge Output Voltage: 12.5 kV

  External Coupling: Data Lines (Surge), 3PH EUT

  Test Setup: EMC Surge Immunity Testing

  IN STOCK

  VIEW PRODUCT Cart