Test Application Categories
Test Application
-
Amplifier Research CI00400AM4 BCI RF Conducted Immunity Generator
SKU: sku-1076
Test Capabilities: RF Conducted ImmunityStandards Met: IEC/EN 61000-4-6, MIL-STD-461 CS114, ISO 11452-4, DO-160 Section 20Applications: BCI TestingCDN Test Levels (w/ built-in amplifier): 60VrmsBCI Test Levels (w/ built-in amplifier): 400mA/114 dBµATypically In Stock -
EVTS 150C06 Electric Vehicle High-voltage Electrical Performance Tester
SKU: 55113
Voltage Range: 0 to 1,500 Volts DCMaximum Current: 60 AmpsWaveform: Sine wave, triangular wave, slope waveTest Standards: ISO 21498-2, LV 123, VW 80300, MBN 11123Inquire for Availability -
$1,285.00 - $12,830.00Lead Time 2-4 Weeks -
LANGER P512 RF Power Injection and Measurement IEC 62132-4
SKU: 30056
High power injection: 2 W at 12 GHzRF-Measurements: Up to 12 GHzAttenuation: Less than 3 dB up to 12 GHzSWR: lower than 2Scope of delivery: P512 (RF probe), SMA-SMA 1m cable 18 GHz HS (high performance microwave cable with SMA), Power Supply UnitTypically In Stock -
EM Test RCB 200N1 Test Pulse Generator Ford EMC
SKU: 30192
Test Standards: FMC1278 CI 220 RI 130, Ford EMC, and moreApplications: EMC Testing on EV Electric Vehicles Batteries & Charging Stations, Automotive Electrical DisturbancesAccessories: Test Fixture per Ford FMC 1278 RI 130, RI 150$395.00 - $795.00In Stock -
Tektronix TDS3052C Oscilloscope 500 MHz
SKU: 12247
Bandwidth: 500 MHzChannels: 2Sample rates on all channels: 5.0 GS/sstandard record length on all channels: 10 kcontinuous waveform capture rate: 3,600 wfms/s$250.00 - $2,500.00In Stock -
LISN-CISPR16-100A 3-Phase, 100 Amp Line Impedance Stabilization Network
SKU: 12114
Current Rating: 100 Amps continuousFrequency Range: 9 kHz to 30 MHzInductors: 50 Ω // [5 Ω + 50 µH] with 250 µH chokeApplications: Conducted Emissions TestingStandards Met: CISPR 16-1-2; VDE 0876; FCC part15; MIL-STD 461$7,600.00Typically In Stock -
-
EM Test AIF 503N32.1 3-Phase Flicker Impedance Network
SKU: 21917
Standards Met: IEC 61000-3-11, IEC 61000-3-12, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-7 and moreApplication/Test Type: Medical Device EMC TestingBuilt-in Power Analyzer: EM Test DPA 503NCurrent Handling: 32 Amps per phaseRENTAL ONLY -
EM Test PFS 500 Power Fail Simulator for EN/IEC 61000-4-11
SKU: 1144
Test Standards: Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29Applications: Voltage dips, Voltage interruptions, Voltage variations, Inverse, EMC Precompliance Testing, Conducted ImmunityEUT Power Handling: AC up to 240V/16A$4,750.001 Unit -
Typically In Stock -
Thermo Keytek E510A 10kV Surge Generator
SKU: 10799
Standards Met: ANSI/IEEE C62.41 Cat. B and IEC 61000 4-5Phase synchronization: ±15° with optional coupler/decouplerPulse current (short circuit): 8/20µs, 0-5.05kA with 2 ohm effective source impedance, ±10%Pulse repetition: 1 shot/18 secondsPulse voltage (open circuit): 1.2/50µs, 0-10.1kV ±10% in 1 volt stepsTypically In Stock