Test Application Categories
Test Application
-
AH Systems PAM-1826 High Frequency Preamplifier, 18 - 26.5 GHz
SKU: sku-211
Weight: 1.1 lbs. / 0.5 kgApplication/Test Type: EMI Precompliance Testing Emissions Measurements, CE MarkingConnector: SMA(f) to SMA(f)Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)Frequency Range: 18 GHz - 26.5 GHz -
AH Systems PAM-0118P Broadband Preamplifier, 20 MHz - 18 GHz
SKU: 2669
Weight: 1.1 lbs. / 0.5 kgApplication/Test Type: Improve overall system sensitivity for field measurements.Connector: N(f) to N(f)Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)Frequency Range: 20 MHz - 18 GHzInquire for Availability -
AH Systems PAM-0207 Preamplifier, 20 MHz - 7 GHz
SKU: 10209
Weight: 1.1 lbs. / 0.5 kgApplication/Test Type: Improve overall system sensitivity for field measurements.Connector: N(f) to N(f)Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)Frequency Range: 20 MHz - 7 GHz -
Haefely AXOS5 Surge/EFT/Burst Impulse Generator up to 5 kV
SKU: 10180
Applications: Conducted Immunity Testing, CE Marking, Medical DevicesStandards Met: IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-11Max EUT AC Voltage (W/ Built In CDN): 264 VoltsMax EUT AC Current (W/ Built In CDN): 16 AmpsEFT/Burst Pulse Output Capability: 5.0 kV$1,795.00Typically In Stock -
Teseq LNA 6018 Low Noise Amplifier 1 GHz to 18 GHz
SKU: sku-83
Weight: 220 grams (0.3 Lbs)Application/Test Type: Significantly increase the sensitivity of virtually all spectrum analyzers and other RF measuring instrumentsConnector: IN: SMA female 50 Ohms; OUT: SMA male 50 OhmsDimensions: 39 mm x 88 mm x 36 mmFrequency Range: 1 GHz - 18 GHz -
Teseq LNA 6900 Low Noise Amplifier 9 kHz to 2 GHz
SKU: sku-81
Weight: 0.27 Lb's (127 grams)Connector: N-type 50 OhmsDimensions: 28 mm x 95 mm x 27 mmFrequency Range: 1 MHz to 3 GHz (nominal range); 200 kHz to 4 GHz (utilizable range)Gain: 12.5 dB (±0.3 dB flatness) -
Teseq MD 103 1 Ohm Current ESD Pulse Target
SKU: 10035
Resistance: 1.00 Ohm - ± 1% 1.00 Ohm when match with 50 Ohm loadFrequency Range: DC - 4 GHzGrounding Plane & Cal Setup: Avaialble at ESDGuns.com$1,250.00Typically In Stock -
PMM 9010
SKU: 11026
Frequency Range: 10 Hz - 30 MHzApplications: Conducted EmissionsTest Standards: CISPR 14, CISPR 16-1-1$4,700.00In Stock -
Teseq INA 4381 ISO 10605 Discharge Network
SKU: 10022
Standards Met: ISO 10605Resistance/Capacitance: 150pF/2000OhmTypically In Stock -
BCI200M Current Injection Clamp for IEC 61000-4-6
SKU: 11910-1
Frequency range: 100 kHz up to 250 MHzInner diameter: 1.06" (27 mm)Application: RF Current Monitoring, EMC BCI Test SetupPower Rating: 350 mAInsertion Loss: 5 dB typ.; 50 Ohm system (100 Ohm loop impedance)$4,750.00In Stock -
Chroma 61505 Power Source for Precompliance EMC Testing
SKU: 9955
Ouput Power (Single Phase): 4000VACVoltage: 150V/300V/AutoMax Current: 32A/20A (150V/300V)Programmable Output Impedance Range: 0Ω +200µH ~ 1Ω +1mH RangeDC Output Capability: 16A/8A (212V/424V) 2,000 Watts$1,950.00In Stock -
Magnetic Field Immunity Test System per IEC 61000-4-39
SKU: 88641
- Coil sets with matching network, stand and corresponding cables for different frequency ranges
- Utilized with the RFCI-MIL and preamplifier as a complete test set for IEC 60601-1-2
- System achieved radiated and magnetic field immunity tests according to IEC 61000-4-39
- Software for impedance matching between amplifier and loop sensor
- Rentals Ship Same Day
Typically In Stock