Test Equipment by EMC & Compliance Standards

Standards Categories

CE Mark Testing

FCC Part 15

International (IEC/EN)

Automotive EMC Standards

Telecom Testing

Standards by Product/Industry

Standards Test Equipment, Systems & Solutions

3ctest CCC100 EFT/Burst Coupling Clamp for IEC/EN 61000-4-4

SKU: 10621

Application/Test Type: Electrical Fast Transients on Data Lines (EFT Burst)

Cable Diameter: up to 40 mm (1.57 in)

Coupling Length: 1 m (39.4 in)

Dimensions: 1040x140x110mm

EFT Coupling Clamps: as per IEC 61000-4-4

RF Connector: High voltage connector,coaxial. GND connection 4 mm plug, banana

Standards Met: IEC/EN 61000-4-4

Voltage Rating: up to 5.5kv

4 to 6 Weeks

VIEW PRODUCT Cart
Com-Power AM-741R Active Monopole Antenna with RAI-100, 9 kHz - 60 MHz

SKU: 3525

Weight: 9.5 lbs. [4.3 kg]

Antenna Factor (1 Meter): ±0.5 dB

Antennas: Monopole Antennas

Application/Test Type: radiated emissions measurements, typically below 30 MHz.

Connector: BNC (female)

Frequency Range: 9 kHz to 30 MHz (useable to 60 MHz)

Gain: See Image Thumbnail

Impedance: 50 Ohms

Mounting Base: 1/4" 20 thread

Standards Met: Mil-STD 461,DO-160

Cost New:

Was:

Price Now:

$299.99 - $4,325.00

In Stock

ORDERING OPTIONS
Narda PMM COND-IS/10 RF Conductive Immunity Test System

SKU: 11334

Test Capabilities: RF Conducted Immunity

Standards Met: IEC/EN 61000-4-6

Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

CDN Test Levels (w/ built-in amplifier): 10Vrms

BCI Test Levels (w/ built-in amplifier): 3V

Frequency Range (w/ built-in amplifier): 150 kHz - 230 MHz

Typically In Stock

VIEW PRODUCT Cart
Thermo Keytek ECAT Transient Generator System

SKU: 11321

Pulse current (short circuit): Selectable at 200A max. or 500A max., when the open-circuit voltage is set to 6.0kV.

Pulse repetition: 1 shot/9 seconds

Pulse voltage (open circuit): 200V - 6.6kV ± 10%

Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41

Standards Met: ANSI/IEEE C62.41 Cat. A and B, and various UL standards, including UL 864

In Stock

VIEW PRODUCT Cart
Pearson 411 Surge Current Monitor up to 5kA Peak Current, 1Hz to 20 MHz

SKU: P-411

AC Current Handling (DC-400Hz): 50 Amps

RF Current Handling (CW/Pulse): 50/5,000 Amps

Style: Fixed Window

Diameter: 0.5"

Transfer Impedance: 1 Ohm

Test Standards: IEC 61000-4-5

Frequency Range: 1 Hz to 20 MHz

SEVERAL IN STOCK

VIEW PRODUCT Cart
Teseq MD 101 ESD Pulse Measurement Target

SKU: sku-33

Inquire for Lead Time

VIEW PRODUCT Cart
Schloder CWG 1500 Surge Generator, 4.4 kV, 2.2 kA, EN/IEC 61000-4-5

SKU: sku-783

Condition (5-10 Scale): 9

Warranty: 6 Months

Calibration: Fresh w/ Data at Time of Order

Test standard: IEC 61000-4-5

Accessorries: Complete

Input: 120VAC/1PH

Phase synchronization: 0 - 359°, step 1° net sync. triggering

Polarity: pos / neg / alternate

Pulse current (short circuit): 0.1 - 2.2 kA

Pulse voltage (open circuit): 0.2 - 4.4 kV

Test duration: 10 - 990 sec

Cost New:

Was:

Price Now:

$7,950.00

1 LEFT
Com-Power CDN-M525E 5-Line Coupling Decoupling Network for Unscreened Power Lines

SKU: 10475

Current Rating: 25 Amps AC / 17 Amps DC (Max)

Decoupling of Common Mode Disturbance: ≥ 40dB (EUT/AE)

Frequency Range: 150 kHz to 230 MHz

Mains & EUT Connections: 4 mm shrouded banana sockets

RF Connector: 50 Ω BNC (Female)

RF Input Voltage: 40 V (Max)

Standards Met: IEC / EN 61000-4-6

Voltage Division Factor: 9.5 dB +4 / -1

Voltage Rating: 250 V AC / 350 V DC (Line to Ground)

Cost New:

Was:

Price Now:

$589.00 - $3,275.00

In Stock

ORDERING OPTIONS
EFG-40G High-Frequency E-Field Generator

SKU: 11750-1

Top End Frequency: 40.0 GHz

Bottom End Frequency: 26.5 GHz

Gain: 35 dB

Test Standards: MIL-STD-461 RS103, DO-160

Output Power: 50 V/m at 1 meter

Input Voltage: 100 - 240 VAC ±10% 50/60 Hz

Return Loss: 10 dB

Standards: MIL-STD-461

Applications: Radiated Susceptibility Testing

Rentals Ship Today

VIEW PRODUCT Cart
CISPR 25 Low Relative Permittivity Support

SKU: sku-2043

In stock

VIEW PRODUCT Cart
MFG-1000 Magnetic Field Generator & Ripple Current Tester

SKU: 11959

Field Strength Range: 1000 A/m up to 1000 Hz

Frequency Rnange: DC to 250 kHz

Test Standards: STD-461 (CE101, CS101, CS109), EN 61000-4-16, IEC / EN 61543

Inquire for Availability

VIEW PRODUCT Cart
Teseq ISN T800S Impedance Stabilization Network per CISPR 22/32 Figure D.3/G.3

SKU: 12861

Weight: 1.2 lbs. (0.55 kg)

Connectors: 105 x 65 x 110 mm

Current Rating: 600 mA (per line), 1.2 Amps (per pair)

Dimensions: see photo in images

Frequency Range: 150 kHz to 30 MHz

Isolation: Cat 3 - 150 kHz to 30 MHz: 39.3 to 55 dB Cat 5 - 150 kHz to 2 MHz: 65 dB Cat 5 - 2 MHz to 30 MHz:: 49.3 dB to 65 dB

Mains & EUT Connections: RJ11 and RJ45

RF Connector: 50Ω N-type (female)

Standards Met: CISPR 16-1-2, CISPR 22/32

Voltage Rating: 63 VAC 100 VDC

Typically in Stock

VIEW PRODUCT Cart