PMM / Narda EMC Test Equipment

PMM / Narda Categories

Narda RF Meters

PMM EMC Products

PMM / Narda Test Equipment, Systems & Solutions

Narda PMM EP-602 5 kHz - 9.25 GHz Broadband Active Electric Field Probe

SKU: 5497

Application/Test Type: Monitoring Electric Field Strengths

Field Strength Range: 1.5 to 1500 V/m (0.01 V/m)

Frequency Range: 5 kHz to 9.25 GHz

Standard Met: IEC/EN 61000-4-3

Interface: Fiber-Optic

Battery Life: 60-80 hours

Dynamic Range: 1,5 to 1500 V/m, 60 dB single range

Typically In Stock

VIEW PRODUCT Cart
PMM L3-64/690V 690 Volt LISN for IEC 60309, UL1682, UL1686

SKU: 10264

Weight: 50 kg (110 pounds)

Application/Test Type: Ancillary device intended for repeatable and accurate measurement of the disturbance voltage that an EUT (Equipment Under Test) may inject into the power line or mains.

Current Rating: 63 Amps Max (IEC60309); 60 Amps Max (UL1682, UL1686)

Dimensions: 465 x 450 x 740 mm (18 x 17.7 x 29 inches)

Frequency Range: 9 kHz to 30 MHz

Inductors: 50 Ω // [5 Ω + 50 µH] with 250 µH choke

Mains & EUT Connections: 4P5W connector

RF Connector: BNC (f)

Standards Met: IEC 60309; UL1682; UL1686; CISPR 16-1-2; VDE 0876; FCC part 15; MIL-STD 461F

Voltage Rating: 400 VAC, 565 VDC (L-PE, N-PE) 690 VAC, 975 VDC (L-L, L-N)

VIEW PRODUCT Cart
PMM (Narda) LP-03 Log Periodic Antenna, 800 MHz - 6 GHz

SKU: 10238

Weight: 0.25 kgs (0.6 LB's)

Antenna Factor (1 Meter): 23 / 42 dB typical

Antennas: Log Periodic Antennas

Application/Test Type: Radiated emissions and immunity

Connector: Type-N(m) or Type-N(f)

Dimensions: 18.7 cm x 32.5 cm x 8.1 cm

Frequency Range: 800 MHz to 6 GHz

Gain: 3.5 to 6.5 dBi typical

Impedance: 50 Ω nominal

Maximum Continuous Power: 75 Watts

Mounting Base: Tripod adapter, supplied

Standards Met: IEC 61000-4-6, MIL-STD-461F, DO-160

VSWR: Less than 1.7:1 typical

VIEW PRODUCT Cart
PMM L3-500 500 Amp, 9 kHz - 30 MHz Line Impedance Stabilization Network (LISN)

SKU: 10062

Weight: 248 kg (546 pounds)

Application/Test Type: LISN for AC Three phase plus neutral V-Network power circuits

Current Rating: 300 Amps continuous (500 Amps for 20 minutes)

Dimensions: 555 x 930 x 830 mm (21 x 36.6 x 32.6 inches)

Frequency Range: 9 kHz to 30 MHz

Inductors: 50 Ω // [5 Ω + 50 µH] with 250 µH Choke or Bypass

Input: 230 V - 50/60 Hz, 50 VA each line

Mains & EUT Connections: M14 bolts

RF Connector: BNC (f)

RF Input Voltage: BNC (f)

Standards Met: CISPR 16-1-2; VDE 0876; FCC part 15; MIL-STD 461F

VIEW PRODUCT Cart
PMM L3-100 Three Phase 100 Amp LISN for CISPR 16-1-2

SKU: 10058

Weight: 70 kg (154 pounds)

Current Rating: 100 Amps continuous (125 Amps overload for 5 minutes)

Dimensions: 465 x 450 x 740 mm (18.3 x 17.7 x 29 inches) - mounted on pallet for mobility

Frequency Range: 9 kHz to 30 MHz

Inductors: 50 Ω // [5 Ω + 50 µH] with 250 µH choke

Mains & EUT Connections: 125 A plug and socket outlet according to IEC309 standard

RF Connector: BNC (f)

Standards Met: CISPR 16-1-2, VDE 0876, FCC Part 15, MIL-STD 461F

Voltage Rating: 230 VAC, 325 VDC (L-PE and N-PE); 400 VAC, 565 VDC (L-L and L-N)

Inquire for Availability

VIEW PRODUCT Cart
PMM VDH-01 Van der Hoofden test-head

SKU: 10050

VIEW PRODUCT Cart
PMM 9010

SKU: 11026

Frequency Range: 10 Hz - 30 MHz

Applications: Conducted Emissions

Test Standards: CISPR 14, CISPR 16-1-1

Cost New:

Was:

Price Now:

$495.00 - $5,500.00

In Stock

ORDERING OPTIONS
Narda SRM-3000 Selective Radiation Meter

SKU: 5773

Frequency range: 100 kHz to 3 GHz

Modes: Spectrum Analysis Safety Evaluation, UMTS – P-CPICH Demodulation Time Analysis

Upper limit of measurement range (MR): -27 dBm to +23 dBm (in steps of 1 dB)

Display range: From noise floor up to +26 dBm

Maximum RF power: +30 dBm

Applications: RF Interference Analysis and EMF Sniffing

Intrinsic noise: -120 dBm for 1 kHz RBW, f > 20 MHz and no RF attenuation

RF Input Type: N connector, 50 Ω

Cost New:

Was:

Price Now:

$495.00 - $6,975.00

In Stock

ORDERING OPTIONS
Narda (PMM) NBM E-Field-Probe EF 1891, 3 MHz - 18 GHz

SKU: 30128

Frequency Range: 3 MHz to 18 GHz

Probe Type: Electric E-Field

Measurement Range: 0.6 to 800 V/m (CW), 0.6 to 65 V/m typ. (True RMS)

Dynamic Range: 62.5 dB

Directivity: Isotropic (Tri-axial)

Applications: Radiated Emissions Testing, Radiated Immunity

Test Standards: IEC 61000-4-3

Typically in Stock

VIEW PRODUCT Cart
Narda EF 0392 E-Field Probe for NBM-520, 100 kHz - 3 GHz, 1300 V/m

SKU: 1398

Frequency Range: 100 kHz to 3 GHz

Probe Type: Electric E-Field

Measurement Range: 0.8 to 1300 V/m (CW), 0.8 to 36 V/m (True RMS)

Dynamic Range: 64 dB

Directivity: Isotropic (Tri-axial)

Applications: Radiated Emissions Testing

Test Standards: IEC 61000-4-3

In Stock

VIEW PRODUCT Cart
Narda EF 5091 E-field Probe for NBM-520, 300 MHz - 50 GHz

SKU: 5091

Frequency Range: 300 MHz to 50 GHz

Probe Type: Electric E-Field

Measurement Range: 8 to 614 V/m

Dynamic Range: 37 dB

Directivity: Isotropic (Tri-axial)

Applications: Radiated Emissions Testing, Radiated Immunity

Test Standards: IEC 61000-4-3

In stock

VIEW PRODUCT Cart
Narda HFD-0191 H-field Probe

SKU: 61741

Frequency Range: 27 MHz to 1 GHz

Probe Type: Isotropic (non-directional)

Measurement Range: 0.016 to 16 A/m (CW), 0.016 to 1 A/m (True RMS)

Dynamic Range: 62 dB

Applications: Radiated Emissions Testing, Radiated Immunity

Test Standards: IEC 61000-4-8

In Stock

VIEW PRODUCT Cart