MIL-STD-461 CS101 Test Setup and Equipment Rental Package

MIL-STD-461 CS101 Test Equipment Setup Rental Package

Condition:
New
Test Standards:
MIL-STD-461 CS101
Applications:
Conducted immunity and susceptibility, EMC precertification testing
Frequency Range:
30 Hz to 150 kHz (Extendable down to 2 Hz and up to 500 kHz)
Test Setup:
Quick Start Guide Provided
Shipping:
Same Day, Larger Systems go Freight
Manufacturer:
The EMC Shop
Online Orders Ship Same Day
$1,975.00

 

SKU:
sku-2047-MO
Availability:

Usually ships in 24 hours.

Getting Started...

Overview

The EMC Shop will provide a turnkey package with all the hardware and software needed to complete MIL-STD-461 CS101 testing. Inquire for pricing and delivery time

Test Equipment Setup Requires:

  1. Signal generator
  2. Power amplifier
  3. Oscilloscope or measurement receiver
  4. Coupling transformer
  5. Capacitor, 10 μF
  6. Isolation transformer
  7. Resistor, 0.5 ohm
  8. LISNs
  9. Transducer for measurement receiver

Key Considerations

Manufacturer:
The EMC Shop
Test Standards:
MIL-STD-461 CS101
Applications:
Conducted immunity and susceptibility, EMC precertification testing
Frequency Range:
30 Hz to 150 kHz (Extendable down to 2 Hz and up to 500 kHz)
Test Setup:
Quick Start Guide Provided
Shipping:
Same Day, Larger Systems go Freight

Related EMC Equipment & Solutions

Em Test CWS 500N3 Test Generator for Mil-STD-461, ISO 11452 and More

Em Test CWS 500N3 Test Generator for Mil-STD-461, ISO 11452 and More

SKU: sku-253

Weight: Approx. 36kg
Amplifiers: low-frequency signal source with amplifier
Dimensions: 19"/6HU (555mm x 448mm x 286mm)
Frequency range: 10Hz - 250kHz
General Data: Technical Details
Harmonic Distortion (THD): less than -20dBc at 100W power 0.5ohm
Operating Temperature: 10°C - 40°C
Signal current: Max. 15A rms
Signal level: 0.001V - max. 7Vrms (14Vrms)
Signal power: 100W (nominal)
Supply Voltage: 115V or 230V +10/-15%, 50/60Hz
View Product Cart
Side A - Schwarzbeck NNBL 8226 MIL-STD-461 LISN

Schwarzbeck NNBL 8226 MIL-STD-461 LISN

SKU: 6862

Frequency Range: 9 kHz - 100 MHz
Max. cont. current: 70 A
Max. current (limited time): 100 A
Max Voltage (DC): 500 V
Max. Voltage (AC 50/60 Hz): 250 V
Max. Voltage (AC 400 Hz): 140 V
Impedance: (50μH + 5 Ω) || 50 Ω (+/- 20 %)
DC-Resitance mains-EuT: ca. 10 mΩ
EUT Connectors: Wing terminals
$1,300.00
In Stock
Simple conducted emissions setup for single phase electronics

Conducted Emissions Test Setup

SKU: 7077

Test Standards: IEC 61000-4-7, IEC 61000-4-30, IEC-61000-4-19, CISPR 11, CISPR 25, CISPR 32, FCC Part 15, MIL-STD 461, ANSI C63.4, DO-160 and more
Measurement Range: 1 kHz - 1 GHz (150 kHz - 30 MHz typical)
Power Handling: up to 1,000 Volts and 1,000 Amps
OEM Measurement Receivers Available: Rohde & Schwarz, Keysight, Siglent, Rigol, PMM, Amplifier Research, Frankonia
OEM LISN's Available: Schwarzbeck, FCC, Com-Power, Solar Electronics, PMM, Tekbox, Agilent/HP
Generic Standards: IEC 61000-6-3, IEC 61000-6-4
$590.00
In Stock
Ordering Options

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form