Overview
The Tekbox TBMR-110M EMI Analyzer is designed to perform conducted emission measurements from 1 Hz to 110 MHz, supporting EMC standards and EMC precompliance testing. It provides engineers, test labs, and importers with an affordable and versatile solution for verifying that the EUT’s electromagnetic emissions remain within specified limits. Its intuitive operation and high-accuracy performance make it ideal for both development and verification stages, eliminating the need to outsource basic EMC measurements.
EMI Analyzer 1 Hz – 110 MHz (Measurement Receiver)
- – 162 dBm/Hz noise floor down to 1 kHz
- 7-band hardware pre-selector filter bank
- 30 dBm maximum input power
- CISPR-16, ANSI and MIL-STD compliant detectors
- Peak, Quasi-Peak, Average, CISPR-Average, RMS and CISPR-RMS detectors working in parallel.
- Sweep, STFFT and direct parallel resolution bandwidth setting (-3 dB and -6dB)
- Numerous predefined Standards, ready to load and use
- Pre-measurement with selective Peak measurement
- Direct fast compliant STFFT measurement
- Many pre-defined transducers, antenna factors and various other compensation files
- Many data manipulation, display and documentation features
- Direct control from EMCView or standalone operation
- Quick load of predefined setups
Spectrum Analyzer
- 1 Hz – 110 MHz measurement range
- Tracking Generator
- 0.1 Hz to 3.5 MHz arbitrary RBW and VBW setting
- Zero Span operation with time domain triggering
- Linear, log amplitude and frequency display
- Sweep, STFFT and direct parallel resolution bandwidth setting
- Parallel RMS, Pos./Neg. peak and average detector
- Trace Memory option, normalization
- Equation based trace display
- Peak hold
- Noise marker, max and band power display
- Quick load of predefined setups
Tracking Analyzer 1 Hz – 110 MHz
- Linear and logarithmic sweep
- -50 dBm to 0 dBm adjustable TG power
- 120 dB dynamic range
- Use of power correction file and level correction file
- Quick load of predefined setups.
Noise Analyzer 1 Hz – 110 MHz
- Measurement of absolute RMS noise power or voltage spectral density
- Noise figure measurement
- Noise can be referenced to the input or output of devices under test
Mains harmonics analyzer
- Mains harmonics measurement according to EN 61000-3-2
- requires external current coupler (e.g. TBMHA1) and clean AC supply
Oscilloscope 250 MS/s, DC – 110 MHz
- 1 ns/DIV to 1 s/DIV horizontal resolution
- Interpolated sampling up to 4 GS/s
- Real-time Sampling up to 250 MS/s, 14 Bit
- Up to 16 MS sampling size
- Various Trigger options
- Vertical CIC Filter option for noise reduction
- Many automatic measurement features
Demodulator
- Direct demodulation into the PC sound system
- FM, AM and SSB demodulator
- Adjustable bandwidth, center frequency and demodulator parameters
- Automatic demodulation parameter measurements
IQ Stream Generator
- GNU-Radio data source
- Directly stream floating point I and Q data into file or network
- Adjustable center frequency and bandwidth
Remote Control
- Direct remote control of the EMI Analyzer over network
- Text based protocol
- EMCview compatible
Accessories:
The Tekbox TBMR-110M comes with:
- 1x type-A to type-B USD cable
- 1x country specific IEC power cord
- 1x TBFL1 combined attenuator
- EMCview software
