A.R. 500A100A Solid State RF Amplifier, 500 Watts CW, 10 kHz - 100 MHz

Condition:
Used
Weight:
150 lbs
Dimensions:
19.8 x 16.8 x 21.7 in
Flatness:
.± 1.5 dB maximum ± 0.5 dB with internal leveling
Frequency Range:
10 kHz - 100 MHz
Gain:
GAIN (at maximum setting).........57 dB minimum GAIN ADJUSTMENT (continuous range)....25 dB minimum
Impedance:
50 ohms
Input:
180 - 264 VAC 47 - 440 Hz, 2000 watts maximum @ 0.99 P.F. typical
Output:
POWER OUTPUT, CW Nominal .... 617 watts Minimum...... 500 watts Linear @ 1 dB compression .. 300 watts minimum
RF Connector:
Type N female
RF Input Voltage:
1.0 milliwatt maximum for rated output
Manufacturer:
Amplifier Research
Online Orders Ship Same Day

 

Availability:

Inquire for Availability

SKU:
sku-775

 

This product is available for shipping to North America and Western European countries.


Getting Started...

Check out our Google Reviews

Overview

The Amplifier Research 500A100A is a self-contained, air-cooled, broadband, completely solid state amplifier designed for applications where instantaneous bandwidth and high gain are required. This unit is ideal for MIL-STD-461 RS103 low band E-field immunity testing. Push-pull MOSFET circuitry is utilized in all high power stages in the interest of lowering distortion and improving stability. The Model 500A100A, when used with an RF sweep generator, will provide a minimum of 500 watts of swept power.

The Model 500A100A is equipped with a Digital Control Panel (DCP) which provides both local and remote control of the amplifier. The DCP uses a 4-line vacuum fluorescent display, menu assigned softkeys, a single rotary knob, and four dedicated switches (POWER, STANDBY, OPERATE and FAULT/RESET) to offer extensive control and status reporting capability. The display provides operational presentation of Forward Power and Reflected Power plus control status and reports of internal amplifier status. Special features include a gain control, internal/external automatic level control (ALC) with front panel control of the ALC threshold, pulse input capability and RF output level protection. Also included is an internal RF detector that provides an output for use in self-testing or operational modes. All amplifier control functions and status indications are available remotely in GPIB / IEEE-488 and RS-232 format. The buss interface connector is located on the back panel and positive control of local or remote operation is assured by a keylock on the front panel of the amplifier. High efficiency universal input, power factor corrected switching power supplies provides DC to all internal subassemblies. Housed in a stylish, contemporary enclosure, the Model 500A100A provides readily available RF power for typical applications such as RF susceptibility testing, antenna and component testing, watt meter calibration, particle accelerators, plasma generation, communications and use as a driver for higher power amplifiers.

[split]

A.R. 500A100A Solid State RF Amplifier, 500 Watts CW, 10 kHz - 100 MHz

Key Considerations

Manufacturer:
Amplifier Research
Weight:
150 lbs
Dimensions:
19.8 x 16.8 x 21.7 in
Flatness:
.± 1.5 dB maximum ± 0.5 dB with internal leveling
Frequency Range:
10 kHz - 100 MHz
Gain:
GAIN (at maximum setting).........57 dB minimum GAIN ADJUSTMENT (continuous range)....25 dB minimum
Impedance:
50 ohms
Input:
180 - 264 VAC 47 - 440 Hz, 2000 watts maximum @ 0.99 P.F. typical
Output:
POWER OUTPUT, CW Nominal .... 617 watts Minimum...... 500 watts Linear @ 1 dB compression .. 300 watts minimum
RF Connector:
Type N female
RF Input Voltage:
1.0 milliwatt maximum for rated output

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.