AH Systems SAS-550-1B MIL-STD Active Monopole 9 KHz - 60 MHz

AH Systems SAS-550-1B MIL-STD Active Monopole 9 KHz - 60 MHz

Condition:
Used
Antenna Factor (1 Meter):
0 dB/m
Antennas:
Monopole Antennas
Application/Test Type:
Active, general-purpose, receive-only antenna for FCC, MIL-STD and TEMPEST tests
Connector:
BNC (female)
Frequency Range:
9 kHz to 60 MHz
Impedance:
50 Ohms
Mounting Base:
1/4" 20 thread
Standards Met:
Mil-STD-461
Manufacturer:
AH Systems
Online Orders Ship Same Day
$195.00

 

SKU:
10233
Availability:

Typically In Stock

Getting Started...

Overview

The AH Systems SAS-550-1B MIL-STD Active Monopole 9 KHz - 60 MHz is an active, general-purpose, receive-only antenna that covers 9 KHz - 60 MHz frequency range. It is ideal for instantaneous bandwidth scanning (without tuning) of electric fields in its frequency range and can drive any receiver with 50-ohm input impedance. This antenna is an ideal solution to perform FCC, MIL-STD and TEMPEST tests.

The AH Systems SAS-550-1B MIL-STD Active Monopole 9 KHz - 60 MHz comes with a telescoping rod, ground plane, high impedance matched preamplifier and battery charger. This active monopole 104cm rod antenna has a signal output connector is electrically bonded to the matching network case per MIL-STD 461F

AH Systems SAS-550-1B Features:

  • Frequency Range of 9 KHz to 60 MHz
  • Individually Calibrated (Calibration included per ARP-958)
  • Ideal for MIL-STD 461F
  • High Sensitivity
  • Battery Pack and Charger

Key Considerations

Manufacturer:
AH Systems
Antenna Factor (1 Meter):
0 dB/m
Antennas:
Monopole Antennas
Application/Test Type:
Active, general-purpose, receive-only antenna for FCC, MIL-STD and TEMPEST tests
Connector:
BNC (female)
Frequency Range:
9 kHz to 60 MHz
Impedance:
50 Ohms
Mounting Base:
1/4" 20 thread
Standards Met:
Mil-STD-461

Related EMC Equipment & Solutions

EPT EMC Plastic Table

EPT-0.8 EMC Plastic Table

SKU: EPT-0.8

Dimensions: 31.4 in/0.8 m (D) x 31.4 in/0.8 m (H)
Load capability: Up to 220 Lbs
Material structure: Rohacell
Dielectric constant e at 1 MHz: 1.05
Material table top (removable) with a grid of 100 mm x 100 mm (3.9x 3.9 in): Pertinax t = 2 mm (0.07 in)
Temperature working range: 10°C – 35°C
Total weight: 15.5 lbs (7 kg)
Standards Met: CISPR 25, MIL-STD-461
Additional Standards Met: DO-160, ISO 10605
Additional Applications: Radiated Emissions, Radiated Immunity
Inquire for Availability
View Product View Product
Schwarzbeck MDS 21 CISPR 16 Absorbing Clamp

Schwarzbeck MDS 21 CISPR 16 Absorbing Clamp

SKU: 11781

Max Cable Diameter: 20mm
Max Current Handling: 30 Amps
Max RF Power Handling: 5 Watts
Frequency Range: 30 MHz - 1 GHz
Test Standards: CISPR 16
Cost New:
$4,950.00
Was:
$4,950.00
$3,500.00
In Stock
Rent Radiated Emissions Test Equipment System

Radiated Emissions Test Equipment System

SKU: 12013

Technical Support: FCC and iNarte Technicians
Test Setup: Quick Start Guide Provided
Shipping: Same Day, Larger Systems go Freight
Frequency Ranges: 2 Hz - 44 GHz
Test Limits: Pre-programmed Per Customer Requirements
Generic Standards: IEC 61000-6-3, IEC 61000-6-4
$795.00
Usually ships in 24 hours.
Ordering Options

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form