MIL-STD-461 CE101

MIL-STD-461 CE101 Test Equipment, Systems & Solutions

• 

  RESA Realtime EMC Spectrum Analyzer

  SKU: 2075

  Frequency Range: 9 kHz - 3.2/7.5.13.2/26.5 GHz

  Frequency Resolusion: 1 Hz

  Real Time Bandwidth: 25 MHz (40 MHz Optional)

  Range: 0 Hz (Zero Span), 100 Hz to Max Frequency

  EMI bandwidth (-6dB): 200 Hz, 9 kHz, 120 kHz, 1 MHz (in accordance to CISPR 16-1-1)

  Detectors: Peak, Voltage Average, Quasi-Peak (following CISPR 16-1-1)

  Applications: Conducted Emissions, Radiated Emissions, Spectrum Analyzers for EMC

  Pre-programmed Test Limits: FCC Part 15, CISPR 22, MIL-STD-461

  In Stock

  VIEW PRODUCT Cart

• 

  Rent Keysight N9048B CISPR 16 EMI Receiver

  SKU: 22153

  Frequency Range: 1 Hz to 26.5 GHz

  Standards Met: CISPR 16-1-1, ANSI C63.2, FCC

  Calibration: Accredited ISO 17025

  Options: See "Installed Options"

  Applications: Conducted Emissions, Radiated Emissions,

  Technical Note: Differences Between EMI Test Receivers and Spectrum Analyzers

  IN STOCK

  VIEW PRODUCT Cart

• 

  Conducted Emissions Test Setup

  SKU: 7077

  Applications: Conducted emissions testing on power and data lines, CE Marking

  Test Standards: IEC 61000-4-7, IEC 61000-4-30, IEC-61000-4-19, CISPR 11, CISPR 25, CISPR 32, FCC Part 15, MIL-STD 461, ANSI C63.4, DO-160 and more

  Measurement Range: 1 kHz - 1 GHz (150 kHz - 30 MHz typical)

  Power Handling: up to 1,000 Volts and 1,000 Amps

  OEM Measurement Receivers Available: Rohde & Schwarz, Keysight, Siglent, Rigol, PMM, Amplifier Research, Frankonia

  OEM LISN's Available: Schwarzbeck, FCC, Com-Power, Solar Electronics, PMM, Tekbox, Agilent/HP

  Generic Standards: IEC 61000-6-3, IEC 61000-6-4

  Cost New:

  Was:

  Price Now:

  $590.00 - $14,950.00

  In Stock

  ORDERING OPTIONS

• 

  Rohde & Schwarz ESW44 EMI Test Receiver for CISPR16-1-1, 1 Hz to 44 GHz

  SKU: 6113

  Frequency Range: 2 Hz to 44 GHz

  Standards Met: CISPR 16-1-1, ANSI C63.2, FCC

  Calibration: Accredited ISO 17025

  Options: B4, B21 or B8E, B21, B24

  Applications: Differences Between EMI Test Receivers and Spectrum Analyzers

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Rohde & Schwarz (R&S) RTE1204 Digital Oscilloscope, 2 GHz, 4 channels, 5 Gsample/s, 10/40 Msample

  SKU: 30048

  Bandwidth: 2 GHz

  Realtime sampling rate: max. 5 Gsample/s on each channel

  Trigger types: edge, glitch, width, runt, window, timeout, interval, slew rate, data2clock, pattern, state, serial pattern, TV/video, serial bus trigger (optional)

  Channels: 4

  Applications: How to Capture an Electrical Transient Using an Oscilloscope, EMC Precompliance Testing

  Cost New:

  Was:

  Price Now:

  $950.00

  Inquire for Availability

  ORDERING OPTIONS

• 

  Rohde & Schwarz ESRP7 EMI Test Receiver per CISPR 16-1-1

  SKU: 22721

  Frequency Range: 9 kHz to 7 GHz

  SSB Phase Noise: –90 dBc (1 Hz) (typ.)

  Frequency Response: 100 kHz ≤ f ≤ 7 GHz, < 3 dB

  Dynamic Range: 110 dB

  RF Output Connector: N Type Female, 50 Ω

  VSWR: 1.3, nominal

  Applications: Differences Between EMI Test Receivers and Spectrum Analyzers

  EMC Standards: CISPR 16-1-1, ANSI C63.2, MIL‑STD‑461 and FCC

  CALL FOR LEAD TIME

  VIEW PRODUCT Cart

• 

  RFCP-CAL RF Current Monitoring Probe Calibration Fixture

  SKU: 8939

  Applications: RF Current Monitoring

  Test Standards: IEC 61000-4-6 BCI, MIL-STD-461 CE101

  Compatible Probe: RFCP1G1K

  In Stock

  VIEW PRODUCT Cart

• 

  Amplifier Research DER2018 EMI Test Receiver

  SKU: 18326

  Frequency Range: 20 Hz to 18 GHz

  Standards Met: FCC Part 15, CISPR 22, MIL-STD-461

  Application/Test Type: Differences Between EMI Test Receivers and Spectrum Analyzers

  Cost New:

  Was:

  Price Now:

  $1,975.00 - $29,500.00

  Typically In Stock

  ORDERING OPTIONS

• 

  Rohde & Schwarz ESRP3 EMI Test Receiver per CISPR 16-1-1

  SKU: 11695

  Frequency Range: 9 kHz to 3.6 GHz

  SSB Phase Noise: –90 dBc (1 Hz) (typ.)

  Frequency Response: 9 kHz ≤ f < 100 kHz < 4 dB

  Dynamic Range: RBW = 1 kHz, f > 10 MHz 110 dB

  Harmonics, nonharmonic spurious: output level = –10 dBm –30 dBc

  RF Output Connector: N female, 50 Ω

  Applications: Differences Between EMI Test Receivers and Spectrum Analyzers

  Test Standards: CISPR 16-1-1, ANSI C63.2, MIL‑STD‑461 and FCC

  Inquire

  VIEW PRODUCT Cart

• 

  MFG-1000 Magnetic Field Generator & Ripple Current Tester

  SKU: 11959

  Field Strength Range: 1000 A/m up to 1000 Hz

  Frequency Rnange: DC to 250 kHz

  Test Standards: STD-461 (CE101, CS101, CS109), EN 61000-4-16, IEC / EN 61543

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Rent Rohde & Schwarz ESU40 EMI Test Receiver for CISPR and MIL-STD Testing

  SKU: 30082

  Frequency Range: 20 Hz to 40 GHz (DC coupled), 10 MHz to 40 GHz (AC coupled)

  Frequency Resolution: 0.01 Hz

  Frequency Counter Resolution: 0.1 Hz to 10 kHz

  Test Standards: CISPR 16-1-1, MIL-STD-461

  Applications: Conducted Emissions, Radiated Emissions

  Inquire for Lead Time

  VIEW PRODUCT Cart