ANSI/IEEE Standards Categories
ANSI/IEEE Standards
-
FCC-LISN-50-50-4-02 Line Impedance Stabilization Network
SKU: 12364-1
EUT Current Handling: 32 AmpsEUT Voltage Handling: 540V/260VApplications: CE Marking, Medical Devices, Industrial Machinery, Electronics & ITServices Available: ISO 17025 Calibration, Rentals, Leases, Purchases, Repairs, Eval/CharacterizationTest Standards: ISO 60601-1-2, FCC Part 15Inquire for Availability -
Thermo Keytek E510A 10kV Surge Generator
SKU: 10799
Standards Met: ANSI/IEEE C62.41 Cat. B and IEC 61000 4-5Phase synchronization: ±15° with optional coupler/decouplerPulse current (short circuit): 8/20µs, 0-5.05kA with 2 ohm effective source impedance, ±10%Pulse repetition: 1 shot/18 secondsPulse voltage (open circuit): 1.2/50µs, 0-10.1kV ±10% in 1 volt stepsTypically In Stock -
Thermo Keytek ECAT Transient Generator System
SKU: 11321
Pulse current (short circuit): Selectable at 200A max. or 500A max., when the open-circuit voltage is set to 6.0kV.Pulse repetition: 1 shot/9 secondsPulse voltage (open circuit): 200V - 6.6kV ± 10%Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41Standards Met: ANSI/IEEE C62.41 Cat. A and B, and various UL standards, including UL 864In Stock -
3ctest CWS 800 8kV Surge Combination Wave Simulator for IEC/EN 61000-4-5 up to 8 kV
SKU: sku-797
Weight: Approx 30 kg (66 lbs)Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5Coupling: Single Phase Built in, 16A, 250VAC, 120VDCDimensions: 19 inch/6uImpedance: 2 Ohm -
ETS-Lindgren 3142D Biconilog Antenna, 26 - 6000 MHz
SKU: 2841
Standards: IEC 61000-4-3,FMC 1278, GMW3097Antenna Factor (1 Meter): -23 to 8 dBiApplication/Test Type: RF EMC immunity testingConnector: N type femaleDimensions: 52.7 in. (133.9 cm) x 66.2 in (168.1 cm) x 30 in (76.2 cm)Inquire For Lead Time -
Rent Com-Power LI-3P-132 150kHz to 30MHz Three-Phase Line Impedance Stabilization Network
SKU: 11124
Weight: 27.5 lbs.Application/Test Type: Power Line Conducted Emissions TestsCurrent Rating: 32 AmperesDimensions: 19.3” x 13.9” x 2.3"Frequency Range: 150 kHz to 30 MHzInquire for Availability -
Frankonia Core-6 EMI Receiver 9 kHz–6 GHz
SKU: 52535
Frequency ranges: 9 kHz – 30 MHz and 30 MHz – 6 GHzFully compliant: acc. to CISPR 16-1-1Fast measurements: by new digital designIntegrated: 20dB pre-amplifierIntegrated pulse limiter: Up to 30 MHzIn Stock -
Com-Power LI-3P-132 150kHz to 30MHz Three-Phase Line Impedance Stabilization Network
SKU: sku-598
Weight: 30 lbs.Application/Test Type: Power Line Conducted Emissions TestsCurrent Rating: 32 AmperesFrequency Range: 150 kHz to 30 MHzInductors: 50 µH$450.00 -
PMM L3-64 3-Phase, 64 Amp LISN for FCC Part 15
SKU: 10057
Weight: 50 kg (110 pounds)Application/Test Type: Ancillary device intended for repeatable and accurate measurement of the disturbance voltage that an EUT (Equipment Under Test) may inject into the power line or mains.Current Rating: 63 Amps MaxDimensions: 465 x 450 x 740 mm (18 x 17.7 x 29 inches)Frequency Range: 9 kHz to 30 MHz -
3ctest CWS 1000N 10kV Surge Generator for IEC/EN 61000-4-5
SKU: sku-798
Weight: Approx 44 kg (97 lbs)Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5Dimensions: 19 inch/6uImpedance: 2 OhmPhase synchronization: 0°-360°, 1°step or random -
Rent Rohde & Schwarz ESU40 EMI Test Receiver for CISPR and MIL-STD Testing
SKU: 30082
Frequency Range: 20 Hz to 40 GHz (DC coupled), 10 MHz to 40 GHz (AC coupled)Frequency Resolution: 0.01 HzFrequency Counter Resolution: 0.1 Hz to 10 kHzTest Standards: CISPR 16-1-1, MIL-STD-461Applications: Conducted Emissions, Radiated EmissionsInquire for Lead Time -
EM Test EFT 500N5 Electrical Fast Transient/EFT/Burst Simulator
SKU: 10693
Test Capabilities: EFT ImmunityStandards Met: IEC/EN 61000-4-4Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & ITMax EUT AC Voltage (w/ Built in CDN): 250 VoltsMax EUT AC Current (w/ Built in CDN): 32 AmpsINQUIRE