Standards - ANSI/IEEE Standards - Page 2

ANSI/IEEE Standards

(Showing 12 of 54)

The American National Standards Institute (ANSI) is a private non-profit organization that oversees the development of voluntary consensus standards for products, services, processes, systems, and personnel in the United States.

IEEE is an organization composed of engineers, scientists, and students. The IEEE is best known for developing standards for the computer and electronics industry.

ANSI/IEEE Standards Categories

ANSI/IEEE Standards Test Equipment, Systems & Solutions

Haefely PIM 110 Ring Wave Generator

SKU: 10544

Impedance: 12, 30 & 200 Ohms

Applications: Surge Immunity Testing

Ring Wave: 0.5us - 100kHz (voltage & current)

Pulse repetition: 12 per minute

Pulse Voltage: 0.20 – 7.8kV

Compliance Standards: IEC/EN 61000-4-12 and ANSI (IEEE) C62.41

Test duration: 5 seconds

Test Equipment Group: Ring Wave Generators/Simulators

Cost New:

Was:

Price Now:

$995.00 - $1,795.00

In Stock

Ordering Options
Haefely PIM 150 Oscillating Wave Surge Generator

SKU: 10526

Burst frequency: 100 kHz & 1 MHz

Coupling: Single & Multiple Path

Mains & EUT Connections: HV connector & CDN

Source Impedance: 200 ohms

Standards Met: IEC 61000-4-18 Power & Data lines; ANSI C37.90.1, IEC 60255-22-1, IEEE 1613

In Stock

View Product
Rent Solar 9247-50-TS-50-N LISN for CISPR 16-1, FCC Part 15, ANSI C63.4

SKU: sku-302

Application/Test Type: Power line conducted emissions tests

Current Rating: 50 Amps

Frequency Range: 10 kHz to 50 MHz

Inductors: 50 µH (0.10 µF Coupling Capacitor)

Mains & EUT Connections: Terminal Screw

RF Connector: 50Ω N-type (female)

Standards Met: FCC Part 15, CISPR 16-1, ANSI C63.4 (1992)

Voltage Rating: 500 VAC (Line to Ground), 800 VDC

View Product
Keysight (Agilent) N9038A-526 MXE EMI Receiver, 3 Hz to 26.5 GHz

SKU: 10259

Frequency Range: 20 Hz - 26.5 GHz

Resolution: 2 Hz

Bandwidth accuracy (–3.01 dB): 1 Hz to 1.3 MHz ± 2 % (nominal)

Dynamic Range: > 70 dB

Amplitude Accuracy: < ± 2.7 dB

EMC Standards: CISPR 11, CISPR 22, ANSI C63.2

Applications: Differences Between EMI Test Receivers and Spectrum Analyzers

Typically In Stock

View Product
Com-Power LIN-120A LISN for CISPR 16-1-2/ANSI C63.4 w/ built-in Transient Limiter

SKU: sku-15

Weight: 10 lbs (4.5 kg)

Application/Test Type: Power line conducted emissions tests

Current Rating: 20 Amps AC (rms) , 14 Amps DC

Dimensions: 6.6” x 14.3” x 13” (16.8 x 36.3 x 33 cm)

Frequency Range: 150 kHz to 30 MHz

Inductors: 50 µH (air-core)

Insertion Loss: 0.5 dB (150 kHz to 30 MHz)

Isolation: 40 dB (150 kHz to 30 MHz)

Mains & EUT Connections: IEC 60320 @Mains and NEMA 5-15R @EUT

RF Connector: 50Ω N-type (female)

Standards Met: CISPR 16-1-2, ANSI C63.4

Voltage Rating: 270 VAC (Line to Ground), 380 VDC

View Product
RESA7G Realtime EMI Measurement Analyzer

SKU: 2075-1

Applications: Conducted Emissions, Radiated Emissions, Spectrum Analyzers for EMC

Pre-programmed Test Limits: FCC Part 15, CISPR 22, MIL-STD-461

Frequency Range: 9 kHz - 7 GHz

Sweep/Test Speed: Fast

Amplitude Accuracy: <0.7 dB

Resolution Bandwidth: 1 Hz to 3 MHz

Cost New:

Was:

Price Now:

$695.00 - $1,395.00

In Stock

Ordering Options
ETS-Lindgren 3142E Biconilog Antenna, 30 MHz - 6 GHz

SKU: 10814

Standards: IEC 61000-4-3, FMC 1278, GMW3097

Gain: -23 to 8 dBi

Application/Test Type: RF EMC immunity testing

Frequency Range: 30 MHz - 6 GHz

Maximum Continuous Power: 500 Watts

Typically In Stock

View Product
AH18G Active Horn Antenna for Radiated Emissions to 18 GHz

SKU: 2363

Applications: Radiated Emissions, Military & Aviation EMC Testing

Test Standards: FCC Part 15, MIL-STD-461

Gain: 30 dB

Max Input Power: -10 dBm (97 dBµV)

Power: Battery Operated & USB Charger

Connector: N-type (to Analyzer/Receiver)

Cost New:

Was:

Price Now:

$695.00 - $8,975.00

IN STOCK

Ordering Options
LISN-AC-CISPR16-10 Line Impedance Stabilization Network

SKU: 8666

EUT Current Handling: 10 Amps

EUT Voltage Handling: 250 Volts

Inductance: 50 uH (w/ 250 µH Choke)

Applications: Conducted Emissions Testing, CE Marking

Additional Test Standards: CISPR 16-1-2, FCC Part 15, ANSI C63.4

Features: DC Capable, Artificial Hand, Simultaneous Line Monitoring

IN STOCK

View Product
3ctest RWS 600 Ring Wave Generator for IEC 61000-4-12

SKU: 10595

Display Interface: 5.7 inch TFT touch screen

Phase synchronization: 0°-360°, 1° step or random

Polarity: Positive. negative, alternating

Pulse current (short circuit): 500A ± 10% at 12Ω; 200A ± 10% at 30Ω

Pulse voltage (open circuit): 0.25 kV–6.0kV ± 10%

Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41

Test duration: 1s-99s

Applications: Surge Immunity Testing

4-6 Weeks

View Product
ETS-Lindgren 3149 Hybrid Log Periodic and Biconical

SKU: 5890

Standards: IEC 61000-4-3, FMC 1278, GMW3097

Gain: -5 to 9 dBi

Application/Test Type: RF EMC immunity testing

Frequency Range: 80 MHz - 6 GHz

Maximum Continuous Power: 750 Watts

Typically In Stock

View Product
Haefely FP-SURGE 100M 100 Amp Surge Immunity System

SKU: 8061

Test Capabilities: Combination Wave Surge Immunity

Standards Met: IEC/EN 61000-4-5 ANSI standards C62.41 and C62.45

Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

Max EUT AC Voltage: 690 Volts

Max EUT Current: 100 Amps

Impulse Voltage: 8 kV

Impulse Current: 4 kA

RENTAL ONLY

View Product

ANSI/IEEE Standards

ANSI/IEEE Standards Categories

ANSI/IEEE Standards Test Equipment, Systems & Solutions

Connect with The EMC Shop