Categories
Test Equipment, Systems & Solutions
-
Schwarzbeck NNHV 8123-200 CISPR25 Artificial Mains Network (AMN)
SKU: 21156
Applications: Conducted Emissions, BCI Testing , Automotive EV EMCTest Standards: CISPR 25, MIL-STD-461, ISO 7637Max EUT DC Voltage: 1,000 VoltsMax EUT Current: 200 AmpsMax EUT AC Voltage (60Hz/400Hz): 400V/300VInductance: 5 µHTypically In Stock -
IFI M50 10 kHz to 230 MHz, 50 Watt CW RF Amplifier
SKU: sku-831
Max Frequency: 220 MHzMin Frequency: 10 kHzOutput Power: 50 WattsApplications: RF Conducted Immunity, MedicalStandards: IEC 61000-4-6, MIL-STD 461 CS114AC Input Power: 100-240V/1PH/500VAGain: 47dB -
3ctest CWS 1000N 10kV Surge Generator for IEC/EN 61000-4-5
SKU: sku-798
Weight: Approx 44 kg (97 lbs)Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5Dimensions: 19 inch/6uImpedance: 2 OhmPhase synchronization: 0°-360°, 1°step or randomPolarity: Positive, Negative, AlternatePulse current (short circuit): 0.1kA-5kA ±10%Pulse voltage (open circuit): 0.2kV - 10kV ±10%Standards Met: IEC 61000-4-5 -
3ctest SEPN Series CDN's for Surge & Burst, Single Phase 3-wire, Three Phase 5-wire
SKU: sku-561
Polarity: +/-Weight: approx. 50KgBurst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4Burst frequency: 0.1kHz–1000kHzCombination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5Dimensions: 19 inch/6UImpedance: 2 ohm (output)Oscillation Frequency: Current waveform: Front time: 8us±20%, time to half value: 20us±20%Polarity-2: +/-/alternativePulse amplitude: 0.25 kV -4.8kV, ± 10%Pulse current (short circuit): 0.1kA–3kA，±10%Voltage: 0.2kV–6kV，±10% -
Rent Rohde & Schwarz ESU40 EMI Test Receiver for CISPR and MIL-STD Testing
SKU: 30082
Frequency Range: 20 Hz to 40 GHz (DC coupled), 10 MHz to 40 GHz (AC coupled)Frequency Resolution: 0.01 HzFrequency Counter Resolution: 0.1 Hz to 10 kHzTest Standards: CISPR 16-1-1, MIL-STD-461Applications: Conducted Emissions, Radiated EmissionsInquire for Lead Time -
Teseq ISN S501A Impedance Stabilization Network for Coaxial Lines
SKU: sku-171
Weight: approx. 1.5 kgDimensions: (W x H x D): 100 mm x 100 mm x 240 mmFrequency Range: 150 kHz to 230 MHzImpedance: 150 Ω ±20 ΩRF Input Voltage: 20 V -
TWT18G-250 8 GHz - 18 GHz, 250 Watt RF CW Amplifier
SKU: sku-2218
Weight: 75 lbsDimensions: 19W x 25D x 8.75HFrequency range: 8.0 – 18.0 GHzGain: 54 dBRated Power: 250 watts -
Schwarzbeck ISN S8 Impedance Stabilization Network
SKU: 8857
Connector to EUT: RJ45 connector | CAT 6 CableMax Voltage Handling: 150 VDC | 100 VACMax Current Handling: 1 AmpApplication: Shielded Data Lines Conducted Emissions Measurements$1,800.00In Stock -
PLA1M Passive Shielded Loop Antenna, 20 Hz - 1 MHz
SKU: sku-2109
Weight: 2.5 LBsDiameter: 22 3/8"Frequency Range: 20 Hz to 1 MHzRF Connector: BNC, Female$1,895.00 -
Schwarzbeck FSH3D Isotropic 3-Axial RX Loop Antenna
SKU: FSH3D
Frequency Range: 9 kHz - 200 MHz (nominal)Connector: N-female 50 ΩPower Supply: 5 V DC < 100 mAPower Supply and Logical Connector: Binder 99-0421-10-07 Serie 712VSWR: typ. < 1.5 (20 kHz - 50 MHz)Inquire for Availability -
Teseq ISN S502A Impedance Stabilization Network for Coaxial Lines
SKU: sku-172
Weight: approx. 1.5 kgDimensions: (W x H x D): 100 mm x 100 mm x 240 mmFrequency Range: 150 kHz to 230 MHzImpedance: 150 Ω ±20 ΩRF Input Voltage: 20 V -
Typically In Stock