Categories
-
Rohde & Schwarz SMB100A RF and Microwave Signal Generator
SKU: 8230
Frequency Range: 9 kHz to 6 GHzOptions: SMB-B1H, SMB-B103, SMB-K21, SMB-K22AC Input Voltage Range: 90 V to 264 VMax Input Current: 1.4 A (100 V) to 0.6 A (240 V)$755.00 - $1,095.00In Stock -
Sonoma 330 Broadband RF Amplifier
SKU: 6461
Weight: 3.3 lbsApplication/Test Type: Increases system sensitivity enhancing the capability of measurement system to measure low level signals.connectors: BNC or Type NDimensions: 3.6 x 4.3 x 7.2 inFrequency range: 10 kHz - 2.5 GHz$2,950.00In Stock -
Attenuator Set for IEC/EN 61000-4-6 Conducted RF Immunity
SKU: 11584
Power Handling: up to 500 WattsAttenuation: 3dB to 40dBConnectors: N-type typ. (BNC available)Frequency Range: DC to 1 GHz typ.VSWR: 1.2:1In Stock -
3ctest LDS 200 Automotive Load Dump Simulator
SKU: 6636
Applications: EMC Testing on EV Electric Vehicles Batteries & Charging Stations, Automotive Electrical DisturbancesDUT voltage: Max. 60VStandards Met: ISO 7637, ISO 16750-2, FMC1278, Many MorePower Input: AC 110/220V, 士10%,45-65HzDUT Max Current: 50 Amps$1,350.00 - $1,975.00IN STOCK -
EMIC-20 EM Injection Clamp for IEC/EN 61000-4-6 Immunity Test
SKU: 7851
Standards: EN/IEC 61000-4-6Application/Test Type: Injects the disturbance signal through a combination of inductive and capacitive couplingClamp factor (CF): -.5 dB at 100 kHz to -4 dB at 1 GHz (Min -7 dB at 700 MHzConnector: N-type femaleDimensions: 632 mm x 120 mm x 80 mm$595.00 - $8,500.00Typically In Stock -
ISO 11452-2 Full ALSE Test Setup
SKU: 10460
Frequency Range: 80 MHz - 18 GHzTest Severity Levels: 100 V/m Standard (up to 200 V/m Max)Applications: Radiated Immunity Testing, EV & Battery EMC TestingNormative References: ISO 11452-1Inquire for Availability -
ISO 11452-4 Level IV BCI Test System (200mA)
SKU: 10459
- Commonly used test systems for bulk current injection setup and test
- Precompliance EMC testing on automotive electrical components and assemblies accoring to ISO 11452-4
- Base package for Level 4, 200mA from 100 kHz to 400 MHz
- Expand systems to achieve up to 1000mA from 4 kHZ to 3 GHz
- ISO 17025 accredited calibrated systems available for test labs
$1,950.00 - $3,250.00Typically In Stock -
Com-Power Model AL-130R Active Loop Antenna 9 kHz - 30 MHz
SKU: 1879
Compliant Standards: CISPR 11, CISPR 16-1-4, CISPR 16-2-3, FCC 18 and othersAntenna Factor (1 Meter): E-Field Antenna Factors 13.4 to 16.4 (average: 14.9) [dB(m-1)] Antenna Factor Variation ±1.5 dBApplications: Radiated Emissions Measurements, Military & Aviation EMC TestingBattery: (preamplifier) 6 V DC NimH (rechargeable) Average Battery Life 10-12 hoursConnector: BNC-type(female)$460.00 - $4,600.00In Stock -
Teseq NSG 5500 Automotive Immunity Generator
SKU: 10257
Applications: Automotive Electrical Disturbances, EV EMC TestingTest Standards: ISO 7637Max EUT DC Voltage (w/ Built In CDN): 60 VoltsMax EUT DC Current (w/ Built In CDN): 30 AmpsPeak Inrush Current Capability: 300 AmpsInquire -
3ctest CCS 800 Conducted Immunity Test System
SKU: 10327-1
Built in CDN: 300 Volts/20 or 32 AmpsEFT/Burst Pulse Output Capability: 6 kVIEC-61000-4-5 Surge Immunity Test: 8 kV (1.2/50μs & 8/20μs)IEC-61000-4-5 Communication Wave Test: 8 kV (10/700& 5/320μs)Test Setup: Conducted Immunity/Susceptibility Test SetupInquire for Availability -
Tekbox TBVNA-6000 Vector Network Analyzer 0.1 Hz – 6 GHz
SKU: 251211-2
- 0.1 Hz – 6 GHz Vector Network Analyzer (0.001 Hz – 500 MHz Bode Analyzer Option)
- Signal generator 0.1 Hz – 6 GHz with 0.1 Hz resolution
- Four channel 60 MHz digital oscilloscope with 125 MS/s and 14 bit resolution. (Two 50 Ω inputs, two 1 MΩ inputs
- Two-Channel DC – 6 GHz spectrum analyzer, with an unambiguous frequency range of DC – 60 MHz and an active sideband suppression for spurious-free signal measurements up to 6 GHz (under certain conditions) and cross correlation option.
- Power sweep measurements, Wideband Power/Voltage measurements, THD analyzer, Phase noise analyzer
Inquire for Availability -
Langer EMV BD 11 H-Field Burst Detector
SKU: 251223
Optical fibre connector: 2.2 mm ØSupply voltage: 2 x 1,5V AAA batteryMax. switching voltage: 125 VMax. switching current: 1 AMax. optical fibre length: 20 mIn Stock