EMC Test Equipment

EMC Test Equipment Test Equipment, Systems & Solutions

• 

  FCC F-120-9A Bulk Current Injection Probe

  SKU: 8567

  Test Standards: IEC 61000-4-6

  Frequency Range: 10 kHz - 230 MHz

  Maximum Input Power: 125 Watts

  Aperture: 1.57"

  Applications: Bulk Current Injection BCI Testing, RF Conducted Immunity Testing

  Cost New:

  Was:

  Price Now:

  $595.00 - $1,195.00

  In Stock

  ORDERING OPTIONS

• 

  AH Systems SAS-540 Biconical Antenna, 20 MHz to 330 MHz, up to 2 V/m

  SKU: sku-674

  Weight: 3.8 lb.'s (1.72 kg)

  Antennas: Biconical Antennas

  Application/Test Type: Radiated emissions and immunity

  Connector: N-type (female)

  Dimensions: Height: 29 in. (73.7 cm) Width: 52.5 in. (133.4 cm)

  Frequency Range: 20 MHz - 330 MHz

  Gain: -22 to 2.8 dBi

  Impedance: 50 Ohms nominal

  Maximum Continuous Power: 1 Watts

  Mounting Base: ABC-B (included)

  VSWR: 2.0:1

  VIEW PRODUCT Cart

• 

  Teseq FT 801 Ferrit Tube EM Decoupling Clamp, 150 kHz to 1 GHz, 35 mm Cable Diameter

  SKU: sku-673

  Weight: approx. 8 kg

  Application/Test Type: decoupling network (ferrite tube) for immunity test according to IEC / EN 61000-4-6

  Dimensions: 670 mm x 70 mm x 80 mm

  Frequency Range: 150 kHz to 1000 MHz

  Max. Cable Diameter: 35 mm

  Standards Met: IEC/EN 61000-4-6 CISPR 24 EN 61000-6-1 EN 61000-6-2 IEC 60533 IEC 60601-1-2 IEC 61326

  VIEW PRODUCT Cart

• 

  Com-Power LI-3P-216 LISN, 9 kHz to 30 MHz, 50/250 uH, 500 VAC

  SKU: 11665

  Weight: 27.5 lbs.

  Application/Test Type: Power Line Conducted Emissions Tests

  Current Rating: 16 Amperes

  Dimensions: 19.3” x 13.9” x 2.3"

  Frequency Range: 9 kHz to 30 MHz

  Inductors: 50 µH

  Insertion loss: less than 0.7 dB

  Isolation: more than 40 dB

  Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack

  RF Connector: RF Measurement Port 50Ω - N-Type (female)

  Standards Met: ANSI C63.4, CISPR 16-1-2

  Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V

  Cost New:

  Was:

  Price Now:

  $5,795.00

  SHIPS IN 3-5 DAYS

  ORDERING OPTIONS

• 

  Empower Model 2175 RF Amplifier High Power CW, Modulated, & Pulse, 80 – 1000 MHz, 500 Watts

  SKU: 10654

  Weight: 68 LBs

  Dimensions: 17.5 x 5.25 x 22

  Frequency Range: 80 – 1000 MHz

  Gain: 60 dB min

  Impedance: 50 ohms nominal

  RF Connector: Type N female

  VIEW PRODUCT Cart

• 

  Amplifier Research FP7060 E-Field Probe Kit, 27 MHz – 60GHz, 0.7–300 V/m

  SKU: 11650

  Weight: 350g approx

  Application/Test Type: electric field measurement instrument for use in EMC and EMI applications

  Battery: 2 built-in NiMH batteries, size AA, rechargeable, changed by operator, 40 hours operating life per charge.

  Communication: 10 m glass cable

  Dimensions: Approx. 420 x 85 x 65 mm including base and probe

  Frequency Range: 27MHz–60GHz

  Measurement Mode: composite values

  Operation Time: 40 hours operating life per charge.

  Recharging Time: Standard recharger included, 3 hour charge time

  RF Field Probes: E-Field

  Sampling Rate: 60Hz, 50Hz, 5 Hz. - user selectable

  Sensors: Isotropic

  VIEW PRODUCT Cart

• 

  Amplifier Research 20S1G4 Solid State RF Amplifier

  SKU: sku-610

  Weight: 37 lbs

  Dimensions: 19.8 x 6.1 x 14.8 in

  Flatness: ± 1.5 dB

  Frequency Range: 0.7–4.2GHz instantaneously

  Gain: (at maximum setting) 43 dB minimum (Continuous Range) 10 dB minimum

  Harmonic Distortion (THD): Minus 20 dBc maximum at 15 watts

  Impedance: 50 ohms, VSWR 2.0:1 maximum

  Input: 90-132, 180-264 VAC 50/60 Hz, single phase 210 watts maximum

  Output: POWER OUTPUT @ 3dB COMPRESSION Nominal 25 watts Minimum 20 watts POWER OUTPUT @ 1dB COMPRESSION Nominal 22 watts Minimum 18 watts

  RF Connector: RF Connector Type N female REMOTE INTERFACES: IEEE-488-24 pin female RS-232-9 pin Subminiature D (female) RS-232 (fiber optic)-Type ST USB 2.0-Type B Ethernet-RJ-45

  RF Input Voltage: 1.0 milliwatt maximum for rated output

  Standards Met: CE Mark Testing

  Call for availability

  VIEW PRODUCT Cart

• 

  3ctest MFS Series Magnetic Field Simulator for IEC 61000-4-8

  SKU: sku-594

  Weight: Approx. 35Kg+68Kg

  Coil Factor: 1000 x 1000mm

  CRO Trigger: Automatic, manual or external signal trigger

  Dimensions: 19 inch/6U/4U

  Magnetic Field Strength: varies per coil: TCXS111 single turn1m*1m square coil: 1-100A/m continuous, 100-400A/m(1-10 short time) TCXS113three-turn 1m*1m square coil: 1-300A/m continuous, 300-1200A/m 1~10s short time

  Max input power: 100W

  Output Current: 50Hz/60Hz sine wave +/- 5%

  Repetition time: 1-9999s

  Standards Met: IEC/EN 61000-4-8, GB/T 17626.8

  Test duration: 1-28800s

  Generic Standards: IEC 61000-6-1, IEC 61000-6-2

  6-8 Weeks

  VIEW PRODUCT Cart

• 

  3ctest PFS 2216SVD Single Phase Power Fail Simulator w/ Two Semiconductor Switches for High Current Protection

  SKU: sku-591

  Weight: 40Kg

  Communication: Ethernet LAN、RJ45

  Coupling: BNC

  Dimensions: 19 inch/6U

  Dips, Interrupts & Variations: Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29

  Frequency: 45-65Hz

  General Data: Technical Details

  Input: BNC,5V TTL

  Mains & EUT Connections: 4mm banana line

  Maximum Continuous Power: 100W

  Output Current: 16A AC/DC continuous current; 20A continuous 5s 40Acontinuous 3s

  Peak inrush current capability: 500 Amps

  Phase synchronization: 0°- 360°，1° step or random

  Repetition time: 0.3-9999 cycle or 5ms-9999ms

  Rise time: 1-5us（100Ω load）

  Supply Voltage: 110V/220V, ±10%, 50/60Hz

  Test duration: 50ms-50000ms

  Test Voltage: 250V AC，300V DC

  Trigger: BNC,5V TTL

  VIEW PRODUCT Cart

• 

  3ctest PFS 2216SD Power Fail Simulator for EN/IEC 61000-4-11

  SKU: sku-590

  Test Standards: IEC/EN 61000-4-11, IEC/EN 61000-4-29

  Mains & EUT Connections: 4mm banana line

  Output Current: 16A AC/DC continuous current; 20A continuous 5s 40Acontinuous 3s

  Peak inrush current capability: 500 Amps

  Applications: EMC Precompliance Testing, Conducted Immunity

  Rise time: 1-5us（100Ω load）

  Test duration: 50ms-50000ms

  Test Voltage: 250V AC，300V DC

  Trigger: BNC,5V TTL

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  3ctest PFS 6030A Power Failure Simulator for Voltage Dips & Drops，60 V / 30 A

  SKU: sku-588

  Test voltage: Voltage drop: 1V max@30A

  Weight: 20 kg

  Dimensions: 19" / 4 U

  Output: DUT voltage monitoring output: BNC，10:1 coaxial terminal output DUT current monitoring output: BNC，10A:1V coaxial terminal output

  Peak current: 60A duration time 500 ms

  Pulse duration: Drop duration time td 1us - 10 s

  Repetition rate: 100 ms - 999s

  Source Impedance: High resistance or low resistance

  Test Voltage: 0–60 V

  Trigger: External trigger signal by oscilloscope, BNC,5V TTL

  Trigger of bursts: Automatic, manual, external

  VIEW PRODUCT Cart

• 

  3ctest EFT 500T Burst/EFT Simulator w/ Three Phase CDN

  SKU: 4559

  Applications: Conducted Immunity Testing, EMC on Medical Devices, CE Marking

  Standards Met: IEC 61000-4-4,IEC 61326,EN 61000-6-1,IEC 61850-3,EN 61000-6-2

  Built-in three phase CDN: AC 380V/16A; DC-1 220V/16A

  Output Voltage Range: 0.25 to 4.8kV

  Condition of Used (Scale 5 - 10): 8

  Pre Programmed Test Routines: Yes

  Cost New:

  Was:

  Price Now:

  $1,395.00 - $17,250.00

  In Stock

  ORDERING OPTIONS