EMC Test Equipment

EMC Test Equipment Test Equipment, Systems & Solutions

• 

  Amplifier Research FA7006 6 GHz E-Field Probe Kit

  SKU: 11933

  Test Standards: IEC 61000-4-3

  Accuracy: ±1.0dB @ 10MHz1 0.8dB, 100kHz–1GHz3,4 1.4dB, 1GHz–6GHz3,4

  Damage Level: 1000 V/m

  Dimensions: 5.7 x 5.7 x 5.7cm

  Linearity: ±0.5dB

  Minimum Pulse Width: 2μs

  Operating Range: 9 – 900V/m

  Rise time: Typical Analog 300nS

  Temperature Stability: ±1.0dB, 10°C - 40°C8

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Amplifier Research FP7018 3 MHz –18 GHz, 1000 V/m Electric Field Probe

  SKU: sku-914

  Dimensions: 420 x 85 x 65 mm including base and probe head.

  Weight: 350g Approximately

  Battery: Standard recharger included, 3 hour charge time.

  Damage Level: 1600 V/m CW and 16,000 V/m peak

  Data Transfer Rate: 30 samples per second

  Dimensions-2: 420 x 85 x 65 mm

  Operating Temperature: 0 to 50°C

  Power Requirements: 2 built-in NiMH batteries, size AA, Rechargeable, changed by operator, 40 hours operating life per charge.

  Probe Head Diameter: 65mm

  Probe Sampling Rate: 60Hz, 50Hz, 5 Hz- user selectable

  Ranges: Single continuous range

  Sensitivity: 0.6–1000 V/m

  VIEW PRODUCT Cart

• 

  Amplifier Research FM5004 E and H Field Monitor

  SKU: sku-912

  Display Interface: IEEE-488 Interface and RS-232 Interface

  Frequency Range: 10 kHz - 40 GHz

  Input: Up to 4 independent Probes

  Overload: Probe dependent

  Sensitivity: 0.15-3000 V/m; 15.0 mA/m - 30 A/m

  VIEW PRODUCT Cart

• 

  ETS-lindgren 3148 200MHz-2GHz Log Periodic Dipole Array Antenna

  SKU: 2514

  Weight: 2.0 kg (4.5 lb)

  Connector: Type N female

  Frequency Range: 200 MHz – 2 GHz

  Maximum Continuous Power: 1 kW

  VSWR: 1.2:1 average 2.0:1 maximum

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  DAMS 7000 40 GHz Antenna Positioner/Turntable System

  SKU: 31879

  Frequency Range: DC to 40 GHz

  Measurement Types: 2D, 3D, OTA, Far Field, Phase Center, Spherical

  Resolution: up to 0.0625º steps azimuth and 0.10º steps elevation

  Weight Capacity: 5, 10 or 25 Pounds (Spherical Mount Dependent)

  Software: DAMS Antenna Measurement Studio

  Inquire for Lead Time

  VIEW PRODUCT Cart

• 

  MIL-STD-461 RS103 Radiated Susceptibility Test System

  SKU: 122522

  Applications: Radiated Susceptibility

  Frequency Range: (4 kHz) 2 MHz - 40 GHz

  Field Strength: 200 V/m

  Industry: Military EMC Testing

  Test Standards: MIL-STD-461 RS103

  Typically In Stock

  VIEW PRODUCT Cart

• 

  3ctest APS 40C10 Automotive Battery & Pulse Simulator

  SKU: 22867

  Output Voltage: -40 to 40 Volts (.2V steps)

  Output Current: -10 to 10 Amps

  Product Overview (Video): ISO 16750-2 Electrical Load Tests using the APS Series

  Frequency Range: up to 300 kHz

  Bandwidth Response: 100 kHz

  Pre-Programmed Standards: All sections of ISO 16750-2, ISO 7637-2 Pulse 2B and 4,

  Application: Automotive and EV EMC Testing

  Additonal Test Capabilities: Magnetic Field Immunity acc. to Ford EMC-CS-2009, GMW3172, VW 80000, MBN 10284-4 and more

  IN STOCK

  VIEW PRODUCT Cart

• 

  Amplifier Research 500W1000A High Power RF Amplifier

  SKU: sku-859

  Frequency Range: 80 – 1000 MHz

  Output Power: 525 W minimum

  Gain: 57 dB minimum

  Flatness: ± 2.0 dB maximum ± 0.8 dB with internal leveling

  Input Impedance: 50 ohms, VSWR 2.0:1 maximum

  Typically In Stock

  VIEW PRODUCT Cart

• 

  150 Ohm Adapter Set for IEC 61000-4-6 Calibration Jig/BCI Test

  SKU: sku-856

  VIEW PRODUCT Cart

• 

  E&I / ENI 2100L RF Power Amplifier 10 kHz - 12 MHz, 100 Watts

  SKU: sku-844

  Connectors: BNC

  Cooling: Forced Air

  Flatness: ± 1.5 dB

  Frequency range: 10 kHz - 12 MHz

  Gain: 50 dB nominal

  Gain Flatness: +/- 1.5 dB

  Input: 104-240 Volts

  Input Power for Rated Pout: 0 dBm (1 mW)

  Output: 100 Watts P1dB

  Protection: Unit will withstand input signal of +13 dBm without damage (1.0 V rms) max.

  Rated Power: 100 Watts P1dB Compression

  RF Input Signal: AM, FM, SSB, Pulsed

  RF Input Voltage: 1 mW

  Cost New:

  Was:

  Price Now:

  $795.00 - $10,950.00

  In Stock

  ORDERING OPTIONS

• 

  Used Empower 800 MHz - 4.2 GHz, 13 Watt High Power RF Amplifier

  SKU: sku-843

  Weight: 30 LBs

  Dimensions: 19 x 3.5 x 18 in.

  Frequency Range: 800 - 4200 MHz

  Gain: 42 dB min

  Impedance: 50 ohms nominal

  RF Connector: Type N female

  VIEW PRODUCT Cart

• 

  Teseq CDN S900S RS-232 Coupling Decoupling Network for IEC 61000-4-6

  SKU: 10828

  Weight: 1.5 kg (3.3 lbs)

  Application/Test Type: Coupling / decoupling network (CDN) for screened data/telcom lines or coaxial cables

  Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω

  Current Rating: 250 mA (CDN ST08 1 Amp)

  Decoupling of Common Mode Disturbance: 150 kHz: Over 60 dB; 1.5 MHz: Over 60 dB; 30 MHz: Over 50 dB; 230 MHz: Over 40 dB (refer to data sheet for some exceptions)

  Dimensions: 4 x 4 x 9.5 inches (10 cm x 10 cm x 24 cm); (CDN HDMI and CDN S752A: 28.8 cm 11 inches)

  Frequency Range: 10 kHz to 80 MHz or 150 kHz to 230 MHz

  Mains & EUT Connections: BNC 50 Ω, N 50 Ω, BNC 75 Ω, N 75 Ω, XLR 3 pins, DIN 5 pins, RJ45, D-Sub 9 pins, D-Sub 15 pins, D-Sub 25 pins, HDMI (refer to data sheet for exact model specifications)

  RF Connector: BNC 50 Ω

  RF Input Voltage: 20 Volts Max

  Standards Met: IEC 61000-4-6, CISPR 22, IEC 60601-1-2

  Voltage Division Factor: 9.5 dB to 10 dB ±1 dB (refer to data sheet for some exceptions)

  Voltage Rating: AC max. voltage (line to ground): 100 V - 250V; DC max. voltage (line to ground): 150 V - 400 V; Test voltage: 200 V - 750 V DC, 2 sec (refer to data sheet for exact model specifications)

  Cost New:

  Was:

  Price Now:

  $1,190.00