CRAC Calibration Rail for Absorbing Clamps per CISPR 16

CRAC Calibration Rail for Absorbing Clamps per CISPR 16

Condition:
New
Weight:
110.3 lbs.
Dimensions:
232.2in. x 31.5in.
Online Orders Ship Same Day

 

Availability:

SHIPS IN 3-5 DAYS

SKU:
sku-2101

 

This product is available for shipping to North America and Western European countries.

Getting Started...

Check out our Google Reviews

Overview

The CRAC is a hand-operated slide lane for absorbing clamp MDS 21B. It consists of the slide lane, a table for the EUT and a drive unit. The drive unit enables the tester to move the MDS 21B manually along the lane. There are almost no metallic parts used for the construction.

Key Considerations

Weight:
110.3 lbs.
Dimensions:
232.2in. x 31.5in.

Related EMC Equipment & Solutions

Schwarzbeck MDS 21 CISPR 16 Absorbing Clamp

Schwarzbeck MDS 21 CISPR 16 Absorbing Clamp

SKU: 11781

Max Cable Diameter: 20mm
Max Current Handling: 30 Amps
Max RF Power Handling: 5 Watts
Frequency Range: 30 MHz - 1 GHz
Test Standards: CISPR 16
MSRP:
$4,950.00
Was:
$4,950.00
$3,500.00
In Stock
Teseq CDN M216 1kV CDN for CISPR 16-1-2, CISPR 16-2-1 and CISPR 15

Teseq CDN M216 1kV CDN for CISPR 16-1-2, CISPR 16-2-1 and CISPR 15

SKU: sku-86

Weight: 700 grams (1.5 LB.'s)
Application/Test Type: Emission measurement (CDNE) to measure disturbance voltages in the 30 to 300 MHz frequency range.
Common Mode Impedance: 150 Ω +10/-20 Ω
Current Rating: 10 Amps Maximum
Decoupling of Common Mode Disturbance: Greater than 30 dB
Dimensions: 4.1 x 3 x 5 inches (10.5 x 7.5 x 12.5 cm)
Frequency Range: 150 kHz to 230 MHz (Optional 10 kHz - 80 MHz)
Insertion Loss: Greater than 0.1 dB
Mains & EUT Connections: 4 mm, safety
RF Connector: BNC, 50 Ω
RF Input Voltage: Less than 30 V
Standards Met: IEC 61000-4-6, CISPR 16-1-2, CISPR 16-2-1 and CISPR 15
Voltage Division Factor: 20 dB ±1.5 dB
Voltage Rating: AC max. voltage (line to ground) / (line to line): 250 V / 433 V (CDN M216-1000V: 500 V / 1000 V); DC max. voltage (line to ground) / (line to line): 400 V / 800 V (CDN M216-1000V: 1000 V / 2000 V); Test voltage: 3 kV DC, 2 sec
View Product View Product
Rohde & Schwarz ESRP3 EMI Test Receiver per CISPR 16-1-1

Rohde & Schwarz ESRP3 EMI Test Receiver per CISPR 16-1-1

SKU: sku-695

Frequency Range: 9 kHz to 3.6 GHz
SSB Phase Noise: –90 dBc (1 Hz) (typ.)
Frequency Response: 9 kHz ≤ f < 100 kHz < 4 dB
Dynamic Range: RBW = 1 kHz, f > 10 MHz 110 dB
Harmonics, nonharmonic spurious: output level = –10 dBm –30 dBc
RF Output Connector: N female, 50 Ω
VSWR: 1.3, nominal
Inquire
View Product Cart
Teseq AMZ 41A Absorbing Clamp for CISPR 13 & 14, w/ LE 210 RF Cable

Teseq AMZ 41A Absorbing Clamp for CISPR 13 & 14, w/ LE 210 RF Cable

SKU: sku-568

Weight: approx. 7 kg
Application/Test Type: Disturbance power measurements of coaxial cables, automotive screened components (eg motor ignition systems and sheath current on aerial cables.
Clamp factor (CF): -4 dB to +5 dB
Current Rating: 25 Amps Max
Decoupling factor DF: Greater than 21 dB
Decoupling factor DR: Greater than 30 dB
Dimensions: W x D x H: 665 mm x 120 mm x 105 mm
Frequency Range: 30 MHz to 1000 MHz
Isolated lines under test: Power supply lines and other connecting lines
Max. Cable Diameter: 20 mm inner (10 mm with adapter)
Maximum Continuous Power: 10 Watts
Min. site attenuation: 13 dB to 22 dB
RF Connector: BNC, 50 Ω
Standards Met: CISPR 13, CISPR 14-1, CISPR 16-1-5, CISPR 16-2-2
View Product Cart

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form