Conducted Immunity

Conducted Immunity Test Equipment, Systems & Solutions

• 

  3ctest CWS 600CT Combination Wave & Telecom Surge Simulator, 1.2/50us 8/20us 10/700us 5/320us

  SKU: sku-333

  Polarity: Positive, Negative or Alternate

  Weight: Approx 15 kg (33 lbs)

  Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5

  Counter: 1-999

  Coupling: Optional for external SPN series CDN's

  Dimensions: 19 inch/6u

  Frequency Range: 50/60Hz±5%

  Front Time: Voltage: 10us±20%, time to half value: 700us±20%;

  Impedance: 2 phm, Optional 12 ohm and 500 ohm

  Mains & EUT Connections: 4mm banana plug

  Output Current: Front time: 5us±20%, time to half value: 320us±20%

  Polarity-2: Positive, Negative and Alternating

  Pulse current (short circuit): 0.15 kA–3.0kA ±10% （2ohm）

  Pulse Duration: 11s-99s （shortest depends on test voltage）

  Pulse repetition: 1-999

  Pulse voltage (open circuit): 0.3kV–6.0kV ±10%

  RF Connector: BNC, 5VTTL

  Standards Met: UL 1449, ANSI C62.41, IEC 61000-4-5, EN & IEC 60255-5, GB/T 17626.5

  Telecom Surge: As per FCC part 68, Pulse B, IEC 61000-4-5, ITU and ETSI recommendations

  Test duration: 6s-99s

  Test Voltage: 0.2kV–6.0kV,±10%

  Transfer Impedance: 15ohm, 40ohm （automatic switch)

  Voltage Rating: AC 110V/220V , ±10%,

  VIEW PRODUCT Cart

• 

  Electrical Fast Transient (EFT) Burst Immunity Component Level Test Setup

  SKU: 30044

  Bandwidth: DC to 500 kHz

  Sampling Rate: 3 Msps

  Resolution: 12 bit

  Applications: Burst/EFT Testing, EMC Precompliance Testing

  Test Standards: 61000-4-4

  In Stock

  VIEW PRODUCT Cart

• 

  Teseq NSG 3150 Combination Wave Surge Generator for IEC/EN 61000-4-5 up to 15 kV

  SKU: 10795

  Weight: Approx. 40 kg (88 lbs)

  Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5

  Coupling: IEC/external

  Dimensions: 449 (17.7”) x 328 (12.9”; 7 HU) x 565 mm (22.2”)

  Display Interface: 7“ touch-screen

  Impedance: 2/12 Ω

  Phase synchronization: asynchronous, synchronous 0 to 359º (in 1º steps)

  Polarity: pos / neg / alternate

  Pulse current (short circuit): ±250 A to 7.5 kA

  Pulse repetition: 20* .... 600 s (in 1 sec steps) 1 .... 10 min.

  Pulse voltage (open circuit): ±500 V to 15 kV (in 1 V steps)

  Supply Voltage: 85 to 265 VAC, 50/60 Hz

  Test duration: 1 to 9999 pulses, continuous

  Equipment Group: Combination Wave Generators

  Test Setup Overview: Surge Immunity Test, Setup, Equipment

  VIEW PRODUCT Cart

• 

  Teseq INA 6502 PQF/Dip Transformer for NSG 3060

  SKU: 3955

  Test Standards: IEC/EN 61000-4-11

  Compatible Generators: Teseq NSG 3060, Teseq NSG 3040

  Applications: Conducted Immunity

  Cost New:

  Was:

  Price Now:

  $549.00 - $1,600.00

  In stock

  ORDERING OPTIONS

• 

  AR CI00 Series RF Conducted Immunity Systems

  SKU: 10420

  Test Capabilities: RF Conducted Immunity

  Standards Met: IEC/EN 61000-4-6, CS114, ISO 11452-4, DO-160 CS"

  Applications: Radiated Immunity Debugging, CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

  CDN Test Levels (w/ built-in amplifier): 60Vrms

  BCI Test Levels (w/ built-in amplifier): 400mA/114 dBµA

  Frequency Range (w/ built-in amplifier): 9 kHz - 1 GHz

  VIEW PRODUCT Cart

• 

  Noiseken ESS-B3011 & GT-30R Electrostatic Discharge Simulator System for up to 30kV Testing

  SKU: 345

  Weight: Generator : Approx. 4.8kg Discharge gun : Approx. 800g ( excluding cable and connector)

  Standards Met: IEC 61000-4-2, ISO 10605

  Air Discharge Voltage Range: 0.20kV30.0kV±5%（30.5kVmax）

  Battery: AC100V to AC240V ±10% 50Hz／60Hz 62VA

  Contact Discharge Voltage Range: 0.20kV30.0kV±5%（30.5kVmax）

  Polarity: positive/negative

  Pre-Programmed IEC Levels: Yes

  Resolution: Air discharge mode : 2.0kV, 4.0kV, 8.0kV and 15.0kV step Contact discharge mode : 2.0kV, 4.0kV, 6.0kV and 8.0kV step

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Haefely PEFT 8010 High Voltage EFT/Burst Generator, 7.3kV

  SKU: 22006

  Application/Test Type: Approval testing, Product development, Post design diagnostics, Industrial, Household

  Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4

  Burst frequency: 1 Hz … 110 kHz (Duration 0.01 - 999 ms)

  Burst time: 0.1 Hz - 400 Hz; 2.5 ms - 10 s; 1 period - 500 periods

  Coupling: Built-in Single Phase AC 264 Volts / 16 Amps 50-60Hz, 10 Amps from 16 - 400 Hz; 125V/10A DC (Modes: L-GND, N-GND, PE-GND, LN-GND, LPEGND, NPE-GND, LNPE-GND)

  Pulse amplitude: 1.0 to 7.3kV (6.6 kV at CDN Output)

  Repetition time: Impulses per second: max. 250 for Unom over 4 kV; Impulses per burst: max. 500 for Unom 4 kV

  Standards Met: IEC/EN 61000-4-4 Ed. 1 + 2, IEC 61326, EN 61000-6-1, IEC 61850-3, EN 61000-6-2

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  EM Test EFT 500N5.8 Burst Generator up to 4.8kV, w/ Built in 3-Phase Coupler, IEC 61000-4-4

  SKU: sku-293

  Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4

  VIEW PRODUCT Cart

• 

  EM Test Dito ESD Simulator up to 16.5 kV for IEC/EN 61000-4-2

  SKU: 10645

  Voltage Range: 500V - 16,500V +/-5%

  Electrostatic Discharge: Pulse conforms to IEC 61000-4-2 edition 2

  Holding Time: More than 5 seconds

  Resolution: 100V steps

  Rise Time: 0.8ns +/- 25%

  Supply Voltage: More than 70,000 pulses @ 16.5kV; automatic power-off after 10 minutes if not operated LiFePo4 12.8V - 1000mAh

  Trigger: Automatic + Manual

  VIEW PRODUCT Cart