NoiseKen 06-00067A ESD Current Target Calibration Set

NoiseKen 06-00067A ESD Current Target Calibration Set

Condition:
Used

No reviews yet Write a Review
Manufacturer:
Noiseken

 

Availability:

INQUIRE

SKU:
11037

 

Getting Started...

Check out our Google Reviews

Overview

NoiseKen 06-00067A ESD Current Target Calibration Set. Load resistor to measure, verify and calibrate ESD current waveform defined in IEC61000-4-2 Ed.2.0.

Parameter Specifications
300kHz-1GHz ±0.5dB
1GHz-4GHz ±1.2dB
Conversion ratio 2V/1A (50Ω termination)
Mass Approx. 400g

Videos

Key Considerations

Manufacturer:
Noiseken

Related EMC Equipment & Solutions

CST1 ESD Current Target Calibration Kit DC - 4 GHz, 30 kV - The EMC Shop

CST1 ESD Current Target Calibration Kit DC - 4 GHz, 30 kV

SKU: 8539

Frequency Response: DC – 4 GHz S21 < ± 0.5 dB up to 1 GHz, < ± 1.2 dB up to 4 GHz
Input resistance: 1.00 Ohm - ± 1% 1.00 Ohm when match with 50 Ohm load
Max. IEC Pulse Amplitude: Verified up to ± 30 kV
Voltage Non-linearity: < 2% up to 20 kV, < 5% up to ± 30 kV
Standards: IEC 61000-4-2, ISO 10605, and many more
$475.00 - $5,940.00
In stock
ORDERING OPTIONS
ECO2G Oscilloscope

ECO2G 2 GHz EMC Calibration Oscilloscope ESD Gun Verification

SKU: 5501

Sample Rate: 5 GSa/s (10 GSa/s ESR) ADC per analog channel
Record Length: up to 500 Mpts
Waveform Capture Rate: Up to 750,000 wfm/s (Sequence mode)
Pre-Programmed Settings: IEC 61000-4-2 150pF/330 Ohm, All four R/C Combinations of ISO 10605
Vertical Scales: 0.5 mV/div to 10 V/div
Interfaces: USB Hosts, USB Device (USBTMC), LAN（VXI-11/Telnet/Socket, micro SD card, Pass/Fail, Trigger Out, HDMI
Protocol Capabilities: Serial bus triggering and decoder - I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S, MIL-STD-1553B, SENT, and Manchester
$395.00 - $10,950.00
IN STOCK
ORDERING OPTIONS