Overview
The Robot R-ABC allows the stepless adjustment of the accelerator and brake pedal inside EMC Chambers preferably in combination with chassis dynamometers.
The R-ABC can be controlled directly from NCD controller with the software included.
The control allows the adjustment and storage of different test cycles and applications.
The NCD and drive unit are located outside the chamber and is only connected to the actuator with two compressed air tubes in order to avoid any EMC emissions.
| Technical Data | |
| Stroke distance accelerator adjustable | 0 to 100 mm |
| Strength | 200 N |
| Stroke distance brake adjustable | 0 to 125 mm |
| Strength | h 350 N |
| Stroke distance clutch adjustable | 0 to 150 mm |
| Strength | 350 N |
| Power consumption | 208-230 VAC, 50/60 Hz, single-phase |
| Current | approx. 0.5A |
| Fuse | T 2A, 250V |
| Compressed Air Supply | via pressure regulator and ½ inch quick connector |
| Signal Pressure | 0.2 – 1.0 bar |
| Nominal Pressure | 5 bar |
| Lengths of lines | Air tube 5 m from Dynamometer to Robot |
| Operating Temperature | 5°C to 40°C |
| Total weight of actuator | approx. 25 kg |
