Ametek CTS

Ametek CTS Categories

Amplifier Research

EM Test

Instruments for Industry (IFI) Amplifiers

Teseq (Schaffner)

Ametek CTS

EM Test TSS 500N4 Telecom Surge Generator as per ITU / FCC up to 4 kV

SKU: sku-402

Weight: approx. 20 kg (44 lbs.)

AC Power Adapter: Supply voltage 115/230 V +10/-15%

Dimensions: 19"/3HU

Standards Met: IEC 61000-4-5 ITU-T K.17 ITU-T K.20 ITU-T K.28 ITU-T K.45 (and more)

Voltage Rating: 160 V - 4,000 V ±10%

VIEW PRODUCT Cart
EM Test (Lüthi) CDN S1 for 50 kHz to 230 MHz

SKU: sku-400

Weight: 2.0 lbs

Application/Test Type: Coupling/decoupling networks for Conducted immunity, screened lines (coaxial cable)

Current Rating: 1.5 Amps

Dimensions: 7.25 x 4.25 x 4.25 inches

Frequency Range: 150 kHz to 230 MHz

VIEW PRODUCT Cart
EM Test UCS 500M4 Transient Simulator w/ Burst/EFT

SKU: 34111

Applications: EFT/Burst Testing, Dips Interrupts & Variations, EMC Precompliance Testing

Standards Met: IEC 61000-4-4, IEC 61000-4-11

Max EUT AC Voltage (w/ Built in CDN): 250 Volts

Max EUT AC Current (w/ Built in CDN): 16 Amps

Max EUT DC Voltage (w/ Built in CDN): 250 Volts

Inquire for Availability

VIEW PRODUCT Cart
Teseq NSG 435 ESD Gun

SKU: 11449

2 reviews

Test Standards: IEC 61000-4-2

Applications: Medical, Commercial Electronics, IT, and more

Test Capabilities: Air/Contact up to 15kV

Pre-programmed Test Limits: Yes

More Resources: Test Setup, ESD Waveform, RMA Form

Cost New:

Was:

Price Now:

$590.00

In Stock

ORDERING OPTIONS
Rent Amplifier Research AR 5S1G4 RF Power Amplifier

SKU: sku-308

Frequency Range: 800 MHz to 4.2 GHz

Gain: Max Range: 37 dB; Continuous Range: 10 dB

Output Power: 8 Watts at nominal 3 dB compression/ Minimum 5 Watts at 1 dB compression

Condition (Scale 5-10): 9

Cost New:

Was:

Price Now:

$295.00

In stock

ORDERING OPTIONS
Amplifier Research (AR) ATR80M6G Wide Band, High Gain Log Periodic Antenna

SKU: 2657

Max RF Input Power: 5,000 Watts

Antenna Factor (1 Meter): 14 to 67 db/m (±1.5 dB)

Application/Test Type: Radiated Immunity Testing

Dimensions: 132.1 x 20.32 x 97.8 cm (52 x 8.0 x 38.5 in)

Frequency Range: 80 MHz - 6 GHz

Cost New:

Was:

Price Now:

$1,275.00

Typically In Stock

ORDERING OPTIONS
EM Test CWS 500N2.2 BCI Test System

SKU: 21252

Test Capabilities: RF Conducted Immunity

Standards Met: MIL STD 461 CS 114, DO-160 CS Test

Applications: Vehicle, Military and Aerospace, BCI Testing

BCI Test Levels (w/ built-in amplifier): 400mA/114 dBµA

Frequency Range (w/ built-in amplifier): 9 kHz - 400 MHz

Typically In Stock

VIEW PRODUCT Cart
Teseq CDN 3083-Surge 620 Volt, 100-200 Amp Manual Coupler

SKU: sku-220

Weight: 80 kg (176 LB's)

Application/Test Type: Manual Surge Testing for EUT up to 100Amps, 620 VAC; Three phase (5 wire); Two phase (4 wire); Single phase (3 wire)

Current Rating: 100 Amp or 200 Amp continous depending on model

Dimensions: 850 x 520 x 345 mm

Mains & EUT Connections: Fischer 105 series; Screw terminals, rated for 230 A

VIEW PRODUCT Cart
Teseq RFC 2020 RF-Switch

SKU: sku-151

VIEW PRODUCT Cart
Teseq RFB 2000 RF-Switch

SKU: sku-150

VIEW PRODUCT Cart
Teseq CMAD 20B Common Mode Absorption Device, 1 MHz to 1 GHz, up to 20 mm Cable

SKU: 10141

Weight: approx. 3.4 kg

Dimensions: (LxWxH): 670 mm x 78 mm x 58 mm

Frequency Range: 1 MHz to 1 GHz

Max. Cable Diameter: 20 mm

Standards Met: IEC/EN 61000-4-20;CISPR 13;CISPR 14-1;CISPR 15;CISPR 16-1-4;CISPR 16-2-3;CISPR 22;CISPR 32;EN 61000-6-3;EN 61000-6-4;IEC 60533

Cost New:

Was:

Price Now:

$395.00

In Stock

ORDERING OPTIONS
Teseq CMAD 10 Common Mode Absorption Device for CISPR 22

SKU: sku-140

Weight: approx. 1.7 kg

Application/Test Type: Disturbance mode testing ideal for GTEM test cells for radiated emission and immunity testing.

Dimensions: (LxWxH): 293 mm x 63 mm x 40 mm

Frequency Range: 30 MHz to 1000 MHz

Standards Met: IEC/EN 61000-4-20

VIEW PRODUCT Cart