Test Applications

Test Applications Test Equipment, Systems & Solutions

• 

  LFCI4-16/19 Test Generator for Common and Differential Mode Disturbances

  SKU: 11995

  Test Standards: IEC 61000-4-16, IEC 61000-4-19

  Frequency Range: DC, 0.05Hz - 300 kHz; resolution 0.05 Hz

  Slew Rate: 100 V/µs

  Internal Power Amplifier: 250 Watts

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Keysight N1914A EPM Series RF Power Meter

  SKU: 10939

  Frequency Range: DC to 120 GHz (sensor dependent)

  Dynamic Range: -70 to +44 dBm (sensor dependent)

  Interfaces: GPIB, LAN LXI-C and USB connectivity

  Channels: 2 (Expandable to 4)

  Cost New:

  Was:

  Price Now:

  $695.00 - $6,295.00

  In Stock

  ORDERING OPTIONS

• 

  Amplifier Research PL7004 800MHz - 3.6GHz Electric Field Pulse Laser Powered Probe

  SKU: 11935

  Amplitude Accuracy: Without correction factors applied: ±1.5 dB @ 1 GHz; With correction factors applied: Typical expanded measurement uncertainty (95% confidence interval), 0.8 dB, 800 MHz–1 GHz; 1.4 dB, 1GHz–3.6 GHz

  Damage Level: 1000 V/m, Continuous Field or Pulsed Field

  Frequency Range: 800MHz - 3.6GHz

  Isotropic Deviation: ±1.0 dB @ 1 GHz. For improved accuracy, this probe should be used with a single axis aligned with the E-field being measured.

  Operating Range: 80–800 V/m

  Pulse Duration: 0.02% to 2%

  Pulse Period: Up to 5 milliseconds between pulses (greater than 200 Hz pulse rate)

  Pulse Width: 1 to 100 Microseconds

  Relative Flatness: ±2.5 dB, 800 MHz-3 GHz; ±3.0 dB, 3.0GHz 3.6GHz

  Temperature Stability: +0.5 dB Over Operating Temperature Range

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Monthly Rental EM Test CWS 500N Continuous Wave Simulator for IEC 61000-4-6

  SKU: sku-921

  Weight: 17 kg (37.5 Pounds)

  Application/Test Type: Create and output RF currents as well as measure input for CDN and clamp calibration as well as current monitor for clamp applications

  Dimensions: 19"/3 HU

  Frequency Range: Sinus (CW) 100kHz to 300MHz Frequency bands 100kHz to 9.999MHz 10MHz to 99.99MHz 100MHz to 300MHz

  Impedance: 50 Ohms

  Input: 115 V to 230 V +10/-15 %, 50/60 Hz (380 Watts Max)

  Maximum Continuous Power: 80W (nominal)

  Standards Met: IEC 61000-4-6

  Test Routines: Quick Start, User Test Routines, Standards Test Routines (IEC/EN 61000-4-6), Cal Procedure, Service

  Voltage Rating: 1 V to 30 Volts Max

  VIEW PRODUCT Cart

• 

  Boonton 4541 Single Channel Front Panel Input RF Power Meter

  SKU: sku-916

  Cost New:

  Was:

  Price Now:

  $5,200.00

• 

  Boonton 59318 500 MHz - 18 GHz Wideband Peak Power Sensor

  SKU: sku-915

  Rise Time: Slow: 350 kHz

  Dynamic Range: -24 to +20 dBm -34 to +20 dBm -10 to +20 dBm

  Frequency Range: 500 MHz - 18 GHz

  Impedance: 50 ohm

  Overload: 1 W for 1µs 200 mW

  Rise time: Fast: 50 MHz typical

  VIEW PRODUCT Cart

• 

  Narda Broadband E-Field Meter Kit, 100 kHz - 50 GHz

  SKU: sku-885

  Weight: 10.6 oz.

  Application/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.

  Battery: NiMH rechargeable batteries 4 x AA size (Mignon), 2500 mAh

  Dimensions: 1.5 x 2.0 x 8 inches

  Frequency Range: 100 kHz - 60 GHz

  Operation Time: 20 hours (backlight off, no GPS) 12 hours (permanent backlight, no GPS) 10 hours (GPS receiver connected, no backlight)

  Recharging Time: 2 hours

  Standards Met: IEC 61000-4-3

  Cost New:

  Was:

  Price Now:

  $595.00 - $2,495.00

  Typically In Stock

  ORDERING OPTIONS

• 

  DAMS 7000 40 GHz Antenna Positioner/Turntable System

  SKU: 31879

  Frequency Range: DC to 40 GHz

  Measurement Types: 2D, 3D, OTA, Far Field, Phase Center, Spherical

  Resolution: up to 0.0625º steps azimuth and 0.10º steps elevation

  Weight Capacity: 5, 10 or 25 Pounds (Spherical Mount Dependent)

  Software: DAMS Antenna Measurement Studio

  Inquire for Lead Time

  VIEW PRODUCT Cart

• 

  MIL-STD-461 RS103 Radiated Susceptibility Test System

  SKU: 122522

  Applications: Radiated Susceptibility

  Frequency Range: (4 kHz) 2 MHz - 40 GHz

  Field Strength: 200 V/m

  Industry: Military EMC Testing

  Test Standards: MIL-STD-461 RS103

  Typically In Stock

  VIEW PRODUCT Cart

• 

  3ctest APS 40C10 Automotive DC Transient Pulse Simulator

  SKU: 22867

  Output Voltage: -40 to 40 Volts (.2V steps)

  Output Current: -30 to 30 Amps

  Source Impedance: < 10mΩ

  Frequency Range: up to 300 kHz

  Bandwidth Response: 100 kHz

  Pre-Programmed Standards: All sections of ISO 16750-2, ISO 7637-2 Pulse 2B and 4,

  Application: Automotive EMC Testing

  Additonal Test Capabilities: Magnetic Field Immunity acc. to Ford EMC-CS-2009, GMW3172, VW 80000, MBN 10284-4 and more

  IN STOCK

  VIEW PRODUCT Cart

• 

  Mil-STD-461 RS103 Electric Field Generator Test Setup

  SKU: 12853

  Max Field Strength: 500 V/m

  Frequency Range: (10 kHz) 2 MHz - 100 MHz

  RF Connectors: 7/16 female

  Test Standards: MIL-STD-461, DO-160

  Industries: Military and Aviation EMC

  Applications: Radiated Susceptibility Testing

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Agilent N8487A 50MHz to 50GHz Power Sensor

  SKU: sku-846

  VIEW PRODUCT Cart