Test Type Categories
Test Type Test Equipment
- 
            RFT-24A EMI Tent for Radiated Emissions TestingSKU: 8895 Attenuation: 90 dB typicalFrequency Range: (150 kHz) 30 MHz - 18 GHzStandard Options: Lights and VentEnclosure Size: 24' x 11' x 8'Frame Size: 25' x 12' x 8.5IN STOCK
- 
            3ctest CST 20150D IEC 61000-4-39 Conducted Immunity TesterSKU: 55121 Test Standards: IEC 61000-4-39, IEC 61000-4-6Applications: Conducted Immunity2-3 Months
- 
            Wavecontrol WPF6-HP Electric Field Probe for SMP MetersSKU: 4423 Frequency range: 100 kHz - 6 GHzResolution: 0.02 V/m (until 7.5 V/m), 0.1 V/m (from 7.5 V/m to 130 V/m)Dynamic Range: 70 dBSensitivity: 0.3 V/mMeasurement Range: 0.3 – 1000 V/m (CW), 0.3 – 20 V/m (RMS)$695.00 - $995.00In Stock
- 
            ABL6G Active Bilog Antenna for Radiated EmissionsSKU: 23630-1 Applications: Radiated Emissions, Military & Aviation EMC TestingTest Standards: FCC Part 15, MIL-STD-461Frequency Range: 25 MHz - 6 GHzConnector: N-type (to Analyzer/Receiver)Typically In Stock
- 
            AE Techron T2000 Low-Frequency Conducted Susceptibility TransformerSKU: 8758 Applications: LF Conducted SusceptibilityTest Standards: DO 160 Sec 16 & , Mil-STD 461 CS 101 & CS 109Frequency Range: 10 Hz to 250 kHzRF Power: 200 WattsTypically In Stock
- 
            EM Test Voltage Transient Emissions Tester AN 200SKU: 1226 Voltage Range: 0-30 VDCRated Current: 25 APeak Voltage: 1000 VDimensions: Dimensions: (L x B x H): 425 x 530 x 180 mmInductance: (5 µH/5 mΩ)In stock
- 
            RFPM1G-1000 Digital Power Meter with Directional CouplerSKU: 4044 Frequency Range: 20 MHz to 1 GHzRF Power Rating: 1000 WApplications: Radiated Immunity, RF Conducted ImmunityIn Stock
- 
            Inquire for Lead Time
- 
            EM Test VCS 500 M10 10kV Combination Wave Surge Immunity GeneratorSKU: 17287 Test Standards: IEC/EN 61000-4-5, IEC/ISO 60601-1-2Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5Application Notes: EMC Surge Immunity Test Setup, CE MarkingMains & EUT Connections: External Coupler OnlyPhase synchronization: asynchronous, synchronous 0 to 359º (in 1º steps)Typically In Stock
- 
            Boonton 4232A 2 Channel RF Power MeterSKU: 30075 Measurement Range: 10 kHz to 100 GHzDynamic Range: 90 dB (sensor dependent)Power Measurement Range: -70 dBm to +44 dBmApplications: Radiated Immunity, RF Conducted ImmunityChannels: 2Typically in Stock
- 
            TDK EFG-03 High Power E-Field Generator 10 kHz - 100 MHz, up to 500 V/mSKU: 9091 Weight: 68 kg (150 lbs.)Connector type: 7/16 femaleTest Standards: MIL-STD-461 RS103, DO-160Applications: Radiated SusceptibilityBuilt in Load: YesTypically In Stock
- 
            EM Test LD 200N Load Dump Generator for ISO 16750-2SKU: 5955 Output: +/- output Safety laboratory connectors Coupling To the battery +lineDecoupling Via diodeDUT supply Max. 80V/30AFreestyle Mode Micropulses: Rise time 1us 10us - 90us with 10us steps 100us - 900us with 100us steps 1ms - 10ms with 1ms steps Pulse duration 10ms - 1,200ms Int. resistor 0.5ohm - 38ohm, in steps of 0.1ohmTest Standards: ISO 7637-2 Pulse 5b for 12V and 24V, ISO/WD 16750 Pulse 5b, and much moreTest Routines: Quick Start, User Defines Routines, Standards Test Routines Service$1,690.00 - $2,290.00Typically In Stock
 
 
               
               
               
               
               
               
               
               
               
               
               
               
               
               
               
                 
                 
                 
                 
                 
                 
                 
                 
                 
                 
                