Test Application Categories
Test Application
-
Schloder VIS 1700 Voltage Interruption Simulator
SKU: 21784
Communication: BNC outputs (on rear) for voltage, current and scope triggeringCoupling: BNCDips, Interrupts & Variations: Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29General Data: Technical DetailsMains & EUT Connections: 4mm banana lineTypically In Stock -
LISN-CISPR25-800 Artificial Mains Network (AMN) for Electric Vehicles
SKU: 22141
EUT Current Handling: 800 AmpsEUT Voltage Handling: 1,000 Volts DC (400V 50/60Hz, 300V 400 Hz)Applications: Conducted Emissions, BCI Testing , Automotive EV EMCTest Standards: CISPR 25, MIL-STD-461, ISO 21498-2, ISO 11452-4, DO-160, DEF-STAN-59, ECE R10Additional Test Standards: ISO 7637-2, ISO 7637-4,2-4 WEEKS -
Amplifier Research FA7040/Kit Electric Field Analyzer
SKU: sku-1755
Test Standards: IEC 61000-4-3Application/Test Type: Radiated Immunity, Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF roomsFrequency Range: 2 MHz - 40 GHzTypically In Stock -
Teseq PA 5740 Power Amplifier/Battery Simulator for ISO 7637
SKU: 10491
Standards Met: ISO 7637-2, ISO 16750-2Applications: Automotive EMC Testing, Electric Vehicle Compliance TestingBandwidth: up to 180 kHzInquire for Availability -
Rent EM Test VDS 200N10 Automotive Battery Source and Voltage Drop Simulator, 60 V/10 A
SKU: sku-244
Common Mode Impedance: Pulses 4 and 2b (ISO 7637-2/ISO 16750-2) -
-
-
Teseq NSG 5500-2 Automotive Immunity Expandable Test System up to Five Transient Modules
SKU: sku-160
Applications: Automotive Electrical Disturbances, EV EMC TestingStandards Met: ISO 7637Max EUT DC Voltage (w/ Built In CDN): 60 VoltsMax EUT DC Current (w/ Built In CDN): 30 AmpsPeak Inrush Current Capability: 300 Amps -
AH Systems AK-18G Antenna Kit for FCC, MIL-STD, VDE and TEMPEST Testing up to 18 GHz
SKU: 7149
Applications: Radiated Immunity, Radiated EmissionsStandards Met: FCC, MIL-STD-461, VDE, TEMPEST TestingAntenna Case Dimensions: 28" x 23" x 10"Tripod Case Dimensions: 46" x 8" DiameterInquire for Availability -
EMC Partner CDN-KIT1000 ED3
SKU: 35425
Standard: IEC 61000-4-5Application: surge on 2 unsymmetrical linesTest level surge: max. 6 kVEUT voltage per line: max. 200 V DC or 240 V peakEUT current per line: max. 4 A cont. or 5 A for 5 min.Typically In Stock -
EM Test OCS 500N6F Simulator for Fast/Slow Damped Oscillatory Waves and Ringwave
SKU: 10413
Burst duration: 50 ms ±20%, at 3 MHz 15 ms ±20%, at 10 MHz 5 ms ±20%, at 30 MHzDamping Rate: Peak 5 to be more than 50% of peak 1 value Peak 10 to be less than 50% of peak 1 valueOscillation Frequency: 3 MHz, 10 MHz and 30 MHz, ±10%Source Impedance: 50 ohm ±20%Voltage: Voltage (o.c.) at HV output 450 V - 4,400 V ±10%Inquire -
3ctest SG 5010H 10kV Surge Simulator for IEC 61000-4-5, GB/T, ITU-T K21/K44
SKU: sku-326
Polarity: +/-, positive first or negative firstWeight: Approximately 300 kgCombination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5Coupling: 1 or 3 Phase 16 Amps 250V/450VImpedance: 500Ω±10％