Teseq RF Test Equipment Test Equipment, Systems & Solutions
-
Used Teseq PM 6006 1 MHz to 6 GHz RF/EMC Power Meter
SKU: 3462
Current rating: 100 mA at 5 VFrequency Range: 9 kHz – 3 GHzRF Connector: N male 50 ΩStandards Met: IEC/EN 61000-4-3 IEC/EN 61000-4-6Supply Voltage: min. 4.7 V / max. 9 VIn Stock -
-
Teseq PMU 6003 USB Power Meter/Sensor 9 kHz - 3 GHz
SKU: sku-606
Current rating: 100 mA at 5 VFrequency Range: 9 kHz – 3 GHzRF Connector: N male 50 ΩStandards Met: IEC/EN 61000-4-3 IEC/EN 61000-4-6Supply Voltage: min. 4.7 V / max. 9 V -
Radiated Immunity Test System for IEC 61000-4-20 TEM Waveguides
SKU: 10393
Application/Test Type: Radiated Susceptibility TestingFrequency Range: 30 to 1000 MHzMax Radiated Field Strength: Lowest field strength: 1 V/m at 600 mm septum height* Highest field strength: approx. 18 V/m at 600 mm septum height*Maximum Continuous Power: Lowest forward power: 15 dBm* Highest forward power: 41 dBm*Test Standards: MIL-461 RS103, IEC/EN 61000-4-3, ISO 11452-2, DO-160 Section 20 -
-
-
Teseq VBA 6106A Biconical Antenna 30 MHz - 300 MHz
SKU: sku-131
Weight: approx. 1.3 kgDimensions: (L x H x W in mm): approx. 1360 X 770 X 515Frequency Range: 30 MHz to 300 MHzImpedance: approx. 6 kgRF Connector: N type female -
Teseq DPA 4000A Compact Biconical Antenna 200 to 1000 MHz
SKU: sku-127
Weight: 690 gDimensions: (L x W x H): 185 mm x 400 mm x 155 mmFrequency Range: 200 MHz to 1000 MHzImpedance: 50 Ω, nominalRF Connector: N female -
Teseq DPA 3000 Biconical Dipole Antenna 800 to 2800 MHz
SKU: sku-125
Impedance: 50 OhmsWeight: 180 gramsAntenna Factor (1 Meter): 30 dB/m to 38 dB/m (0.8 GHz to 2.5 GHz)Antennas: Dipole AntennasConnector: N femaleDimensions: (L x W x H): 155 mm x 155 mm x 75 mmFrequency Range: 800 MHz to 2800 MHzGain: -2.0 dB to +1.5 dB (0.8 GHz to 2.5 GHz)Impedance-2: 50 Ω, nominalStandards Met: CISPR 13, CISPR 14-1, CISPR 16-1-4, CISPR 16-2-3, CISPR 22, CISPR 32, EN 61000-6-3, EN 61000-6-4VSWR: Under 2.5:1 (1.0 GHz to 2.5 GHz) -
Teseq LNA 6018 Low Noise Amplifier 1 GHz to 18 GHz
SKU: sku-83
Weight: 220 grams (0.3 Lbs)Application/Test Type: Significantly increase the sensitivity of virtually all spectrum analyzers and other RF measuring instrumentsConnector: IN: SMA female 50 Ohms; OUT: SMA male 50 OhmsDimensions: 39 mm x 88 mm x 36 mmFrequency Range: 1 GHz - 18 GHzGain: 22 dB typical (± 3 dB flatness)Input: less than -10 dBmVSWR: less than 2:1 typical -
Teseq LNA 6901 Low Noise Amplifier 9 kHz to 1 GHz
SKU: sku-82
Weight: .27 Lb's (127 grams)Application/Test Type: Increase the sensitivity of virtually all spectrum analyzers and other RF measuring instrumentsConnector: N-type 50 OhmsDimensions: 28 mm x 95 mm x 27 mmFrequency Range: 9 kHz to 1 GHz (nominal range); 9 kHz to 2 GHz (utilizable range)Gain: 28 dB typical (±1 dB flatness)Input: -20 dBm (87 dBμV)Maximum Continuous Power: +8 dBm @ 1 dB compressionVSWR: Less Than 1.5:1 -
Teseq LNA 6900 Low Noise Amplifier 9 kHz to 2 GHz
SKU: sku-81
Weight: 0.27 Lb's (127 grams)Connector: N-type 50 OhmsDimensions: 28 mm x 95 mm x 27 mmFrequency Range: 1 MHz to 3 GHz (nominal range); 200 kHz to 4 GHz (utilizable range)Gain: 12.5 dB (±0.3 dB flatness)Input: 0 dBm (107 dBμV)Maximum Continuous Power: Greater than 12.5 dBm @ 1 dB compressionVSWR: less than 1.5:1