Standards Categories
Standards Test Equipment
-
Teseq NSG 4070B Conducted & Radiated Immunity Test System
SKU: 11159
Test Capabilities: RF Conducted ImmunityStandards Met: IEC/EN 61000-4-6Applications: Radiated Immunity Debugging, CE Marking, Medical Devices, Industrial Machinery, Electronics & ITCDN Test Levels (w/ built-in amplifier): NoneBCI Test Levels (w/ built-in amplifier): NoneTypically In Stock -
Com-Power LI-3P-132 150kHz to 30MHz Three-Phase Line Impedance Stabilization Network
SKU: sku-598
Weight: 30 lbs.Application/Test Type: Power Line Conducted Emissions TestsCurrent Rating: 32 AmperesFrequency Range: 150 kHz to 30 MHzInductors: 50 µH$6,495.00 -
Teseq ISN T4A Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs
SKU: sku-159
Frequency Range: 150 kHz to 80 MHzRF Input Voltage: 15 V -
3ctest TSS-2430 Vehicle Mounted Multimedia Voltage Disturbance Simulation Generator
SKU: sku-1688
Test Standards: VW 80972Applications: Automotive EMC TestingInquire -
Haefely DEC 6 Decoupling Network for Symmetrical Data and Control Lines
SKU: 0481
Weight: approx. 2 kg netCoupling: Decoupling elements Resistors 200 OhmDimensions: 30 x 20 x 16 cm (w x h x d)DUT current: Current on EUT lines max. 0.1APulse amplitude: max. 6.6kV$250.00 - $1,500.00In Stock -
Teseq ISN T8 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs
SKU: 10161
Weight: 550 grams (1800 grams with storage case)Application/Test Type: 1000BaseT and Power Over Ethernet (PoE) testing of 1 up to 4 pair(s) of unscreened balanced communication linesCommon Mode Impedance: 150 Ω ±20 ΩCurrent Rating: 600 mA (line), 1200 mA (pair)Decoupling of Common Mode Disturbance: ≥35 dB to ≥55 dB/≥55 dBT -
PMM L3-64 3-Phase, 64 Amp LISN for FCC Part 15
SKU: 10057
Weight: 50 kg (110 pounds)Application/Test Type: Ancillary device intended for repeatable and accurate measurement of the disturbance voltage that an EUT (Equipment Under Test) may inject into the power line or mains.Current Rating: 63 Amps MaxDimensions: 465 x 450 x 740 mm (18 x 17.7 x 29 inches)Frequency Range: 9 kHz to 30 MHz -
3ctest CWS 1000N 10kV Surge Generator for IEC/EN 61000-4-5
SKU: sku-798
Weight: Approx 44 kg (97 lbs)Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5Dimensions: 19 inch/6uImpedance: 2 OhmPhase synchronization: 0°-360°, 1°step or random -
Rent Rohde & Schwarz ESU40 EMI Test Receiver for CISPR and MIL-STD Testing
SKU: 30082
Frequency Range: 20 Hz to 40 GHz (DC coupled), 10 MHz to 40 GHz (AC coupled)Frequency Resolution: 0.01 HzFrequency Counter Resolution: 0.1 Hz to 10 kHzTest Standards: CISPR 16-1-1, MIL-STD-461Applications: Conducted Emissions, Radiated EmissionsInquire for Lead Time -
Teseq ISN S501A Impedance Stabilization Network for Coaxial Lines
SKU: sku-171
Weight: approx. 1.5 kgDimensions: (W x H x D): 100 mm x 100 mm x 240 mmFrequency Range: 150 kHz to 230 MHzImpedance: 150 Ω ±20 ΩRF Input Voltage: 20 V -
TWT18G-250 8 GHz - 18 GHz, 250 Watt RF CW Amplifier
SKU: sku-2218
Weight: 75 lbsDimensions: 19W x 25D x 8.75HFrequency range: 8.0 – 18.0 GHzGain: 54 dBRated Power: 250 watts -
Schwarzbeck ISN S8 Impedance Stabilization Network
SKU: 8857
Connector to EUT: RJ45 connector | CAT 6 CableMax Voltage Handling: 150 VDC | 100 VACMax Current Handling: 1 AmpApplication: Shielded Data Lines Conducted Emissions Measurements$1,800.00In Stock