Standards Categories
Standards Test Equipment
-
Zimmer LMG95 Single Phase Power Analyzer
SKU: 7058
Standards Met: IEC 61000-3-2, IEC 61000-3-3,Additional Standards Met: IEC 61000-3-11, IEC 61000-3-12Measurement Range: 600V (1600 V peak) and 20A (960 A peak for the measurement of inrush currents)Applications: Conducted Emissions$365.00 - $3,650.00Typically In Stock -
3ctest DFS 4002A Signal / Data Line Failure Simulator DFS
Test Standards: LV 124 / LV 148Power Supply Range: AC 110 V / 220 V±10%, 50/60 Hz±5%Max Power: 200 WDimension: 19”/ 4 UWeight: About 18 Kg -
3ctest DMS 200 Differential-Mode Conducted Disturbances
Frequency Range: 2 kHz to 150 kHzMax. Current: 5 AmpsLoad Impedance: 1 Ω, ±0.3 ΩWeight: Approx. 20 kgTest Standards: IEC 61000-4-19INQUIRE -
Frankonia Core-6 EMI Receiver 9 kHz–6 GHz
SKU: 52535
Frequency ranges: 9 kHz – 30 MHz and 30 MHz – 6 GHzFully compliant: acc. to CISPR 16-1-1Fast measurements: by new digital designIntegrated: 20dB pre-amplifierIntegrated pulse limiter: Up to 30 MHzIn Stock -
Com-Power CLCE-438 RF Current Monitoring Probe
Top Frequency Range: 400 MHzBottom Frequency Range: 9 kHzApplications: RF Current Monitoring, EMC BCI Tests, Military EMC TestingRF Current Handling (CW/Pulse): 3/800 AmpsTest Standards: DO-160 Section 20, MIL-STD-461In Stock -
$235.00In Stock -
3c-test 7637-4R500/120 Load Resistor Isolation Capacitor Shielded Enclosure
SKU: 21971
Port of Front Panel: DC port, LISN portPort of Rear Panel: Resistor, capacitor short circuit outputShielded Effect: ＞80 dBAmbient Temperature: 15 ℃~35 ℃Relative Humidity: 45% ~ 75%In Stock -
GTEM 450 Cell for Radiated Immunity & Emissions Testing up to 20 GHz
SKU: 12297
Test Standards: MIL-461 RS103, IEC/EN 61000-4-3, ISO 11452-2, DO-160 Section 20CALL FOR LEAD TIME -
NEO Messtechnik PQA8000 Mobile Power Quality Analyzer
SKU: 30178
Applications: Flicker and Harmonics MeasurementTest Standards: IEC 61000-3-2, IEC 61000-3-3Battery Life: 4 hoursBandwidth: Up to 1 MHzAccuracy: 0.05%INQUIRE -
EMIC-35 Current Injection Clamp for RF Conducted Immunity Testing
SKU: sku-2132
Weight: approx. 14 kgApplication/Test Type: Injects the disturbance signal through a combination of inductive and capacitive couplingClamp factor (CF): -.6 dB at 100 kHz to -2.2 dB at 1 GHz (Min -4 dB at 700 MHzConnector: N-type femaleDimensions: 666 mm x 135 mm x 120 mm -
Fischer Custom Communications FCC LISN-50/250/25-2 Line Impedance Stabilization Network
SKU: 2219
Current Rating: 25 AmperesFrequency Range: 0.009 - 100MHzNetwork Inductance: 50Ω/50µH + 5Ω 50/250 µHMains & EUT Connections: Multi-Contact Safety SocketRF Connector: Multi-Contact Safety SocketRENTAL ONLY -
TWT18G-300 8 GHz - 18 GHz, 300 Watt RF CW Amplifier
SKU: sku-1882
Weight: 70 lbsDimensions: 19W x 25D x 8.75HFrequency range: 8.0 – 18.0 GHzGain: 55 dBRated Power: 300 watts