Test Equipment by EMC & Compliance Standards

Standards Categories

CE Mark Testing

FCC Part 15

International (IEC/EN)

Automotive EMC Standards

Telecom Testing

Standards by Product/Industry

Standards Test Equipment, Systems & Solutions

Schwarzbeck VUSLP 9111-400 Log Periodic Antenna

SKU: 11119

CALL FOR LEAD TIME

VIEW PRODUCT Cart
Teseq MD 102A ESD Pulse Measurement Target for IEC/EN 61000-4-2

SKU: sku-887

Inquire for Lead Time

VIEW PRODUCT Cart
Com-Power LI-220C 9 kHz - 30 MHz LISN for CISPR 16-1-2/ANSI C63.4

SKU: 10878

Weight: 20.5 lbs / 9.3 kg

Application/Test Type: Power line conducted emissions tests

Current Rating: 20 Amperes AC, 14 Amperes DC

Dimensions: 16.75 x 15.5 x 7.5 inches / 42.5 x 39.3 x 19 cm

Frequency Range: 9 KHz - 30 MHz

Inductors: 250 & 50 microhenry (air-core)

Insertion Loss: 6 dB to 1 dB

Isolation: 20 dB to 40 dB

Mains & EUT Connections: Superior Electric SUPERCON® shrouded sockets

RF Connector: 50Ω N-type (female)

Standards Met: CISPR 16-1-2 / ANSI C63.4

Voltage Rating: 270 VAC (Line to Ground), 380 VDC

Cost New:

Was:

Price Now:

$295.00 - $3,965.00

Typically In Stock

ORDERING OPTIONS
Solar 7054-2 EMI Voltage Spike Generator

SKU: 30184

Test Standards: DO-160 SECTION 17, MIL-STD-462

Applications: EMI/EMC For Military Aircraft And Aviation

Spike Amplitude: 10 - 400 Volts

Spike Repetition Rate: 0.8 - 10 Pulses Per Second

Spike Rise Time: 10 microseconds

RENTAL ONLY

VIEW PRODUCT Cart
Teseq CIP 9136A Bulk Current Injection Test Clamp

SKU: 8766

Weight: 2 kg (4.4 pounds)

Aperture: 43 mm (1.7 inches) inside; 113 mm (4.44 inches) outside

Application/Test Type: Injecting current levels up to 1 kW per Qinetiq and meets HIRF testing Ideal for automotive BCI testing

Connector: N-Type up to 1,000 Watts

Dimensions: 61 mm wide (2.4 inches)

Frequency Range: Features & Specifications of Teseq CIP 9136A:

Impedance: 100 Ω typical at resonance

Standards Met: ISO 11452-4, IEC 61000-4-6

Additional Standards Met: RTCA DO-160 Section 20, MIL-STD-461

Cost New:

Was:

Price Now:

$440.00 - $4,400.00

Typically in Stock

ORDERING OPTIONS
EM Test Automotive Test System for ISO 7637-2

SKU: 10596

ISO Automotive Standards: ISO 7637-2, ISO 16750-2, ISO 11452-8

SAE Automotive Standards: SAE J1113, SAE J1455

Freestyle Mode Micropulses: Programmable Rise time 1us - 10us in steps of 1us; Pulse duration 50us - 10,000us; Int. resistor 2ohm - 100ohm in steps of 5ohm; 200ohm, 400ohm and 450ohm

Input: DUT supply +/- DC voltage from VDS 200N or any other DC supply; Pulse 5, 7 From one LD 200N

Micropulse: Micropulse module for test pulses 1, 2A and 6

Trigger: automatic, manual, external, battery switch

UCS 200N Models: Built-in coupling/decoupling networks: UCS 200N50, 80V/50A, 100A@500ms; UCS 200N100, 80V/100A, 150A@500ms; UCS 200N150, 80V/150A UCS 200N200 80V/200A

Verification: As per Annex C of ISO 7637-2:2011 into 50ohm and 1,000ohm load

Applications: EMC Testing on EV Electric Vehicles Batteries & Charging Stations, Automotive Electrical Disturbances

Inquire for availability

VIEW PRODUCT Cart
Keytek E503 Ring Wave Simulator for ANSI/IEEE C62.4 and UL 864

SKU: 10546

Pulse current (short circuit): Selectable at 200A max. or 500A max., when the open-circuit voltage is set to 6.0kV.

Pulse repetition: 1 shot/9 seconds

Pulse voltage (open circuit): 200V - 6.6kV ± 10%

Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41

Standards Met: ANSI/IEEE C62.41 Cat. A and B, and various UL standards, including UL 864

Equipment Group: Ring Wave Generators/Simulators

IN STOCK

VIEW PRODUCT Cart
Schaffner CDN 8014 Burst/EFT Coupling Clamp for EN/IEC 61000-4-4

SKU: 10545

Compatible Generators: EFT Generators Electrical Noise/Transient Immunity

Standards Met: IEC/EN 61000-4-4

Cost New:

Was:

Price Now:

$2,990.00

Inquire for Availability
Materials for EFT/Burst Laboratory Test Setup

SKU: 11245

Floor Ground Plate Dimensions: 9" by 6" (Custom sizes available)

Standards Met: IEC 60601-1-2, IEC 61000-4-2

Applications: Test Setup for Burst/EFT, EMC Precompliance Immunity Testing

Table Dimensions: .8 meters (H)

Table Top Ground Plane: 1.6m x .8m

Additional App Notes: EFT Waveform Verification, Troubleshooting EFT Failures

IN STOCK

VIEW PRODUCT Cart
Noiseken ESS-S3011A & GT-30RA Electrostatic Discharge Simulator System for up to 30kV Testing

SKU: 8250

Weight: Approx. 7.0kg (gun holder excluded) Approx. 7.5kg (gun holder included)

Air Discharge Voltage Range: 0.20kV to 30.0kV±5%（30.5kVmax）10.0kV : 0.01kV step 30.0kV : 0.1kV step

Standards Met: IEC 61000-4-2, ISO 10605

Battery: AC100V to AC240V 50Hz／60Hz ±10% 75VA

Contact Discharge Voltage Range: 0.20kV to 30.0kV±5% （30.5kVmax） 10.0kV : 0.01kV step 30.0kV : 0.1kV step

Polarity: positive/negative

Pre-Programmed IEC Levels: Yes

Resolution: 10 Volt steps up to 10 kV; 100 Volt steps to 30 kV

Typically In Stock

VIEW PRODUCT Cart
Monthly Rental Teseq (Schaffner) CDN T002 Coupling Network for Unshielded Balanced Pairs

SKU: sku-318

Application/Test Type: EMC testing for unscreened data communication/telecom lines (Power over Ethernet, 1100BaseT4, 100Base VG-AnyLan, 1000BaseT, Token ring, ISDN, 10BaseT, 100BaseTX, ATM, FDDI, TP-PMD

Current Rating: 1.5 Amps (3/5 Amp models available)

Frequency Range: 150 kHz to 230 MHz (limited to 80 MHz on 3/5 Amp models)

Mains & EUT Connections: Banana, XLR, RJ45, RJ11

RF Connector: BNC, 50 Ω

RF Input Voltage: 30 Volts Max

Standards Met: IEC 61000-4-6

Voltage Rating: AC max. voltage (line to ground): 63 Volts DC max. voltage (line to ground): 100 Volts Test voltage: 200 VDC, 2 s

Cost New:

Was:

Price Now:

$99.00

ORDERING OPTIONS
Em Test CWS 500N1.4 RF Conducted Immunity Test System for IEC 61000-4-6

SKU: 11251

Test Capabilities: RF Conducted Immunity

Standards Met: IEC/EN 61000-4-6

Applications: Radiated Immunity Debugging, CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

CDN Test Levels (w/ built-in amplifier): 40Vrms

BCI Test Levels (w/ built-in amplifier): 8Vrms

Frequency Range (w/ built-in amplifier): 150 kHz - 230 MHz

Typically In Stock

VIEW PRODUCT Cart